« previous next »
Pages: 1 ... 30 31 32 33 34 35 36 37 38 39 [40]  All   Go Down

Author Topic: What Festool Did You buy Today?  (Read 276946 times)

0 Members and 1 Guest are viewing this topic.

Offline niky1

  • Posts: 13
Re: What Festool Did You buy Today?
« Reply #1170 on: September 13, 2017, 01:51 PM »
CMS-TS 55 R Set
Dust extraction set CS 70 AB
Adjustable stop WA-AR
Extension table VL
Extension table VB-CMS
Stopper LA-CS 50/CMS
Saw blade holder SGA
Panther saw blade 160x2,2x20 PW12

Script cutter HW shank 8 mm HW S8 D11/60°

Uff, uff, uff .... [doh]
Logged
TS 55 EBQ, 2 x FS 1400/2, FS 800/2, PS 420 EBQ - Plus,  OF 1010 EBQ - Set + accessories, CXS Li 1,3 - Set, CXS Li 2,6 - 90 Limited Edition, DF 500 Q-Set + SORT-SYS DOMINO, set  ZOBO system, SYS 1 CE-SORT, PDC 18/4 Li 5,2 Set, SURFIX SYS3-SET, RTS 400 REQ-Plus + SYS-STF 80x133 + HSK-A 80x130, MFT 3 + SYS-MFT fixing set + FSZ 120, FSZ 300 + Veritas Parf Dogs, CMS-TS 55 R Set + all accessories.........
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Holmz

  • Posts: 3915
Re: What Festool Did You buy Today?
« Reply #1171 on: September 16, 2017, 06:09 AM »
Quote from: Holmz on September 09, 2017, 08:06 AM
... I got a new (used) Festool sander on the way.

Well the used sander arrived... Mrs asked what is THAT!



So that goes with the other used sander (DX93).
And the red 1/2 sheet sander, and the yellow 5"/6" random orbital.
Basically... "I shall not want" for more sanders. This really rounds out the stable. (Belt, corner, random-orbital and 1/2-sheet)

It looks like it has more frequent flier miles than average, as I removed the Yankee 220v male plug!
(I will put the Yankee plug onto a Nuetrik to go with the Au and Eu/Schumko for world-wide readiness.)
And then I tested it.
No odours, and the belt moved.

The only thing remaining is the frame, and some supply of the belts. Probably in the 240-600 range for veneer... But a few course ones for agro-work would be good to have on hand.
Logged

Offline rdr

  • Posts: 68
Re: What Festool Did You buy Today?
« Reply #1172 on: September 20, 2017, 12:08 PM »
Well technically I didn't make the purchase but its my money, got home from a few days away with work and SWMBO just casually said "oh I ordered you that saw thingy you were looking at its in the garage - welcome home"

low and behold a Kapex 120 was sat waiting for me in the garage  [smile]




She's a keeper  [smile] (SWMBO I mean well and the saw I suppose  [smile])
Logged

Offline VW MICK

  • Posts: 843
Re: What Festool Did You buy Today?
« Reply #1173 on: September 20, 2017, 01:15 PM »
Cool

Looks like you have a space ready for it too

Mick
Logged

Offline rst

  • Posts: 1538
Re: What Festool Did You buy Today?
« Reply #1174 on: September 20, 2017, 06:32 PM »
Just received PDC 18/4.  Used off Ebay $385.00, came in 90 Anniversary systainer, 90% angle attachment was only thing that looked used, charger was still wrapped in plastic, both batteries charged up.  Ordered the eccentric chuck...now going to give my son-in-law my Milwaukee 18v hammerdrill and older impact driver...he's not getting my new Milwaukee 18v hydraulic impact.   [cool]
Logged

Offline rdr

  • Posts: 68
Re: What Festool Did You buy Today?
« Reply #1175 on: September 21, 2017, 08:31 AM »
Quote from: VW MICK on September 20, 2017, 01:15 PM
Cool

Looks like you have a space ready for it too

Mick

Yep handy that, the saw fits lovely and just slotted straight into the MFT holes that happen to be there too  [smile]



Logged

Offline jobsworth

  • Posts: 4443
  • Burger Babe Says: I Even Buy Green Bananas
Re: What Festool Did You buy Today?
« Reply #1176 on: September 25, 2017, 06:57 PM »
I bought 3 of these puppies

Logged
Loving the Calif sun....

Offline Goz

  • Posts: 76
Re: What Festool Did You buy Today?
« Reply #1177 on: October 01, 2017, 09:50 PM »
I bought 6 used classic Systainers. Two each of SYS1, SYS2, and SYS3.  They aren't pretty, but they were cheap! Going to take a shot at organizing my non-Festool tools.

Sent from my SM-G930R4 using Tapatalk

Logged

Offline rst

  • Posts: 1538
Re: What Festool Did You buy Today?
« Reply #1178 on: October 02, 2017, 09:39 AM »
Used Planex and CT36 AC off Ebay...seller included a ton of sandpaper, bags, and vest attachment.  $1500  [big grin]  Both daughters have extensive drywall projects coming up.  I've been using vac attached pole and hand sanders for years...this seems like a more efficient solution.
Logged

Offline VW MICK

  • Posts: 843
Re: What Festool Did You buy Today?
« Reply #1179 on: October 03, 2017, 02:07 PM »
Quote from: jobsworth on November 30, 2014, 12:56 AM
Im not sure if this is the right folder for this. Ive seen this sort of thread in other forums ad thought it would be cool to do here and see if you guys think the same.

I just bought a replacement hose garage for my CT 26 and a Long life bag for it.  I got tired of messing around trying to empty the regular bags in the middle of a project. The hose garage, wel lets say I had a ooopps see and cracked.it. Tried to repair it but it didnt work.  So I bought a new one.


Hi @jobsworth
Can you believe how long this post has gone on

I do still click on it everytime I see it

Good work

Mick
Logged

Offline VW MICK

  • Posts: 843
Re: What Festool Did You buy Today?
« Reply #1180 on: October 03, 2017, 02:09 PM »
1179 replys I think

Mick
Logged

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3714
    • New Brit Workshop on YouTube
Re: What Festool Did You buy Today?
« Reply #1181 on: October 03, 2017, 03:46 PM »
Quote from: VW MICK on October 03, 2017, 02:09 PM
1179 replys I think

Mick
No - 1180 because of your post !

Peter
Logged

Offline smirak

  • Posts: 33
Re: What Festool Did You buy Today?
« Reply #1182 on: October 03, 2017, 04:03 PM »
Technically it was yesterday, but I snagged the Pro5 from the classified section yesterday...
Logged

Offline montyss

  • Posts: 20
Re: What Festool Did You buy Today?
« Reply #1183 on: October 05, 2017, 08:13 PM »
Got a used fs3000 rail today ,best part is it never had a saw down it  :)
Logged
Pages: 1 ... 30 31 32 33 34 35 36 37 38 39 [40]  All   Go Up
« previous next »