Author Topic: ro 150 FEQ sanding pads  (Read 524 times)

0 Members and 1 Guest are viewing this topic.

Offline donduck2

  • Posts: 2
ro 150 FEQ sanding pads
« on: February 09, 2018, 11:33 AM »
I am about to order a new pad for my rotex 150 feq.  Not sure whether to get the soft, medium, or hard.  Any opinions?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline grobkuschelig

  • Posts: 407
Re: ro 150 FEQ sanding pads
« Reply #1 on: February 09, 2018, 11:57 AM »
I like the hard one, especially if you want to keep edges sharp.
But I have a medium on the Rotex as well and a soft on the ETS, there is a reason they make these, they fit different purposes.

So think about what you‘ll most likely need to do and take it from there.
If you do not require the new and improved Jetstream 2, there are currently a lot of good prices for the last version on eBay, at least here in Germany..

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8577
  • Finger Lakes Region, NY State , USA
Re: ro 150 FEQ sanding pads
« Reply #2 on: February 09, 2018, 12:02 PM »
Hi,

  Welcome to the forum.  [smile]

   I take it you got the old pad off?

  I would get the medium (soft as opposed to super soft) and the hard. I use one or the other depending on the application.

Seth

Offline sospan

  • Posts: 27
Re: ro 150 FEQ sanding pads
« Reply #3 on: February 09, 2018, 01:16 PM »
I use mine for sanding a lot of wide material, so I find the hard pad works very well.  With the medium pad, I found the edge of the pads were doing most of the work.

What will compliment the sander very well, is the ergonomic hand sander, it takes your old (and damaged) sanding discs allowing you to get the most out of them.