tjbier
 Online
Location: Grand Rapids, MI, USA Member Since: Jun 2010
Posts: 250
|
 |
« Reply #90 on: February 22, 2012, 04:41 PM » |
|
So do you guys that hate the TS55 that much also hate the TS75?
and I keep reading "easier to use off the rail", how often do you really do that?
Mafell has NO footprint around here, so for me this is not even a topic of concern. Hard enough finding guys that know/use Fessy's, let alone someone who's heard of Mafell.
I would like to try the Mafell and see what all the fuss is 'bout, but at $300 more and no dealer support it most likely will just never happen. I have the 75 and like it but someday will add a ts55 or equivalent to have a lighter saw for sheet goods, unless I have to cut 2 or 3 at a time , then the 75 shines.
|
|
|
|
|
Logged
|
Tom- ps, I read these.
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
richard.selwyn
 Offline
Location: Normandy, France Member Since: Jan 2007
Posts: 631
Normandy, France
|
|
« Reply #91 on: February 22, 2012, 04:42 PM » |
|
[quote author=jmbfestool link=topic=18505.msg193889#msg193889 date=1329942114
I have been having my eye on the Mafell LS103 for a while now! Just wish it was a little cheaper and I wouldnt of bought it with out a doubt! Just the price is making me thing twice! Especially after doing this oak porch and hoping if I get them have some more oak jobs in the pipe line later on! This tool would be mint!
JMB
[/quote]
Is it better than e Protool one?
|
|
|
|
|
Logged
|
|
|
|
richard.selwyn
Offline
Location: Normandy, France Member Since: Jan 2007
Posts: 631
Normandy, France
|
|
« Reply #92 on: February 22, 2012, 04:46 PM » |
|
So do you guys that hate the TS55 that much also hate the TS75?
and I keep reading "easier to use off the rail", how often do you really do that?
Mafell has NO footprint around here, so for me this is not even a topic of concern. Hard enough finding guys that know/use Fessy's, let alone someone who's heard of Mafell.
I would like to try the Mafell and see what all the fuss is 'bout, but at $300 more and no dealer support it most likely will just never happen. I have the 75 and like it but someday will add a ts55 or equivalent to have a lighter saw for sheet goods, unless I have to cut 2 or 3 at a time , then the 75 shines.
I don't hate either of them and use them with great satisfaction. Its just as I've got to think about repairing the base on the 55 I'd be interested if something else was better. I have the Carvex and think it is rubbish (been raired twice and still no good) so was going to buy the Mafell jigsaw but the dealer said its no better. Glad I've got a Bosch  |
|
|
|
|
Logged
|
|
|
|
windmill man
Offline
Location: Lancashire UK Member Since: Aug 2007
Posts: 544
|
|
« Reply #93 on: February 22, 2012, 04:54 PM » |
|
Richard, The scoring function does work. But if you are working with white or light coloured sheets , it does leave a line on edge to edge joints, on dark stuff or edge to face joint its not noticeable. but it is absolutely chip free. I do have a technique with the festool 55 that does something similar but cant describe it here. I'm sure you can work it out. Just don't think too deep and think the problem through backwards and forwards  John |
|
|
|
|
Logged
|
|
|
|
neth27
Offline
Location: uk Member Since: Oct 2010
Posts: 427
|
|
« Reply #94 on: February 22, 2012, 04:59 PM » |
|
Richard, The scoring function does work. But if you are working with white or light coloured sheets , it does leave a line on edge to edge joints, on dark stuff or edge to face joint its not noticeable. but it is absolutely chip free. I do have a technique with the festool 55 that does something similar but cant describe it here. I'm sure you can work it out. Just don't think too deep and think the problem through backwards and forwards John Why can't you describe pulling the saw backwards on here? John... |
|
|
|
|
Logged
|
|
|
|
Festoolfootstool
Offline
Location: uk Member Since: Mar 2010
Posts: 1528
The trouble with Bob is its all about Bob
|
|
« Reply #95 on: February 22, 2012, 05:00 PM » |
|
So do you guys that hate the TS55 that much also hate the TS75?
and I keep reading "easier to use off the rail", how often do you really do that?
Mafell has NO footprint around here, so for me this is not even a topic of concern. Hard enough finding guys that know/use Fessy's, let alone someone who's heard of Mafell.
I would like to try the Mafell and see what all the fuss is 'bout, but at $300 more and no dealer support it most likely will just never happen. I have the 75 and like it but someday will add a ts55 or equivalent to have a lighter saw for sheet goods, unless I have to cut 2 or 3 at a time , then the 75 shines.
