Author Topic: What Festool Did You buy Today?  (Read 383641 times)

0 Members and 1 Guest are viewing this topic.

Re: What Festool Did You buy Today?
« Reply #570 on: March 20, 2016, 04:52 PM »
Just a 5mm domino cutter this week
Lots of the green stuff :))

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Vimmelman

  • Posts: 12
Re: What Festool Did You buy Today?
« Reply #571 on: March 20, 2016, 05:35 PM »
Accidently bought a Vecturo and a MM adapter.

It looked so lonely, had to give it a home.

Offline jgalowitch

  • Posts: 1
Re: What Festool Did You buy Today?
« Reply #572 on: March 21, 2016, 07:58 PM »
I took the plunge today and bought my first Festool! I got the Domino joiner and can't wait to get started.

Offline rst

  • Posts: 1946
Re: What Festool Did You buy Today?
« Reply #573 on: March 21, 2016, 09:14 PM »
I liked the Vac one so much that I ordered the two.  I already have two of the Virutex vac clamps but bought the Festools because of the versatility of clamping options.  There have been comments regarding the price of these but compared to the industrial systems that are available, these and the Virutex are deals.  There are systems that the glass industry uses the are essentially the Vac I one on a pedestal ($3600.00) or table mount ($4000.00) 

Offline erock

  • Posts: 1254
Re: What Festool Did You buy Today?
« Reply #574 on: March 21, 2016, 09:37 PM »
 6mm Sipo domino tenons.     [cool]

ETS EC 125 Hard pad.     [big grin]

Fein adapter for the Vecturo.    [wink]

Nothing big......

Eric

Offline tms0425

  • Posts: 101
Re: What Festool Did You buy Today?
« Reply #575 on: March 21, 2016, 10:45 PM »
CXS set, 2 TS55 blades, and a couple more Quick Clamps, can't have enough ;-)

Offline Jckssn

  • Posts: 6
Re: What Festool Did You buy Today?
« Reply #576 on: March 24, 2016, 12:39 PM »
I got my hands on some lightly used Festool's last weekend from a guy who sold out all of his tools.

T18+3 Plus
Centrotec 2015W
PS 300 EQ-plus
TS55R with 2x 1400mm guide rails (going to sell the saw since i already got an TS55)

And also a DS400 sander and a d27/d36 cleaning set in old systainers.

The T18+3, Centrotec, PS300 and TS55 looks brand new, and the DS400 is in great condition.  [big grin] [thumbs up]

Offline niky1

  • Posts: 16
Re: What Festool Did You buy Today?
« Reply #577 on: March 24, 2016, 01:22 PM »
Just a Drill bit set, D 15-35 CE-Zobo this week .......
TS 55 EBQ, 2 x FS 1400/2, FS 800/2, PS 420 EBQ - Plus,  OF 1010 EBQ - Set + accessories, CXS Li 1,3 - Set, CXS Li 2,6 - 90 Limited Edition, DF 500 Q-Set + SORT-SYS DOMINO, set  ZOBO system, SYS 1 CE-SORT, PDC 18/4 Li 5,2 Set, SURFIX SYS3-SET, RTS 400 REQ-Plus + SYS-STF 80x133 + HSK-A 80x130, MFT 3 + SYS-MFT fixing set + FSZ 120, FSZ 300 + Veritas Parf Dogs, CMS-TS 55 R Set + all accessories, DOMINO  KV-SYS D8, KS 120 UG-Set KAPEX + all accessories.........

Offline Twoodman66

  • Posts: 95
Re: What Festool Did You buy Today?
« Reply #578 on: March 24, 2016, 06:53 PM »
Ts55,decided to update sold my atf55e. Got 10 years problem free. And I'm a little guilty to say I sold it for almost the price I originally paid.

Offline Staniam

  • Posts: 691
  • Enjoy what you do. Build something.
Re: What Festool Did You buy Today?
« Reply #579 on: March 24, 2016, 07:15 PM »
Two more 5ah batteries for my new TSC 55  [big grin]
LA Lakers - Oakland Athletics
The Arsenal: Festool - PDC, CXS, RO 125, TS55 REQ, OF 1010 EQ, CT MIDI;  Bosch - JS572EBL, JS120, 1294VSK, PS22

Offline mkasdin

  • Posts: 119
Re: What Festool Did You buy Today?
« Reply #580 on: March 24, 2016, 07:23 PM »
I took the plunge today and bought my first Festool! I got the Domino joiner and can't wait to get started.
And your first post.

