Author Topic: What Festool Did You buy Today?  (Read 292787 times)

0 Members and 2 Guests are viewing this topic.

Offline niky1

  • Posts: 13
Re: What Festool Did You buy Today?
« Reply #1170 on: September 13, 2017, 01:51 PM »
CMS-TS 55 R Set
Dust extraction set CS 70 AB
Adjustable stop WA-AR
Extension table VL
Extension table VB-CMS
Stopper LA-CS 50/CMS
Saw blade holder SGA
Panther saw blade 160x2,2x20 PW12

Script cutter HW shank 8 mm HW S8 D11/60°

Uff, uff, uff .... [doh]
TS 55 EBQ, 2 x FS 1400/2, FS 800/2, PS 420 EBQ - Plus,  OF 1010 EBQ - Set + accessories, CXS Li 1,3 - Set, CXS Li 2,6 - 90 Limited Edition, DF 500 Q-Set + SORT-SYS DOMINO, set  ZOBO system, SYS 1 CE-SORT, PDC 18/4 Li 5,2 Set, SURFIX SYS3-SET, RTS 400 REQ-Plus + SYS-STF 80x133 + HSK-A 80x130, MFT 3 + SYS-MFT fixing set + FSZ 120, FSZ 300 + Veritas Parf Dogs, CMS-TS 55 R Set + all accessories.........

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Holmz

  • Posts: 4010
Re: What Festool Did You buy Today?
« Reply #1171 on: September 16, 2017, 06:09 AM »
... I got a new (used) Festool sander on the way.

Well the used sander arrived... Mrs asked what is THAT!



So that goes with the other used sander (DX93).
And the red 1/2 sheet sander, and the yellow 5"/6" random orbital.
Basically... "I shall not want" for more sanders. This really rounds out the stable. (Belt, corner, random-orbital and 1/2-sheet)

It looks like it has more frequent flier miles than average, as I removed the Yankee 220v male plug!
(I will put the Yankee plug onto a Nuetrik to go with the Au and Eu/Schumko for world-wide readiness.)
And then I tested it.
No odours, and the belt moved.

The only thing remaining is the frame, and some supply of the belts. Probably in the 240-600 range for veneer... But a few course ones for agro-work would be good to have on hand.

Offline rdr

  • Posts: 68
Re: What Festool Did You buy Today?
« Reply #1172 on: September 20, 2017, 12:08 PM »
Well technically I didn't make the purchase but its my money, got home from a few days away with work and SWMBO just casually said "oh I ordered you that saw thingy you were looking at its in the garage - welcome home"

low and behold a Kapex 120 was sat waiting for me in the garage  [smile]




She's a keeper  [smile] (SWMBO I mean well and the saw I suppose  [smile])

Offline VW MICK

  • Posts: 859
Re: What Festool Did You buy Today?
« Reply #1173 on: September 20, 2017, 01:15 PM »
Cool

Looks like you have a space ready for it too

Mick

Offline rst

  • Posts: 1569
Re: What Festool Did You buy Today?
« Reply #1174 on: September 20, 2017, 06:32 PM »
Just received PDC 18/4.  Used off Ebay $385.00, came in 90 Anniversary systainer, 90% angle attachment was only thing that looked used, charger was still wrapped in plastic, both batteries charged up.  Ordered the eccentric chuck...now going to give my son-in-law my Milwaukee 18v hammerdrill and older impact driver...he's not getting my new Milwaukee 18v hydraulic impact.   [cool]

Offline rdr

  • Posts: 68
Re: What Festool Did You buy Today?
« Reply #1175 on: September 21, 2017, 08:31 AM »
Cool

Looks like you have a space ready for it too

Mick

Yep handy that, the saw fits lovely and just slotted straight into the MFT holes that happen to be there too  [smile]




Offline jobsworth

  • Posts: 4563
  • Burger Babe Says: I Even Buy Green Bananas
Re: What Festool Did You buy Today?
« Reply #1176 on: September 25, 2017, 06:57 PM »
I bought 3 of these puppies

Loving the Calif sun....

Offline Goz

  • Posts: 78
Re: What Festool Did You buy Today?
« Reply #1177 on: October 01, 2017, 09:50 PM »
I bought 6 used classic Systainers. Two each of SYS1, SYS2, and SYS3.  They aren't pretty, but they were cheap! Going to take a shot at organizing my non-Festool tools.