I dont think anyone hates the ts55 I kept mine for a year after I bought the mafell I just sold it as I had not used it.and I bought a ts75 |
|
|
|
|
Logged
|
If the milk turns out to be sour, I ain't the kind of **** to drink it.......
Why do Festool accessories only have a two month guarantee here in the UK ?
|
|
|
Vindingo
Offline
Location: North Jersey Member Since: Jan 2009
Posts: 409
|
|
« Reply #96 on: February 22, 2012, 05:03 PM » |
|
I don't hate either of them and use them with great satisfaction. Its just as I've got to think about repairing the base on the 55 I'd be interested if something else was better. I have the Carvex and think it is rubbish (been raired twice and still no good) so was going to buy the Mafell jigsaw but the dealer said its no better. Glad I've got a Bosch Have you tried the hilti wsj 850-eb jigsaw? I wasn't trilled with my Fes jigsaw and thought the Hilti looked interesting, but haven't been able to see one in the flesh. |
|
|
|
|
Logged
|
|
|
|
neth27
Offline
Location: uk Member Since: Oct 2010
Posts: 427
|
|
« Reply #97 on: February 22, 2012, 05:06 PM » |
|
I have been having my eye on the Mafell LS103 for a while now! Just wish it was a little cheaper and I wouldnt of bought it with out a doubt! Just the price is making me thing twice! Especially after doing this oak porch and hoping if I get them have some more oak jobs in the pipe line later on! This tool would be mint! JMB A joinery shop i visit had 3 of them, they got them for a project they were doing with some oak. They must of had about 100 lengths of 10x6 oak in the compound.They also had some of the Mafell drills sand the portable bandsaws (they said the bandsaws were amazing) They asked me if i wanted to buy any after they had finished the project..... A bit out of my price range, and i would never use them John...... |
|
|
|
|
Logged
|
|
|
|
neth27
Offline
Location: uk Member Since: Oct 2010
Posts: 427
|
|
« Reply #98 on: February 22, 2012, 05:10 PM » |
|
I don't hate either of them and use them with great satisfaction. Its just as I've got to think about repairing the base on the 55 I'd be interested if something else was better. I have the Carvex and think it is rubbish (been raired twice and still no good) so was going to buy the Mafell jigsaw but the dealer said its no better. Glad I've got a Bosch Have you tried the hilti wsj 850-eb jigsaw? I wasn't trilled with my Fes jigsaw and thought the Hilti looked interesting, but haven't been able to see one in the flesh. I had the Hilti wsj 850 jigsaw, great saw, cut through anything.... But i wanted cordless... Got the cordless carvex and I'm not very impressed upto now.. john... |
|
|
|
|
Logged
|
|
|
|
jmbfestool
Offline
Location: UK Member Since: Jan 2009
Posts: 5204
|
|
« Reply #99 on: February 22, 2012, 05:56 PM » |
|
[quote author=jmbfestool link=topic=18505.msg193889#msg193889 date=1329942114
I have been having my eye on the Mafell LS103 for a while now! Just wish it was a little cheaper and I wouldnt of bought it with out a doubt! Just the price is making me thing twice! Especially after doing this oak porch and hoping if I get them have some more oak jobs in the pipe line later on! This tool would be mint!
JMB
Is it better than e Protool one? [/quote] I dont really know ill check it out! I think the Mafel has more accessories! The thing is each accessory for the LS103 is about £4000 so the tool could end up costing you £15 000 so not really a cheap option! |
|
|
|
|
Logged
|
|
|
|
edh/chippy
Offline
Location: UK Member Since: Feb 2012
Posts: 2
|
|
« Reply #100 on: February 22, 2012, 06:26 PM » |
|
It has more power, and the splinter guard strips don't fall off the track.
John...
Both good points, the TS55 is definitely under powered especially for ripping any hardwood timber thicker than a fag paper. I am about to replace my first splinter guard in the next few days and I have to be honest I'm not looking forward to it having read a few posts on here. |
|
|
|
|
Logged
|
|
|
|
edh/chippy
Offline
Location: UK Member Since: Feb 2012
Posts: 2
|
|
« Reply #101 on: February 22, 2012, 07:12 PM » |
|
Hello! This is my first post on FOG. Andy 5404 said the TS55 was under powered when ripping. I thought so to, till I fitted a rip blade. No burning, or cutting out through overheating. The problem I have now, is on soft wood. The wast comes off as long thin ribbon's. They don't extract very well and eventually clog the inside of the saw.
As for the splinter guard, I brought one a couple of weeks ago but haven't fitted it. Removing the old one in one piece was OK. I left the original double sided tape on, put a new length of tape on. And put the old splinter guard back on sitting out a couple of mm. Put the rail on a scrap board, run the saw down it, as good as new. The saw's about four years old. It hasn't done a million miles yet, but it gets plenty of work.
If I lost it tomorrow I'd definitely buy the same again.
|
|
|
|
|
Logged
|
|
|
|
plouf
Offline
Location: Belgium Member Since: Nov 2011
Posts: 38
|
|
« Reply #102 on: February 22, 2012, 07:22 PM » |
|
Hi, Something that doesn't really make sense for me, apart of the lack of higher profile for Mafell (which has been noticed several times up here) is why they don't go the "system way" that has been so successful for Festool. They have the plunge saw, the routers, the vac's, just to mention a few. Would they take advantage of their excellent tools in a system, they could hit a spot. But for now, it looks that take another road. Strange for me. Part of the feeling I got that they may probably miss an opportunity, there, is that the very first tool I bought for my "festool system" was... the MT55cc  I'm fairly new to woodworking and after lots of readings for a comparison between the available plunge saws, i went for the Mafell, with no regret. It was ten months ago. But very soon, I needed to complete the system: I then bought a MFT/3, then two festool routers, the MFS and hopefully, more to come. And the Mt55 is part of it. Works perfectly with the festool guide rail (even the lateral adjustments are effective). But such a shame that the cool features of the thinner 160cm Mafell rail are not available on the festool ones. Same for the second track that JMB mentionned earlier. Wonder what would happen if Mafell went the "system way" as well. A healthy rivalry in features not only in the tools but in the system itself would certainly sparks new innovative heights in the Festool labs. Which would certainly please lots of us form the FOG lol. - plouf - |
|
|
|
|
Logged
|
|
|
|
GhostFist
Offline
Location: Canada Member Since: Oct 2010
Posts: 1072
|
|
« Reply #103 on: February 22, 2012, 07:32 PM » |
|
mafell routers plunge saws and jigsaws work with Mafell rails and dust collectors just like festool. I feel festool routers are better but I don't know to much about mafell routers. the MT55 will work with festool rails as well, and of course dust collectors
|
|
|
|
|
Logged
|
|
|
|
Kev
Online
Location: Australia Member Since: Nov 2011
Posts: 2443
|
|
« Reply #104 on: February 22, 2012, 07:57 PM » |
|
It'd be a giggle if Festool acquired Maffell Mafool  |
|
|
|
|
Logged
|
|
|
|
EWTHeckman
Offline
Location: USA Member Since: Aug 2011
Posts: 288
|
|
« Reply #105 on: February 22, 2012, 08:18 PM » |
|
edh/chippy,  to the FOG! |
|
|
|
|
Logged
|
Ed "What the" Heckman
|
|
|
Nigel
Offline
Location: France Member Since: Apr 2009
Posts: 563
|
|
« Reply #106 on: February 23, 2012, 02:09 AM » |
|
It'd be a giggle if Festool acquired Maffell Mafool Well, they are already very friendly.Festool makes their little router and Mafell used to make the old OF2000 - I think. |
|
|
|
|
Logged
|
|
|
|
hobbes
Offline
Location: So Cal, USA Member Since: May 2009
Posts: 106
Work smart, play hard.
|
|
« Reply #107 on: February 26, 2012, 11:55 AM » |
|
Is the release in US a long way off? IF it's just a few months, I'd wait for it (why not, any improvement is still an improvement for roughly the same cost as what the price will be next month) but it's it's much longer than I don't think I want to wait since I've started to buy into the system and that's a pretty basic component for the core set.
|
|
|
|
|
Logged
|
|
|
|
hockey_magnet
Offline
Location: Canada Member Since: Nov 2011
Posts: 305
|
|
« Reply #108 on: February 26, 2012, 12:34 PM » |
|
Is the release in US a long way off? IF it's just a few months, I'd wait for it (why not, any improvement is still an improvement for roughly the same cost as what the price will be next month) but it's it's much longer than I don't think I want to wait since I've started to buy into the system and that's a pretty basic component for the core set.
I had the same question - was going to wait but figured it might be quite a while and I needed it now (of course). But I'm still interested in a date for realease |
|
|
|
|
Logged
|
|
|
|
Brice Burrell
Offline
Location: Pittsburgh, PA, USA Member Since: Mar 2007
Posts: 6206
Remodeling Contractor
|
|
« Reply #109 on: February 26, 2012, 01:22 PM » |
|
Is the release in US a long way off? IF it's just a few months, I'd wait for it (why not, any improvement is still an improvement for roughly the same cost as what the price will be next month) but it's it's much longer than I don't think I want to wait since I've started to buy into the system and that's a pretty basic component for the core set.