Offline Mort

  • Posts: 353
  • World's Tallest Midget
Re: What Festool Did You buy Today?
« Reply #581 on: March 25, 2016, 10:39 AM »
Sold my Carvex, bought an RO90. I'm not sure how I've lived this long without that magnificent little machine.
I hate signatures.

Offline jobsworth

  • Posts: 5192
  • Does Anyone Know What Time It Is?
Re: What Festool Did You buy Today?
« Reply #582 on: March 25, 2016, 01:10 PM »
Well it isn't a festool but because festool doesn't make one I thought it would be OK to post it here.
My delta thickness planer died so since parts are unavailable over here and to cost of the. Parts I decided to buy another one,

I got me a Makita 2012NB 110v planer

Offline Grakat

  • Posts: 227
Re: What Festool Did You buy Today?
« Reply #583 on: March 25, 2016, 09:36 PM »
Picked up the Domino DF500 with Domino systainer today. Learning curve coming up.
Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55, RO150

Offline Holmz

  • Posts: 4010
Re: What Festool Did You buy Today?
« Reply #584 on: March 25, 2016, 10:12 PM »
Picked up the Domino DF500 with Domino systainer today. Learning curve coming up.

Once you have one, then you have glasses for what to make, and everything appears to be domino'able.

Offline travisj

  • Posts: 189
Re: What Festool Did You buy Today?
« Reply #585 on: March 25, 2016, 11:23 PM »
I picked up some jig saw blades, the new catalog, and a Festool t-shirt.

Offline Flatsawn

  • Posts: 194
Re: What Festool Did You buy Today?
« Reply #586 on: March 29, 2016, 04:01 PM »
I convinced myself a ts75 was necessary[/img] [big grin]241044-0

Offline mleny77

  • Posts: 52
Re: What Festool Did You buy Today?
« Reply #587 on: March 29, 2016, 04:30 PM »
Bought the Empty Domino Tenon Systainer last week, and just ordered the RO125 yesterday! Hi my name is Matt and I'm addicted to Festool.....  [unsure]

Re: What Festool Did You buy Today?
« Reply #588 on: March 29, 2016, 05:52 PM »
Just picked up a sys toolbox2 and ordered a 25m roll of 180g granat soft and 2m rule
Lots of the green stuff :))

Offline Flatsawn

  • Posts: 194
Re: What Festool Did You buy Today?
« Reply #589 on: March 29, 2016, 06:02 PM »
Bought the Empty Domino Tenon Systainer last week, and just ordered the RO125 yesterday! Hi my name is Matt and I'm addicted to Festool.....  [unsure]

Hi Matt.....Don't expect us to help you though, we're enablers.

Offline sofa_king_rad

  • Posts: 100
Re: What Festool Did You buy Today?
« Reply #590 on: March 31, 2016, 10:32 PM »
Bought my first Festool Tools today. I picked up a CT Mini and a bunch of systainers a couple years ago, but hadn't purchased any tools yet. Today I went all in:


Items Ordered
1 of : Festool 488030 Clamping Elements for Use with Festool MFT Table, 2-pack

1 of : Festool 489570 Screw Clamps For Festool MFT And Guide Rail System, 4-11/16" (120 Mm), 2-pack

2 of : Festool 491594 Quick Clamp For Festool Mft And Guide Rail System, 6 5/8" (168 Mm)

1 of : Festool 496149 6 Inch Multi-jetstream Hard Pad For RO150 FEQ 1-Per Pack
1 of : Festool 496151 Stickfix Polishing Pad For RO150FEQ

1 of : Festool 496978 6" Sandpaper - 100 Grit - 100 Pack
1 of : Festool 496979 6" Sandpaper - 120 Grit - 100 Pack
1 of : Festool 496980 6" Sandpaper - 150 Grit - 100 Pack
1 of : Festool 496982 6" Sandpaper - 220 Grit - 100 Pack
1 of : Festool 497153 6" Sandpaper - 80 Granatit - 10 Pack

1 of : Festool 497690 Systainer SYS-STF D150 T-Loc

1 of : Festool 497694 Systainer SYS 1 BOX T-Loc

1 of : Festool 498410 Cloth Replacement Filter Bags For CT Mini Dust Extractor, 5-pack

1 of : Festool 499901 SYS-Storage T-Loc Systainer

1 of : Festool 561287 Kapex KS 120 Sliding Compound Miter Saw

1 of : Festool 571810 RO 150 FEQ Rotex Sander

1 of : Festool 574339 OF 1010 EQ Router

1 of : Festool PT3561556 TS 55 REQ

1 of : MFT/3 MultiFunction Table

can't wait to get started....now to figure out what to build  [blink]
TS55, MFT3, OF1010, RO 150, KAPEX, CT Mini

