Author Topic: Sys-MFT  (Read 5615 times)

0 Members and 1 Guest are viewing this topic.

Offline ScotF

  • Posts: 1853
Sys-MFT
« on: October 11, 2013, 09:30 PM »
Are the tops going to be made available in case you damage one and if so, any idea on cost?  Any planes to offer this in bigger  Systainer sizes?

Scot

Offline jobsworth

  • Posts: 2200
  • You Rang?
Re: Sys-MFT
« Reply #1 on: October 12, 2013, 04:11 AM »
Just checked the tops are available over here in the UK so Im guessing they are available there.
Festool "You'll Never Work Alone"

Offline Wuffles

  • Posts: 206
Re: Sys-MFT
« Reply #2 on: October 12, 2013, 04:58 AM »
Yep, bought one by accident thinking it might fit the top of my CT26...naturally it didn't, so I felt compelled to buy a Sys-MFT a week later to make up for the error. Still haven't figured out what to use the Sys-MFT for  [embarassed]
TS 75 (upgraded from a well used TS 55) // handful of rails from 800 to 3000 // C̶a̶r̶v̶e̶x̶ ̶P̶S̶ ̶4̶2̶0̶ // OF 1400 // Domino DF 500 // Metabo SXE450 (couldn't justify the Rotex) // CT26 with all the trimmings

Offline neeleman

  • Posts: 447
Re: Sys-MFT
« Reply #3 on: October 12, 2013, 05:06 AM »
The MDF Perforated top is sold separately (500077).
The special ABS lid is also available as spare part (500308).
Festoolian since 1998.
FESTOOL:
CTWings, BHC 18, Precisio CS50 EB-Set, CMS-GE, CMS-PS, CMS-OF, MFT/3, MFT/3-VL, Kapex KS120-UG Set, TS55 R EBQ, Carvex PS420 EQ, BS75 E, RAS115.04 E, Rotex RO90 DX, Rotex RO150 FEQ, DTS400 EQ, RS400 EQ, RTS400 EQ, RS300 EQ, Duplex LS130 EQ, Deltex DX93 E, ETS150/5 EQ, ETS150/3 EQ, Domino DF500 Q, OF1010 EBQ, OF1400 EBQ, OFK500 Q, MFK700 EQ, C12-Li, T15+3, TI15 Impact, T18+3, CTL26 E, CTL22 E SG, CTL Midi, EHL65 EQ, WCR1000, D27-AS Plug-it, D36 UNI-RS, FS800, FS800/2, FS1080/2, FS1400/2 (2x), FS 3000/2, Gecko Dosh, Toolie, CE-SYS-2010, RB-SYS CART, Syslite KAL, LEV1400, LEV350, SYS-MFT
PROTOOL:
PDC18-4, FLC UNI, VCP260 E-M AC, DSC-AGP230, DSG-AGP125-14 DE, DRP16 ET FF, DWC12-4000

Offline Bikeboy80

  • Posts: 463
    • Drumm Design Remodel
Re: Sys-MFT
« Reply #4 on: October 12, 2013, 06:39 AM »
Looks like you could swap the lid on to a larger sys if you so desired.
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Offline ScotF

  • Posts: 1853
Re: Sys-MFT
« Reply #5 on: October 12, 2013, 03:01 PM »
Thanks, everyone...this looks like a great addition to the MFT using a jigsaw or when you want to quickly elevate your work. 

Scot

Offline Bhend18

  • Posts: 129
    • Hendricks Construction
Re: Sys-MFT
« Reply #6 on: October 12, 2013, 10:57 PM »
Would the top connect to the hose garage on the CT?
Domino DF 500, CT 36 E, Boom Arm Set, CT MIDI, OF 1400, LR 32, FS 2424/2-LR 32, FS 1400/2 LR32, TS 55 REQ, FS 800, FS 1080, FS 1900, FS 3000, Parallel Guide Set, MFT/3, Kapex KS 120, Kapex UG, CXS, CMS-GE, Carvex PS 420 EBQ, RO 90 DX, RO 150 FEQ, RTS 400 EQ, RS 2 E, RAS 115 E

Offline Wuffles

  • Posts: 206
Re: Sys-MFT
« Reply #7 on: October 13, 2013, 03:17 AM »
No, see my post above.
TS 75 (upgraded from a well used TS 55) // handful of rails from 800 to 3000 // C̶a̶r̶v̶e̶x̶ ̶P̶S̶ ̶4̶2̶0̶ // OF 1400 // Domino DF 500 // Metabo SXE450 (couldn't justify the Rotex) // CT26 with all the trimmings

Offline joiner1970

  • Posts: 1841
Re:
« Reply #8 on: October 13, 2013, 03:51 AM »

Offline Wuffles

  • Posts: 206
Re: Sys-MFT
« Reply #9 on: October 13, 2013, 05:37 AM »
@Bhend18, I replied via phone and now realise it sounded a bit rude as I was limited to typing short words. Here's what I put in the previous post:

"Yep, bought one by accident thinking it might fit the top of my CT26...naturally it didn't, so I felt compelled to buy a Sys-MFT a week later to make up for the error. Still haven't figured out what to use the Sys-MFT for."

However, this might help - it certainly helped me as I made one and a sacrificial top on top of that for just this kind of thing:

http://festoolownersgroup.com/festool-jigs-tool-enhancements/a-place-for-my-tips-toys-and-tinkering/msg266886/#msg266886
TS 75 (upgraded from a well used TS 55) // handful of rails from 800 to 3000 // C̶a̶r̶v̶e̶x̶ ̶P̶S̶ ̶4̶2̶0̶ // OF 1400 // Domino DF 500 // Metabo SXE450 (couldn't justify the Rotex) // CT26 with all the trimmings