GPowers
 Offline
Location: West Coast, USA Member Since: Mar 2010
Posts: 1669
Metric convert
|
 |
« Reply #420 on: January 06, 2011, 03:27 PM » |
|
Here is a picture for the calendar.
I talked to a guy that was using his MFT/3 at the top of a lift. He was installing some kind of wood ceiling up so 20 to 25 feet in the air. Originally he was going up to measure and fit and then coming down to cut. The MFT/3 up in the list saved a tremendous amount of time on the job. His boss was very happy. Oh the MFT/3 and the idea to use it was the employees not the Boss's.
|
|
|
|
|
Logged
|
Greg Powers
Size:XL
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
harry_
Offline
Location: Middleton, NH Member Since: Nov 2009
Posts: 1067
|
|
« Reply #421 on: January 06, 2011, 11:36 PM » |
|
Still want Fog T shirts  How about a calendar of something that looks good in a T shirt  |
|
|
|
|
Logged
|
Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).
|
|
|
PaulMarcel
Offline
Location: Chandler AZ USA Member Since: Mar 2008
Posts: 1179
|
|
« Reply #422 on: January 07, 2011, 12:55 AM » |
|
Still want Fog T shirts How about a calendar of something that looks good in a T shirt Harry is on to something. Since it's for the FOG, perhaps Festool tees, gently torn. |
|
|
|
|
Logged
|
Visit my blog for Festool adventures Shirt size: L  Twitter: @HalfInchShy |
|
|
Corwin
 Online
Location: Washington State, USA Member Since: Jan 2007
Posts: 1996
|
|
« Reply #423 on: January 07, 2011, 01:07 AM » |
|
I can help tear.
I'll be gentle.
(you did say "something that looks good in a T shirt," didn't you?)
|
|
|
|
« Last Edit: January 07, 2011, 01:10 AM by Corwin »
|
Logged
|
Shirt Size: L
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #424 on: January 07, 2011, 04:18 AM » |
|
Patience Feshoppers. Blue boxes first then...
|
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Corwin
Online
Location: Washington State, USA Member Since: Jan 2007
Posts: 1996
|
|
« Reply #425 on: January 07, 2011, 05:30 AM » |
|
MacGyver, overwelmed by their presence, probably looks at those boxes and thinks, "wonder how much yellow I need to add to leave a stain that's Festool green?"  . |
|
|
|
|
Logged
|
Shirt Size: L
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #426 on: January 07, 2011, 08:15 AM » |
|
MacGyver, overwelmed by their presence, probably looks at those boxes and thinks, "wonder how much yellow I need to add to leave a stain that's Festool green?" . Actually he has become quite attached to those boxes but will soon be suffering separation anxiety. I wouldn't be surprised to see a pic or two over the weekend and maybe even some other good news! Peter |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
tlflorek
Offline
Location: Indianapolis, IN Member Since: Jan 2011
Posts: 13
|
 |
« Reply #427 on: January 07, 2011, 09:25 AM » |
|
I'm a newbie to the FOG. Any chance there will be unspokenfor systainers for sale?
|
|
|
|
|
Logged
|
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #428 on: January 07, 2011, 10:36 AM » |
|
 to the FOG! I have a couple of Fogtainers that might be available but have a couple of members already asking for those. If that doesn't work out, then I will post their availability here on the forum in the classified section. My guess is that if that happens they will go fast, so check back often. Peter
|
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #429 on: January 07, 2011, 05:38 PM » |
|
Had fun today... Note that ceiling height is 12 feet. My wife will be overjoyed to still be able to see her Christmas tree! She does have 12 feet x 300 feet of bubble wrap as a bonus!  Run MacGyver Run!   |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
GPowers
Offline
Location: West Coast, USA Member Since: Mar 2010
Posts: 1669
Metric convert
|
|
« Reply #430 on: January 07, 2011, 05:42 PM » |
|
That is a LOT of FOGtainers  |
|
|
|
|
Logged
|
Greg Powers
Size:XL
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #431 on: January 07, 2011, 05:47 PM » |
|
Those are only 25% of the total. Picked these up from the printer and then came home and L and I applied labels. Guys, don't be afraid of these labels falling off!
Peter
|
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
RL
Offline
Location: Canada Member Since: Feb 2010
Posts: 2124
|
|
« Reply #432 on: January 07, 2011, 05:47 PM » |
|
That is a LOT of FOGtainers I'd like to see the systainer they were shipped in! |
|
|
|
|
Logged
|
I like green.
|
|
|
Ken Nagrod
Restricted
Offline
Location: New Jersey Member Since: Jul 2010
Posts: 3438
|
|
« Reply #433 on: January 07, 2011, 06:01 PM » |
|
Mac's growing pretty fast compared to his picture.
