Woodworking & Power Tools Forum - Festool Owners Group > FESTOOL DISCUSSIONS > Festool Tools & Accessories > Systainer 1 Organizer (SYS 1 Box) w Compartments Labeling
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Systainer 1 Organizer (SYS 1 Box) w Compartments Labeling  (Read 1183 times)
0 Members and 1 Guest are viewing this topic.
johnmocha

Offline Offline

Location: UNITED STATES (US)
Member Since: Aug 2008
Posts: 22
« on: March 22, 2012, 06:08 PM »
Has anyone come up with a good way to mark the insert containers (the red, blue, yellow ones)?  I'd like to have the labels facing up when I open the lid on the systainer.  Any thoughts on adapting something to do this job without having to modify the insert containers?
Thanks!
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Alan m

Offline Offline

Location: Ireland
Member Since: Aug 2010
Posts: 2998
« Reply #1 on: March 22, 2012, 07:14 PM »
how about a labrl maker and ca glue on the labals
Logged
now
ts 55+2 1400 rails+ 1 lr32 1400 rail, domino+assortment systainer+ domiplate, ct 22 with boom arm+home made thien baffel, lr32 set, rotex 150, home made MFT,home made work center, 6 t locs for other tools, of2000 , ro 90, mft 800, trion , ls 130
wish list
of 1400, MFT 3,, even more t locs for other tools


"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
Wood_Junkie

Offline Offline

Location: Madison, Wisconsin - USA
Member Since: Dec 2009
Posts: 1304
« Reply #2 on: March 23, 2012, 11:21 AM »
Quote from: johnmocha on March 22, 2012, 06:08 PM
Has anyone come up with a good way to mark the insert containers (the red, blue, yellow ones)?  I'd like to have the labels facing up when I open the lid on the systainer.  Any thoughts on adapting something to do this job without having to modify the insert containers?
Thanks!

I cutout the label from whatever screws are in there and tape them into the interior of the box, right up near the top.
Rarely are the boxes overflowing, so the labels are pretty visible, from an angle from the front.  They are not visibile from directly overhead (i.e. if these were sitting on the floor).

I'll post pics later.
Logged
BJM9818

Offline Offline

Location: Philadelphia PA
Member Since: Feb 2011
Posts: 53
« Reply #3 on: March 24, 2012, 07:32 AM »
I have a dozen Stanley parts boxes you buy at Home Depot. They are the better ones with a clear plastic lid and removable boxes (with 2 different sizes)like Festool. I use a brother Ptouch and label the  top of every little bin on the side that faces me when I open it. 

The Festool Sys I with the inserts look great but I have way to many tools I need to buy before spending money converting them over. I'll try and post a pic later.
Logged
greenMonster

Offline Offline

Location: USA
Member Since: Aug 2011
Posts: 285
« Reply #4 on: March 24, 2012, 01:58 PM »
I'm definitely interested in everyones pictures!

Do the trays fit perfectly in the SYS1 or do they rattle around because of the ribbing?
I looked around for diy trays, but nothing seemed ideal due to the above problem...

I also was considering the dominos systainer as I think a SYS1 will be too small for my needs.
Additionally I've seen a SYS3 (?) with 3 Stanley-Like Trays which I think may be ideal, but I haven't heard diddly about. (Good Picture Comparison)

Anyone have all 3 methods?

*Also, how do you like your label maker? I go into office depot all the time, but they've got like 20 versions and I get overwhelmed and just leave  Eek!
« Last Edit: March 24, 2012, 02:08 PM by greenMonster » Logged
greenMonster

Offline Offline

Location: USA
Member Since: Aug 2011
Posts: 285
« Reply #5 on: March 24, 2012, 02:06 PM »
and to answer the OP, here's Wood_Junkies Solution
http://festoolownersgroup.com/festool-tool-reviews/review-of-festool-sys-1-box-(487552)/

OEM labels
http://t-locsystainer.com/html/accessories_2.html
« Last Edit: March 24, 2012, 02:12 PM by greenMonster » Logged
Corwin

Online Online

Location: Washington State, USA
Member Since: Jan 2007
Posts: 1994
« Reply #6 on: March 24, 2012, 03:01 PM »
Quote from: greenMonster on March 24, 2012, 01:58 PM
...
Do the trays fit perfectly in the SYS1 or do they rattle around because of the ribbing?
I looked around for diy trays, but nothing seemed ideal due to the above problem...
...


The Sys I Box comes with an insert/liner that the boxes sit in...



So, no, they do not rattle around.  They also come with a lid foam that prevents your stored items from getting mixed up.
Logged
Shirt Size:  L
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: