Author Topic: What Festool Did You buy Today?  (Read 395172 times)

0 Members and 1 Guest are viewing this topic.

Offline Gregor

  • Posts: 1021
Re: What Festool Did You buy Today?
« Reply #1260 on: April 05, 2018, 05:29 PM »
Ordered the D8 connector kit, some Sortainers and related small stuff (boxes), another two months rent worth up in green [blink]

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline leakyroof

  • Posts: 2198
Re: What Festool Did You buy Today?
« Reply #1261 on: April 05, 2018, 06:05 PM »
MX 1200 Mixer, 2 blades for it and 1 each of the new AS Flexible Hoses, 27mm and 36mm
Not as many Sanders as PA Floor guy.....

Offline Coen

  • Posts: 365
Re: What Festool Did You buy Today?
« Reply #1262 on: April 05, 2018, 06:50 PM »
Ordered the D8 connector kit, some Sortainers and related small stuff (boxes), another two months rent worth up in green [blink]

That just means rent is low in Germany.

Offline Gregor

  • Posts: 1021
Re: What Festool Did You buy Today?
« Reply #1263 on: April 06, 2018, 11:32 AM »
Ordered the D8 connector kit, some Sortainers and related small stuff (boxes), another two months rent worth up in green [blink]
That just means rent is low in Germany.
Or the 'some' part might have been a slight understatement [embarassed]

Or a combination of both.

Offline Mike S

  • Posts: 32
Re: What Festool Did You buy Today?
« Reply #1264 on: April 06, 2018, 03:15 PM »
I might need to unsubscribe from the Recon site. 

Ordered an LS130 today.  As of now, I have "all" of the sanders.  darn me for being a "collector".

ETS-EC 150, RTS400, and the RS2 came from Recon, and the RO 150 was bought used, and the DTS400 was bought new. 

Dammitall.  :-D

Offline Coen

  • Posts: 365
Re: What Festool Did You buy Today?
« Reply #1265 on: April 06, 2018, 03:18 PM »
I might need to unsubscribe from the Recon site. 

Ordered an LS130 today.  As of now, I have "all" of the sanders.  darn me for being a "collector".

ETS-EC 150, RTS400, and the RS2 came from Recon, and the RO 150 was bought used, and the DTS400 was bought new. 

Dammitall.  :-D

What? No BS75 or BS105?

Offline live4ever

  • Posts: 790
Re: What Festool Did You buy Today?
« Reply #1266 on: April 06, 2018, 03:32 PM »
I might need to unsubscribe from the Recon site. 

Ordered an LS130 today.  As of now, I have "all" of the sanders.  darn me for being a "collector".

ETS-EC 150, RTS400, and the RS2 came from Recon, and the RO 150 was bought used, and the DTS400 was bought new. 

Dammitall.  :-D

That's certainly not "all" of the sanders.  No RAS?  It could be argued the RO90 is kind of its own thing too...
Current systainer to productivity ratio:  very high

Offline Cheese

  • Posts: 5069
Re: What Festool Did You buy Today?
« Reply #1267 on: April 06, 2018, 05:34 PM »
As of now, I have "all" of the sanders.
:-D

Whoa not so fast...that RO 90 and the DX 93 both have your name on them...
« Last Edit: April 06, 2018, 05:38 PM by Cheese »

Offline leakyroof

  • Posts: 2198
Re: What Festool Did You buy Today?
« Reply #1268 on: April 06, 2018, 06:51 PM »
I might need to unsubscribe from the Recon site. 

Ordered an LS130 today.  As of now, I have "all" of the sanders.  darn me for being a "collector".

ETS-EC 150, RTS400, and the RS2 came from Recon, and the RO 150 was bought used, and the DTS400 was bought new. 

Dammitall.  :-D

What? No BS75 or BS105?
.  Festool not ‘bringeth’ them into the US, so we not ‘owneth’ them..... [wink]
Not as many Sanders as PA Floor guy.....

Offline Mike S

  • Posts: 32
Re: What Festool Did You buy Today?
« Reply #1269 on: April 06, 2018, 09:27 PM »
I might need to unsubscribe from the Recon site. 

Ordered an LS130 today.  As of now, I have "all" of the sanders.  darn me for being a "collector".

ETS-EC 150, RTS400, and the RS2 came from Recon, and the RO 150 was bought used, and the DTS400 was bought new. 

Dammitall.  :-D

What? No BS75 or BS105?


NAINA.

Offline Mike S

  • Posts: 32
Re: What Festool Did You buy Today?
« Reply #1270 on: April 06, 2018, 09:29 PM »
I might need to unsubscribe from the Recon site. 

