Author Topic: Guide bush for OF 1010  (Read 979 times)

0 Members and 1 Guest are viewing this topic.

Offline Ker1ken2

  • Posts: 2
Guide bush for OF 1010
« on: September 08, 2017, 01:23 PM »
Where can I get a 13mm guide bush for OF 1010 please

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Bert Vanderveen

  • Posts: 348
Re: Guide bush for OF 1010
« Reply #1 on: September 08, 2017, 01:34 PM »
Nearest size FS offers is 13,8 mm. Part# 484176.
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 Mk2 · MFT/3 + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 EQ · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · PSB300 · LR32-SYS · RO150 · Kapex KS120 · MFK700 · RO90 · OFK700  … | Hammer A3 31 Silent Power · Hammer N4400 

Offline Nat X

  • Posts: 231
Re: Guide bush for OF 1010
« Reply #2 on: September 08, 2017, 10:01 PM »
The 1010 doesn't require Festool branded bushings, but 13 is not a common size.

Offline Peter_C

  • Posts: 438
Re: Guide bush for OF 1010
« Reply #3 on: September 09, 2017, 12:04 AM »
Where can I get a 13mm guide bush for OF 1010 please
13mm = 1/2" So here ya go! They typically come in a set of 9 pieces.
http://www.portercable.com/Products/AccessoriesDetail.aspx?ProductID=16409

Offline antss

  • Posts: 1182
Re: Guide bush for OF 1010
« Reply #4 on: September 09, 2017, 10:31 PM »
Where can I get a 13mm guide bush for OF 1010 please
13mm = 1/2" So here ya go! They typically come in a set of 9 pieces.
http://www.portercable.com/Products/AccessoriesDetail.aspx?ProductID=16409


this isn't quite accurate.

12.7mm = 1/2 " 

Now, you might say .3mm is close enough; but it might not be depending on what your making.  Compounding to .6mm in some operations.

Offline ear3

  • Posts: 3236
Re: Guide bush for OF 1010
« Reply #5 on: September 11, 2017, 03:29 PM »
Something else to keep in mind is that the standard, Festool branded guide bushing insert is notoriously difficult to center due to how snug it fits in the base.  A workaround for this is to get the guide bushing adapter made by Leigh for the 1010, model number 704R, which has enough play where you can easily center it with a mandrel.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • DX 93 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline ben_r_

  • Posts: 725
Re: Guide bush for OF 1010
« Reply #6 on: September 11, 2017, 04:23 PM »
Something else to keep in mind is that the standard, Festool branded guide bushing insert is notoriously difficult to center due to how snug it fits in the base.  A workaround for this is to get the guide bushing adapter made by Leigh for the 1010, model number 704R, which has enough play where you can easily center it with a mandrel.
That issue is only for the OF 1010 correct? The OF 1400 isn't the same setup so it's not as difficult to center IIRC.
If at first you don't succeed, redefine success!

Offline antss

  • Posts: 1182
Re: Guide bush for OF 1010
« Reply #7 on: September 11, 2017, 10:08 PM »
Correct , the 1400 has a different mount.

Offline Sparktrician

  • Posts: 3317
Re: Guide bush for OF 1010
« Reply #8 on: September 12, 2017, 05:04 PM »
Something else to keep in mind is that the standard, Festool branded guide bushing insert is notoriously difficult to center due to how snug it fits in the base.  A workaround for this is to get the guide bushing adapter made by Leigh for the 1010, model number 704R, which has enough play where you can easily center it with a mandrel.

Concur!!! 
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young