« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Using a FESTOOL router With trend hinge jig  (Read 17821 times)

0 Members and 1 Guest are viewing this topic.

Offline Tinker

  • Posts: 3655
Re: Using a FESTOOL router With trend hinge jig
« Reply #30 on: September 28, 2012, 08:18 AM »
Quote from: Deansocial on September 28, 2012, 02:26 AM
Quote from: neth27 on September 27, 2012, 03:13 PM
the US adaptor plate then one of these http://www.trend-uk.com/en/UK/product/GB_US_160/4/203/guide_bush_usa_16mm_hinge_jig_.html

John.....

Thats how i do it. Well to be honest i normally use my chisels because they are faster fora few doors

Any time i have ever done hinge mortices, it is for no more than a very few.  Usually to hang one or two doors.  I just do it the way i learned many moons ago when i was a teenager.  Marking guage, hammer and chisel.  That is quicker than setting up the router.

When using the router, i find more tendency for erroer than the chisel method.  But, that's me
Tinker
Tinker
Logged
Wayne H. Tinker
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Alan m

  • Posts: 3303
Re: Using a FESTOOL router With trend hinge jig
« Reply #31 on: September 28, 2012, 05:57 PM »
i wonder if you could machine down the 17mm  bush
Logged
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)

Offline galwaydude18

  • Posts: 842
Re: Using a FESTOOL router With trend hinge jig
« Reply #32 on: September 28, 2012, 05:59 PM »
I have the full length trend hinge jig. I use my of 1010 with the pc guide bush adaptor and trend also do a 16mm oc guide bush and have no issues with that setup at all.
Logged

Offline neth27

  • Posts: 566
Re: Using a FESTOOL router With trend hinge jig
« Reply #33 on: September 28, 2012, 06:07 PM »
I use the Trend hinge jig with a OF1400  when I'm hanging a fair few fire doors (usually in schools). In peoples houses when just using 3" butts i just use a hammer and chisel..

john
Logged

Offline demographic

  • Posts: 374
Re: Using a FESTOOL router With trend hinge jig
« Reply #34 on: March 19, 2018, 02:47 PM »
I use the long Trend hinge jig if I'm fitting loads of doors or its not many generally just chisel them out.
Sometimes I do a combination and mark out with a knife chisel the top and bottom of the hinge mortise and rout it out freehand.
It all depends on what tools are furthest away or how many doors I have to do.
Logged

Offline The Wood Butcher

  • Posts: 10
Re: Using a FESTOOL router With trend hinge jig
« Reply #35 on: March 24, 2018, 02:15 PM »
What I use for the same purpose:

Leigh adaptor: Leigh adaptor at Axminster

Axminster bushing kit (includes 16mm): Axminster Metric bushing kit

Edit: Just saw this is for an antique thread dredged up from the grave, anyhoo my advice stands.
« Last Edit: March 24, 2018, 02:20 PM by The Wood Butcher »
Logged

Offline Job and Knock

  • Posts: 117
Re: Using a FESTOOL router With trend hinge jig
« Reply #36 on: April 15, 2018, 09:07 AM »
When I was using an OF1000 for this purpose I found that a standard Festool 17mm guide bush used with a 13mm straight cutter worked as well as a 16mm Trend GB and their 12mm cutter. For rounded corner hinges (which are often 10mm radius) I used a 24mm GB with a 20mm diameter cutter
Logged
Simplicity is the embodiment of purity and unity
- Shaker Maxims
Pages: 1 [2]  All   Go Up
« previous next »