I had the same question - was going to wait but figured it might be quite a while and I needed it now (of course). But I'm still interested in a date for realease You never know how Festool will get new tools to N. America. There was a long delay to get the CT26/36, Planex and we still don't have the Carvex. |
|
|
|
|
Logged
|
|
|
|
hockey_magnet
Offline
Location: Canada Member Since: Nov 2011
Posts: 305
|
|
« Reply #110 on: February 26, 2012, 02:45 PM » |
|
Is the release in US a long way off? IF it's just a few months, I'd wait for it (why not, any improvement is still an improvement for roughly the same cost as what the price will be next month) but it's it's much longer than I don't think I want to wait since I've started to buy into the system and that's a pretty basic component for the core set.
I had the same question - was going to wait but figured it might be quite a while and I needed it now (of course). But I'm still interested in a date for realease You never know how Festool will get new tools to N. America. There was a long delay to get the CT26/36, Planex and we still don't have the Carvex. You'd have to think though that the R will flat out replace the current model since they are almost identical and it wouldn't make sense to have to such similar products in production, |
|
|
|
|
Logged
|
|
|
|
hobbes
Offline
Location: So Cal, USA Member Since: May 2009
Posts: 106
Work smart, play hard.
|
|
« Reply #111 on: February 26, 2012, 11:18 PM » |
|
Is the release in US a long way off? IF it's just a few months, I'd wait for it (why not, any improvement is still an improvement for roughly the same cost as what the price will be next month) but it's it's much longer than I don't think I want to wait since I've started to buy into the system and that's a pretty basic component for the core set.
I had the same question - was going to wait but figured it might be quite a while and I needed it now (of course). But I'm still interested in a date for realease You never know how Festool will get new tools to N. America. There was a long delay to get the CT26/36, Planex and we still don't have the Carvex. You'd have to think though that the R will flat out replace the current model since they are almost identical and it wouldn't make sense to have to such similar products in production, Given what OP said may be the price in Euro that loosely translates to the current price (plus March markup). If it's in April timeframe, it'd be worth the wait, but with my luck I'll buy and 2 months later it'll get released. So there's no set time internal between Europe release vs. US release huh? Carvex was delayed for quality reasons so that may be an unexpected scenario. |
|
|
|
« Last Edit: February 27, 2012, 03:08 AM by hobbes »
|
Logged
|
|
|
|
andy5405
Offline
Location: Sussex, England Member Since: May 2011
Posts: 196
|
|
« Reply #112 on: February 27, 2012, 03:11 AM » |
|
I mentioned that I was advising the guy I work with on plunge saws. He has used all my Festool gear and loves it including the TS. I sent him a link to this thread and his current view is the best combination would be Festool rails (plus accessories in time to build a system) with the Mafell saw. I can't say that he would be making a bad choice and my only serious reservation would be the lack of a plug-it cord on the Mafell. I have enough fun stopping an integrated hose and power lead from catching in all the wrong places. (for integrated read insulation tape used to fix power lead to hose) It would always be possible to convert the Mafell using the Plug-it conversion kit ( Festool part no: 491144 ) but that would probably invalidate the warranty. It could also be possible to find out if Mafell would carry out the conversion themselves and still maintain the warranty. If they could do the above my two remaining reservations would be the lack of riving knife (could someone explain the implications of that one?) and in the UK Festool's free tool insurance counts for a lot. Festool - new tool in the event of theft I still think Festool will be fine despite many learned FOG members believing that Festool got it seriously wrong with the upgrade. However they are not always that bright, they did design a rail saw with a scale that doesn't work with the rail. |
|
|
|
|
Logged
|
|
|
|
jmbfestool
Offline
Location: UK Member Since: Jan 2009
Posts: 5204
|
|
« Reply #113 on: February 27, 2012, 03:26 AM » |
|
I mentioned that I was advising the guy I work with on plunge saws. He has used all my Festool gear and loves it including the TS. I sent him a link to this thread and his current view is the best combination would be Festool rails (plus accessories in time to build a system) with the Mafell saw. I can't say that he would be making a bad choice and my only serious reservation would be the lack of a plug-it cord on the Mafell. I have enough fun stopping an integrated hose and power lead from catching in all the wrong places. (for integrated read insulation tape used to fix power lead to hose) It would always be possible to convert the Mafell using the Plug-it conversion kit ( Festool part no: 491144 ) but that would probably invalidate the warranty. It could also be possible to find out if Mafell would carry out the conversion themselves and still maintain the warranty. If they could do the above my two remaining reservations would be the lack of riving knife (could someone explain the implications of that one?) and in the UK Festool's free tool insurance counts for a lot. Festool - new tool in the event of theft I still think Festool will be fine despite many learned FOG members believing that Festool got it seriously wrong with the upgrade. However they are not always that bright, they did design a rail saw with a scale that doesn't work with the rail. Yeah the warranty thing keeps festool ontop of the game especially the stolen for new! The riving knife has been discussed in a separate topic! Mafel have done certain things to the saw so it does not need a riving knife and is still safe use. Jmb |
|
|
|
|
Logged
|
|
|
|
Peter Parfitt
Magazine/Blog Author
Offline
Location: England Member Since: Apr 2011
Posts: 964
|
|
« Reply #114 on: February 27, 2012, 03:44 AM » |
|
Dear JMB
The riving knife is an essential feature of this type of saw - not just for safety but for stability along the cut, prevention of binding (as the wood twists) and accuracy. Anyone who uses a table saw without one is either nuts or has a desire to meet their maker sooner than they should.
