Author Topic: MFT story fence  (Read 1462 times)

0 Members and 1 Guest are viewing this topic.

Offline jjowen

  • Posts: 91
MFT story fence
« on: April 15, 2018, 07:06 PM »
Sometimes I wanted to repeatedly cut to a couple of different dimensions, but not necessarily a given dimension all at the same time. By adding one or two more side stops to the fence, I have created a 'story fence' and can quickly flip down the appropriate stop, without having to re-set anything.

The only limitation is the width of each stop stops you having two too close.
Disclaimer: All posts after 12:00pm on Fridays (GMT+10) should be independently verified for relevance and veracity.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Mike S

  • Posts: 30
Re: MFT story fence
« Reply #1 on: April 15, 2018, 08:34 PM »


The only limitation is the width of each stop stops you having two too close. (Attachment Link)

If you need two close together, I think I have seen the stop installed "backwards" with the flag reversed so it falls right.  That means getting two flags within a half inch of each other.  Could potentially make it closer if you change the socket head caps to button heads ...

Also, this is a *great* idea.

Offline tjbnwi

  • Posts: 5682
  • Cedar Tucky Indiana
Re: MFT story fence
« Reply #2 on: April 15, 2018, 09:57 PM »
If you need to go out farther the UG wings fit the MFT 3.

Tom

Offline jobsworth

  • Posts: 5186
  • Does Anyone Know What Time It Is?
Re: MFT story fence
« Reply #3 on: April 16, 2018, 09:41 PM »
I got 9 or 10 flag stops they come in very handy

Offline DynaGlide

  • Posts: 185
Re: MFT story fence
« Reply #4 on: April 17, 2018, 08:42 AM »
I only have 2 but more useful was adding some tape to the fence calibrated to the rail. No more measuring so no more errors.