Offline copcarcollector

  • Posts: 1429
Re: What Festool Did You buy Today?
« Reply #591 on: March 31, 2016, 10:41 PM »
Got a few router parts, MFT cross braces and a Gecko to mess around with. "Beat" the price increase with The Tool Nut

Offline FOGNewbie

  • Posts: 134
Re: What Festool Did You buy Today?
« Reply #592 on: April 01, 2016, 07:38 PM »
Finally! I bought a 2nd MFT/3 Table. Wanted it for years. Hope to pick up the stabilizer bars and connector bar when I pick up the table.

Might be a while before I make a "big" Festool purchase since I do need to get a bandsaw and a jointer planner sometime down the road. Lots of accessories I could use. Maybe that will feed the Festool bug for a while... :'(

Offline McNally Family

  • Posts: 614
  • Festool Atomic Phaser Particle Blaster (APPB Set)
Re: What Festool Did You buy Today?
« Reply #593 on: April 01, 2016, 08:16 PM »
Just a couple little accessories on my list.
 
Festool 492526 Centrotec Hook Driver/Adapter
Festool 496169 Wet Filter for CT 26

Saved $2.00 by ordering before midnight!  Yay!
GREEN: In order of purchase = | CT26  |  RS 2 E | Hose w/ Sleeve 3.5m | 115mm X 226mm Hand Sanding Block | 80mm X 133mm Hand Sanding Block | HSK D21.5 5m hose | CT Boom Arm Bundle Set | 1080 Plate for custom MFT | OF 1400 EQ Router (metric) w/accessories | SYS-Rock BR10 | Cordless Sander RTSC 400 Set |  Cordless Delta Sander DTSC 400 Basic | Linear Sander LS 130 | PDC 18/4 set | CXS  2.6Ah Set | Installer Cleaning Set (2018 version) |  New style Festool hose D 27/32 x 3,5m AS/CT | Replacement Hose Garage | Remote control CT-F I/M-Set | MFH1000 work stool | Next purchase: TBD

RED: // Mafell P1cc  //  MT55cc  // Next purchase: TBD

Offline Kev

  • Posts: 7651
Re: What Festool Did You buy Today?
« Reply #594 on: April 01, 2016, 11:35 PM »

can't wait to get started....now to figure out what to build  [blink]

@sofa_king_rad

Systainer storage would make sense [wink] [big grin]

Offline sofa_king_rad

  • Posts: 100
Re: What Festool Did You buy Today?
« Reply #595 on: April 02, 2016, 04:56 AM »

@sofa_king_rad

Systainer storage would make sense [wink] [big grin]

Haha - I was thinking about that today. This will be my home garage shop with everything put away when not in use. i have 3 large steel racks already but need to do some reorganizing/spring cleaning. The racks I have are 24" deep, so I may move those and use for Totes for regularly house stuff and build out half of one wall for tool storage and work station.

I'm betting that has been discussed around here plenty, so I'll have to start digging the threads.

I also need to uplift my Ford Transit connect with shelving for my Systainers and work supplies.
TS55, MFT3, OF1010, RO 150, KAPEX, CT Mini

Offline Grakat

  • Posts: 227
Re: What Festool Did You buy Today?
« Reply #596 on: April 02, 2016, 06:37 AM »
Building your workshop is a very good way to get started. There are some very good workshop builds on here, some with very sexy systainer storage options.
Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55, RO150

Offline matte

  • Posts: 28
Re: What Festool Did You buy Today?
« Reply #597 on: April 02, 2016, 11:57 AM »
Just sold my mafell mt55cc complete with guide rails. And ordered a festool ts55 rebq plus fs. With 2 guiderails. 

Offline neeleman

  • Posts: 1189
Re: What Festool Did You buy Today?
« Reply #598 on: April 02, 2016, 12:07 PM »
Hi Matte,

That's just the opposite what others would do: change Mafell for Festool.
Any reasons for that?
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline matte

  • Posts: 28
Re: What Festool Did You buy Today?
« Reply #599 on: April 02, 2016, 12:52 PM »
Hi neeman. First i bought the mafell mt 55 cc. After that the lo50e router. Butt that was a bad one. So i sold the router and bought an of1400. I also want to route with the guiderail and that is not possible with the mafell guide rails. The next thing was that i really liked the plug in cord. Mafell also didn't had that. So for me the choice was clear. Go and sell the mafell and get the festool one. I really like the idea of working in a system.