Ordered an LS130 today.  As of now, I have "all" of the sanders.  darn me for being a "collector".

ETS-EC 150, RTS400, and the RS2 came from Recon, and the RO 150 was bought used, and the DTS400 was bought new. 

Dammitall.  :-D

That's certainly not "all" of the sanders.  No RAS?  It could be argued the RO90 is kind of its own thing too...

Zero interest in the RAS.  I grinders I can wreck things with.   

Not sure I have a use case for the RO90.  Now if I find one used at a reasonable price , however .......

Offline Mike S

  • Posts: 32
Re: What Festool Did You buy Today?
« Reply #1271 on: April 06, 2018, 09:32 PM »
As of now, I have "all" of the sanders.
:-D

Whoa not so fast...that RO 90 and the DX 93 both have your name on them...

See above on the RO90, and the DX93 is a withdrawn product, no?   I also have three other machines that fit the delta shaped detail sander. 

If I see either for sale used and cheap.... I will consider it. 

Offline rmhinden

  • Posts: 75
Re: What Festool Did You buy Today?
« Reply #1272 on: April 06, 2018, 11:50 PM »
I picked up a Domino 700 XL and the Systainer set of 8 and 10 mm dominos.  I have the Seneca Woodworking Small Mortise Kit on order, as well as bits and dominos for the 4 and 5mm sizes.

I decided that this combination will allow for a wide range of dominos, and I like the features and ergonomics of the XL more than the 500.  It is heaver, but the way the handles are arranged, I don't think that will be an issue.

I hope I am right :-)

Bob

Offline Gregor

  • Posts: 1021
Re: What Festool Did You buy Today?
« Reply #1273 on: April 07, 2018, 03:42 AM »
I picked up a Domino 700 XL and the Systainer set of 8 and 10 mm dominos.  I have the Seneca Woodworking Small Mortise Kit on order, as well as bits and dominos for the 4 and 5mm sizes.

I decided that this combination will allow for a wide range of dominos, and I like the features and ergonomics of the XL more than the 500.  It is heaver, but the way the handles are arranged, I don't think that will be an issue.

I hope I am right :-)
700XL + seneca works for infrequent use on small stuff, should I get the demand to do it on a more regular basis I would get me a 500.

Offline SoonerFan

  • Posts: 409
Re: What Festool Did You buy Today?
« Reply #1274 on: April 07, 2018, 09:53 AM »
As my projects have changed I decided my faithful TS55 did not handle everything I was doing well and with ease.  So I ordered a TS75.  It should arrive in a few days. 

Offline Grakat

  • Posts: 232
Re: What Festool Did You buy Today?
« Reply #1275 on: April 09, 2018, 10:39 PM »
Finally got the RO150. I was waiting for the local promotion before getting it. The discount is not much, but with Festool every dollar counts.

Picked up the abrasives systainer as well. Swallowed up the savings lol.
Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55, RO150

Offline rst

  • Posts: 2011
Re: What Festool Did You buy Today?
« Reply #1276 on: April 10, 2018, 07:18 AM »
Couldn't resist, bought the Domino connector set and the Bluetooth remote...actually need the remote for my AC 36.  Still resisting that new 36mm 7m hose.  On the bright side, I got another free hat from Toolnut.   [cool]

Offline simonh

  • Posts: 20
Re: What Festool Did You buy Today?
« Reply #1277 on: April 10, 2018, 10:13 AM »
Not Festool but I bought:

Precision dogs parallel guide
TSO GRS-16PE rail square

Getting ready for a big project with some sheet goods.
« Last Edit: April 10, 2018, 10:17 AM by simonh »

Offline scary

  • Posts: 27
Re: What Festool Did You buy Today?
« Reply #1278 on: April 10, 2018, 11:31 AM »
The surface light.That thing is awesome.

Offline JimB1

  • Posts: 163
Re: What Festool Did You buy Today?
« Reply #1279 on: April 10, 2018, 12:53 PM »
CXS Set, waiting for it to come in the mail :)
-Jim
TS55 REQ, MFT/3, OF 1010, RO 150, ETS 150/3, RTS-400, rectangle sanding block, Pocket StickFix Sanding Block and a CT Midi...

Offline ijhursh

  • Posts: 5
Re: What Festool Did You buy Today?
« Reply #1280 on: April 23, 2018, 07:07 PM »
I scored a Sys-mft-fx today!! :)


Sent from my iPhone using Tapatalk

Old stock? Used? Auction? I see some going for $400(+), lol.
It was in a store, got it for the regular price, old stock!!