Peter, that upwards shot of the Fogtainers is perfect for the possible future calendar (front or rear cover shot?).
|
|
|
|
|
Logged
|
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #434 on: January 07, 2011, 06:07 PM » |
|
That is a LOT of FOGtainers I'd like to see the systainer they were shipped in! Richard, No systainer for the Fogtainers - just cardboard. The ones in the photos above were the ones already in the US. Previously I posted pictures of the fogtainers from Germany. The stack behind the boxes are in addition to what I shot in my living room.  |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Wood_Junkie
Offline
Location: Madison, Wisconsin - USA Member Since: Dec 2009
Posts: 1304
|
|
« Reply #435 on: January 07, 2011, 06:16 PM » |
|
All you need now is a 5000mm rail to lean on them.  Not to be impatient, but does this mean the labelled Fogtainers will be shipping soon?  |
|
|
|
|
Logged
|
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #436 on: January 07, 2011, 06:30 PM » |
|
Hint: My wife wants my living room empty very soon. There will be a second batch of labelled ones based on the responses to the emails sent. I also have 120 boxes sitting in my office for shipping and a new label printer.
Oops, the boss is coming home now. Gotta go hide!
Peter
|
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #437 on: January 07, 2011, 07:43 PM » |
|
Mac's growing pretty fast compared to his picture.
Peter, that upwards shot of the Fogtainers is perfect for the possible future calendar (front or rear cover shot?).
Ken, Thank you for the compliment on the photo. Mac is slowing down in his growth spurt. The vet was shocked when he gained 8 pounds in three weeks. The avatar photo was taken a couple weeks before Christmas. His photos are deceptive due to his body structure. He is now about 40 lbs. He is all muscle and long legs. Lying down he looks like a typical Golden. Once he stands, he looks tall and thin. I frankly thinks that he confuses the camera. See below, all these were taken the same day - 12/30/2010.    By the way, these pictures were taken with a Fuji Finepix HS10 camera I bought my wife for Christmas. Although it is not an interchangeable lense DSLR, it has a 24 - 720 mm lens and manual zoom. I shoot in RAW format and then adjust in Adobe Camera Raw. Peter |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Dovetail65
Offline
Location: UNITED STATES (US) Member Since: Feb 2008
Posts: 3864
|
|
« Reply #438 on: January 07, 2011, 08:41 PM » |
|
A real dog! My golden is now 13 months old and a solid 80lbs of pure muscle, if anything the vet said he is a bit lean. His paws are as big or bigger than my hands. I had no idea how smart and strong these dogs are. They love freezing weather and snow too, at least mine does. No wonder they use these as sled dogs now, the strength to size ratio is unbelievable. The only other dog I ever had or saw as smart was my old Doberman. I think my Golden may be smarter in some ways though. Bentley is just a bit hyper, about the only thing I can think of negative, but with 6 kids he is well played with! Gorgeous dog you have there! Nice snout, not to thin  . Looks like his leg wings are just coming in, wait for the mane he will get, I love these dogs. |
|
|
|
« Last Edit: January 07, 2011, 08:44 PM by nickao »
|
Logged
|
The one who says it can't be done should avoid interrupting the person doing it.
|
|
|
Ken Nagrod
Restricted
Offline
Location: New Jersey Member Since: Jul 2010
Posts: 3438
|
|
« Reply #439 on: January 07, 2011, 08:51 PM » |
|
A real dog!
My golden is now 13 months old and a solid 80lbs of pure muscle, if anything the vet said he is a bit lean. His paws are as big or bigger than my hands.
Forget pictures of your dog Nick, let's see the hands! Are we talking like the Burger King commercial?  |
|
|
|
|
Logged
|
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #440 on: January 07, 2011, 08:59 PM » |
|
Nick, Goldens are extremely smart. We were experimenting the other night with him and his toys. Each of his toys has a name. He was able to go and get his toys by name - about 50% of the time. He will probably not look like a typical golden. He is partly English Golden - still allowed by the AKC and based on his parents will not be as fluffy. Our last golden was pretty much white and had wings / feathers that trailed the ground. Thank goodness for the Dyson vacuum  . My goal is to get him to the point that when we have a Fogger National Get Together he will sit and shake hands with members and their kids alike. And even like Shane  . Sedge would try to kidnap him, but Minnie would win! Thanks for the compliments. He read every word. Peter |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Dovetail65
Offline
Location: UNITED STATES (US) Member Since: Feb 2008
Posts: 3864
|
|
« Reply #441 on: January 07, 2011, 09:11 PM » |
|
I'll try to get some paw pics, he stays still very well. I can do anything to him it is quite unbelievable. I can cut his nails, clean his ears, etc he does not move. l I think he likes it. And yeah he is so smart, I am stuck on Golden's now forever.
What is funny he was the last pup left and was the runt of the litter and a bit dark to be a show dog I guess, but we are so happy with him. We bought him as a family dog anyway not a show dog. I think the size at birth is deceiving because he grew larger than some of the largest pups in the litter. And the dog is so compact you would never guess his weight if you saw him, its like a mass of muscle. People usually guess around 60lbs. Not sure if that is right for a show quality, but again he is our family dog and part of the family.
