Author Topic: Origin of Centrotec system  (Read 1108 times)

0 Members and 1 Guest are viewing this topic.

Offline Svar

  • Posts: 1559
Origin of Centrotec system
« on: October 29, 2018, 09:56 PM »
Does anybody remember when Centrotec system was first introduced (year)?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Michael Kellough

  • Posts: 3605
Re: Origin of Centrotec system
« Reply #1 on: October 29, 2018, 11:33 PM »
Not sure but it was when FOG was still a Yahoo user group. Guessing around 2005...

Offline Corwin

  • Posts: 2641
Re: Origin of Centrotec system
« Reply #2 on: October 29, 2018, 11:37 PM »
Must be a little before that; my 2005 catalog has the Centrotec but it isn't with the 'NEW' items.
Looks like your rabbit joint is a hare off! ;)

Offline neeleman

  • Posts: 1208
Re: Origin of Centrotec system
« Reply #3 on: October 30, 2018, 04:27 AM »
My CDD 9,6 FX is from 2004 and already has a FastFix and Centrotec chuck.
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline magellan

  • Posts: 185
Re: Origin of Centrotec system
« Reply #4 on: October 30, 2018, 05:15 AM »
I agree with Neeleman.  I made a large Festool purchase that yr and still have every tool and all still working well. The CCD does need batteries but it would work. 

Offline Alex

  • Posts: 5729
Re: Origin of Centrotec system
« Reply #5 on: October 30, 2018, 05:31 AM »
I have a CDD 12 FX drill that's from 2001 and has centrotec.  And I have a CDD 12/1 drill also from 2001 without centrotec.

So I think 2001 was the year.

Offline Michael Kellough

  • Posts: 3605
Re: Origin of Centrotec system
« Reply #6 on: October 30, 2018, 07:11 AM »
The Centrotec chuck came after the introduction of Fast Fix didn’t it?

Offline DeformedTree

  • Posts: 216
Re: Origin of Centrotec system
« Reply #7 on: October 31, 2018, 10:19 PM »
This thread got me curious about "centrotec" again to look up what it is.  Thanks to Peters video.   I see many things referring to it as "Centrotec Standard" so is this something Festool submitted to ISO/DIN/ANSI/SAE/ILRI for standardization. Or are they just falsely using the world "standard" in there.

It looks like a nice refinement to bit attachments. But I can see it not going anyplace without becoming an actual standard.

Based on the timelines here, it will have its patents if it has any expire shortly. Which would generally mean most companies would A) make a design change to the protect, re-patent, repeat.  B) accept it will expire soon, and formally submit to a standards org for consideration while they have control over the design instead of letting it get standardized after the fact with everyone throwing in their ideas/changes to it.

Offline demographic

  • Posts: 382
Re: Origin of Centrotec system
« Reply #8 on: November 01, 2018, 09:33 PM »
Its one of the thngs I just don't "get" to be honest.
Maybe if I could get a better selection of bits at a reasonable price from the local builders merchants I'd be more interested but for me 1/4" hex is more use.
Especially when ironmongery manufacturers are such numpties and needing to use four different types of bit to fit one bleedin Salto lock (pozi 2, Philips 2, an allen/hex I cant remember the size of and a Torx I cant remember the size of) Jeez, have some standardization.
People keep saying that centrotec has less runout when spinning, which may well be true but they must be in a world where all the screws have perfect heads cos I'm not seeing a significant differance working as a full time site carpenter.