Sent from my iPad using Tapatalk

Offline ColossusX

  • Posts: 123
Re: What Festool Did You buy Today?
« Reply #1281 on: April 26, 2018, 12:05 PM »
Just bought a SYS-MFT on Ebay.  Saved 15% with the app.  Can't wait to try it out

Offline jobsworth

  • Posts: 5271
  • Does Anyone Know What Time It Is?
Re: What Festool Did You buy Today?
« Reply #1282 on: April 26, 2018, 12:08 PM »
You'll like it. If youd like , have a look at Peter Parfits video on Systainer storage. He has some good ideas for using the Sys MFT

Offline justaguy

  • Posts: 188
Re: What Festool Did You buy Today?
« Reply #1283 on: April 26, 2018, 02:28 PM »
I bought a used Kapex.

I had used a Kapex at a friends shop and found a lot to like about the saw. I had been holding back on buying a new one based on the reported motor issues. I ran across a used unit in what appears to be good working condition and at the price I could not say no.

I'll check out the alignment tonight and mount a new blade. Fingers crossed..

Offline niky1

  • Posts: 16
Re: What Festool Did You buy Today?
« Reply #1284 on: April 26, 2018, 03:17 PM »
DOMINO connector range KV-SYS D8 [eek] .....
TS 55 EBQ, 2 x FS 1400/2, FS 800/2, PS 420 EBQ - Plus,  OF 1010 EBQ - Set + accessories, CXS Li 1,3 - Set, CXS Li 2,6 - 90 Limited Edition, DF 500 Q-Set + SORT-SYS DOMINO, set  ZOBO system, SYS 1 CE-SORT, PDC 18/4 Li 5,2 Set, SURFIX SYS3-SET, RTS 400 REQ-Plus + SYS-STF 80x133 + HSK-A 80x130, MFT 3 + SYS-MFT fixing set + FSZ 120, FSZ 300 + Veritas Parf Dogs, CMS-TS 55 R Set + all accessories, DOMINO  KV-SYS D8, KS 120 UG-Set KAPEX + all accessories.........

Offline niky1

  • Posts: 16
Re: What Festool Did You buy Today?
« Reply #1285 on: April 27, 2018, 09:52 AM »
Pin Festool (204147) ..... uff



TS 55 EBQ, 2 x FS 1400/2, FS 800/2, PS 420 EBQ - Plus,  OF 1010 EBQ - Set + accessories, CXS Li 1,3 - Set, CXS Li 2,6 - 90 Limited Edition, DF 500 Q-Set + SORT-SYS DOMINO, set  ZOBO system, SYS 1 CE-SORT, PDC 18/4 Li 5,2 Set, SURFIX SYS3-SET, RTS 400 REQ-Plus + SYS-STF 80x133 + HSK-A 80x130, MFT 3 + SYS-MFT fixing set + FSZ 120, FSZ 300 + Veritas Parf Dogs, CMS-TS 55 R Set + all accessories, DOMINO  KV-SYS D8, KS 120 UG-Set KAPEX + all accessories.........

Offline jobsworth

  • Posts: 5271
  • Does Anyone Know What Time It Is?
Re: What Festool Did You buy Today?
« Reply #1286 on: April 27, 2018, 11:53 AM »
@niky1

I got a pica pencil looks just like that wo the festool logo.

Pica Pencils are pretty nice.

Comes real handy especially the colored lead.

 I use the red and yellow as much as the reg lead.

I got a couple of the festool ones coming.

After seeing you post and the picture , I ordered some of them well just because they got "festool" written on them which means they write much better  [big grin]
« Last Edit: April 27, 2018, 12:01 PM by jobsworth »

Offline jobsworth

  • Posts: 5271
  • Does Anyone Know What Time It Is?
Re: What Festool Did You buy Today?
« Reply #1287 on: April 27, 2018, 11:57 AM »
After seeing and searching for the festool pica pencils I ordered a couple and seen this knife and got a couple coming to.

 I already have the swiss army knife, but this is a cool looking knife. It has festool on it to so its got to be sharper then all the other knives  [big grin]

« Last Edit: April 27, 2018, 12:02 PM by jobsworth »

Offline ear3

  • Posts: 3594
Re: What Festool Did You buy Today?
« Reply #1288 on: May 05, 2018, 07:49 AM »
Bluetooth finally came back in stock at my local dealer!  CT module + controller and a 5.2Ah BT compatible battery.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Offline jobsworth

  • Posts: 5271
  • Does Anyone Know What Time It Is?
Re: What Festool Did You buy Today?
« Reply #1289 on: May 05, 2018, 10:57 AM »
Got a couple of interface pads for my RO 150 and ES 150, and another one for my RS 400