I truly never had a dog I loved before, he is the first.
|
|
|
|
|
Logged
|
The one who says it can't be done should avoid interrupting the person doing it.
|
|
|
Alan m
Offline
Location: Ireland Member Since: Aug 2010
Posts: 2998
|
|
« Reply #442 on: January 07, 2011, 09:20 PM » |
|
I truly never had a dog I loved before, he is the first.
Aaaaaawwwwwwwww  |
|
|
|
|
Logged
|
now
ts 55+2 1400 rails+ 1 lr32 1400 rail, domino+assortment systainer+ domiplate, ct 22 with boom arm+home made thien baffel, lr32 set, rotex 150, home made MFT,home made work center, 6 t locs for other tools, of2000 , ro 90, mft 800, trion , ls 130
wish list
of 1400, MFT 3,, even more t locs for other tools
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #443 on: January 07, 2011, 09:30 PM » |
|
Nick,
Just wait. Eleven months from now he / she will be so more different. You will have a chair at the table for him/her! You will find out that the cnc programming language manual will be missing ...
|
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Dovetail65
Offline
Location: UNITED STATES (US) Member Since: Feb 2008
Posts: 3864
|
|
« Reply #444 on: January 07, 2011, 09:54 PM » |
|
Oh dam, he already ate a crown I spit out, cost me 500.00! And he is a shoe stealer. We always find the shoes in his crate or in a corner under his pillow, half chewed of course! Yesterday he stole my 8 year old daughters underwear and came flying around the corner with her running after him 1/2 naked, I never laughed so hard in my life! It's like he new it was funny! You can tell when he is is up to something he has that mischievous look! Or the look like he knows he did something wrong. I want a plaything for him and my wife won't have it. Just one more! I can't wait until he gets older and even smarter, but I do not think my wife will have him at the table, though he sat on a chair at the table when we sang happy B-day to him. DO you thunk he will be smart enough to set up my spindle and VFD.  |
|
|
|
« Last Edit: January 07, 2011, 09:59 PM by nickao »
|
Logged
|
The one who says it can't be done should avoid interrupting the person doing it.
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #445 on: January 07, 2011, 10:10 PM » |
|
Copy the manuel and give it to him. Either he will work it out or mother nature will work it out  . Compost. |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
allen r austin
Festool Dealer
Offline
Location: Woodcraft, Roanoke Va. Member Since: Feb 2010
Posts: 71
|
|
« Reply #446 on: January 12, 2011, 09:45 PM » |
|
Great dog!!
I have a German shepherd (is this too much German?) any way, I like the shirt idea. and if you will email me the pic of the fog label i will take it to the people that make our company shirts and get me one made! and if you like them we can send them out to any fog member who wants one
this company has about 1000 things they can embroidery on. The calendar idea sounds good too. Whatever you think is best.
|
|
|
|
|
Logged
|
expensive , how much did the one cost that doesn't work?
|
|
|
waynelang2001
Offline
Location: south africa Member Since: Feb 2010
Posts: 486
|
|
« Reply #447 on: January 13, 2011, 01:40 AM » |
|
Hey Peter,
Glad to see things are finally on track, any chance that you got my email regarding which FOGtainer labeling i would prefer?
|
|
|
|
|
Logged
|
|
|
|
RvB
Offline
Location: Holland Member Since: Jan 2011
Posts: 195
|
|
« Reply #448 on: January 13, 2011, 03:31 AM » |
|
Hi guys, Can i get one as well?  Do you foggers ship to Holland? THANKS!! |
|
|
|
|
Logged
|
ALLREADY GOT:Domino XL DF 700 - CS70 precisio - Kapex 120 EB - TS 55 EBQ Saw - EHL 65E - PS 300 EQ - OF 1010 EBQ - OFK 500 R3 - CTL 26 E - CTL Midi - BS 75 e-set - DTS 400 EQ - ROTEX 90 - FS SYS/2 - FS 1400/2 x2 - FS 800/2 - FS Bag
D 36 HW RS craftsman cleaning kit - D27/D36 portable cleaning kit - RO90 & DTS 400 abrasive sys - Festool & Protool tool-box - carpenter sys - Fein supercut sys - homemade drills&drivers sys - nailguns sys5 -SYS-CART RB-SYS
WORKIN' REALLY HARD FOR: UG-KA-SET - OF 1400 - ETS 125 - ROTEX 125 - Boom Arm - FS/2 3000
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6405
|
|
« Reply #449 on: January 13, 2011, 07:28 PM » |
|
Hey Peter,
Glad to see things are finally on track, any chance that you got my email regarding which FOGtainer labeling i would prefer?
Wayne, Yes I did. Hope that you are feeling better! Peter |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
|