A riving knife is particularly important with a thin kerf blade.
Peter
|
|
|
|
|
Logged
|
Kapex 120, OF 2200, OF1400, TS55, TS55R, CMS-TS55R, PSC420, Domino 500, MFT3, Rotex 90, Rotex 150, CTL26, 1400 & 2700 Guide Rails and a lovely watch
Wish List: C15, HL850, BS75, DF700, Second Extractor, new secretary
|
|
|
Brice Burrell
Offline
Location: Pittsburgh, PA, USA Member Since: Mar 2007
Posts: 6206
Remodeling Contractor
|
|
« Reply #115 on: February 27, 2012, 08:46 AM » |
|
Given what OP said may be the price in Euro that loosely translates to the current price (plus March markup). If it's in April timeframe, it'd be worth the wait, but with my luck I'll buy and 2 months later it'll get released. So there's no set time internal between Europe release vs. US release huh? Carvex was delayed for quality reasons so that may be an unexpected scenario.
There are any number of factors that go into the decision of when to release a new tool here. They seem to satisfy demand over (and the rest of the world) before they change over to make our 120v version of the tool. Of course when there's a new model inventory levels of the current model plays a role. If Festool USA is sitting a large stock pile of TS55 saws it might be awhile before we get the new one. The track record is about a year for us to get the new tools. There have been the (very) rare exceptions, like the OF2200 router and the CT48 vac, where we've gotten the news right away. However, I'd very surprised if we see the TS55R any sooner than this fall at the earliest. |
|
|
|
|
Logged
|
|
|
|
windmill man
Offline
Location: Lancashire UK Member Since: Aug 2007
Posts: 544
|
|
« Reply #116 on: February 27, 2012, 09:01 AM » |
|
Its not a new saw! Its just a make over.  Information will be released on March 1st , you will see what I mean then. I to believed that a riving knife was an essential but I no long know if this is the case after Maffell`s statement in the other post.  |
|
|
|
|
Logged
|
|
|
|
Ken Nagrod
Restricted
Offline
Location: New Jersey Member Since: Jul 2010
Posts: 3438
|
|
« Reply #117 on: February 27, 2012, 09:12 AM » |
|
Didn't they increase the rpm's by 1? Hopefully for Festool's sake, nobody takes the 'R' in the name as "Reconditioned". |
|
|
|
|
Logged
|
|
|
|
jmbfestool
Offline
Location: UK Member Since: Jan 2009
Posts: 5204
|
|
« Reply #118 on: February 27, 2012, 09:30 AM » |
|
Dear JMB
The riving knife is an essential feature of this type of saw - not just for safety but for stability along the cut, prevention of binding (as the wood twists) and accuracy. Anyone who uses a table saw without one is either nuts or has a desire to meet their maker sooner than they should.
A riving knife is particularly important with a thin kerf blade.
Peter
I did reply to your post but removed it due to the likelihood of my post either being deleted, thread being locked or going way of topic. This will then result in Guy Ashley throwing a mardy.  JMB |
|
|
|
|
Logged
|
|
|
|
windmill man
Offline
Location: Lancashire UK Member Since: Aug 2007
Posts: 544
|
|
« Reply #119 on: February 27, 2012, 09:44 AM » |
|
Peter.
See thread
Festool tools and Accessories who needs a riving knife, some where in the thread is a Statement from mafell regarding the lack of riving knife on MT55. After reading this I am now uncertain about the necessity of the knife after a life time of certainty
John
Every one please note this statement refers to the MT55 ONLY!!!
|
|
|
|
« Last Edit: February 27, 2012, 10:26 AM by windmill man »
|
Logged
|
|
|
|
|