Sent from my SM-G930R4 using Tapatalk


Offline rst

  • Posts: 1569
Re: What Festool Did You buy Today?
« Reply #1178 on: October 02, 2017, 09:39 AM »
Used Planex and CT36 AC off Ebay...seller included a ton of sandpaper, bags, and vest attachment.  $1500  [big grin]  Both daughters have extensive drywall projects coming up.  I've been using vac attached pole and hand sanders for years...this seems like a more efficient solution.

Offline VW MICK

  • Posts: 859
Re: What Festool Did You buy Today?
« Reply #1179 on: October 03, 2017, 02:07 PM »
Im not sure if this is the right folder for this. Ive seen this sort of thread in other forums ad thought it would be cool to do here and see if you guys think the same.

I just bought a replacement hose garage for my CT 26 and a Long life bag for it.  I got tired of messing around trying to empty the regular bags in the middle of a project. The hose garage, wel lets say I had a ooopps see and cracked.it. Tried to repair it but it didnt work.  So I bought a new one.


Hi @jobsworth
Can you believe how long this post has gone on

I do still click on it everytime I see it

Good work

Mick

Offline VW MICK

  • Posts: 859
Re: What Festool Did You buy Today?
« Reply #1180 on: October 03, 2017, 02:09 PM »
1179 replys I think

Mick

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3806
    • New Brit Workshop on YouTube
Re: What Festool Did You buy Today?
« Reply #1181 on: October 03, 2017, 03:46 PM »
1179 replys I think

Mick
No - 1180 because of your post !

Peter

Offline smirak

  • Posts: 33
Re: What Festool Did You buy Today?
« Reply #1182 on: October 03, 2017, 04:03 PM »
Technically it was yesterday, but I snagged the Pro5 from the classified section yesterday...

Offline montyss

  • Posts: 22
Re: What Festool Did You buy Today?
« Reply #1183 on: October 05, 2017, 08:13 PM »
Got a used fs3000 rail today ,best part is it never had a saw down it  :)

Offline jobsworth

  • Posts: 4563
  • Burger Babe Says: I Even Buy Green Bananas
Re: What Festool Did You buy Today?
« Reply #1184 on: November 27, 2017, 10:14 AM »
Due to the recon sale and my tool lust , I picked up a ETS 150 figgered I can use the same size paper as my RO 150. Talking to some folks this should give me a way better final finish and its my Xmas present.

Now non festool wise I ordered one of these filter stands


Oh and because I got the filter stand , I had to get a new HVLP Apollo Eco 4. Couldnt let the stand go to waste now can I

« Last Edit: November 27, 2017, 10:16 AM by jobsworth »
Loving the Calif sun....

Offline rst

  • Posts: 1569
Re: What Festool Did You buy Today?
« Reply #1185 on: November 27, 2017, 10:55 AM »
I bought an TSC - 55 and a C-18, no batterys or charges as I have two chargers and 7 batteries.  Also bought CXS.  I have a bunch of Milwaukee 12V (seven) and 18V (nine) tools.  When I bought the PDC, I retired my 18V hammerdrill, and decided to try the other Fesdrills.  The Festool drills are really smooth and quiet, happy so far..

Online Michael Kellough

  • Posts: 3030
Re: What Festool Did You buy Today?
« Reply #1186 on: November 27, 2017, 11:10 AM »
I bought an TSC - 55 and a C-18, no batterys or charges as I have two chargers and 7 batteries.  Also bought CXS.  I have a bunch of Milwaukee 12V (seven) and 18V (nine) tools.  When I bought the PDC, I retired my 18V hammerdrill, and decided to try the other Fesdrills.  The Festool drills are really smooth and quiet, happy so far..

Have a bunch of M12 stuff, check.
Wanted a smaller more refined drill/driver, check.
Bought a CXS, check.
Happy so far, check.

Online Cheese

  • Posts: 3728
Re: What Festool Did You buy Today?
« Reply #1187 on: November 27, 2017, 12:07 PM »
I purchased a new charger for the CXS drill as a loose ground from the electrical pole outside the house, took out 2 of my Festool chargers.

Offline pettyconstruction

  • Posts: 367
Re: What Festool Did You buy Today?
« Reply #1188 on: November 27, 2017, 01:23 PM »
Picked up a TSC-55 a few weeks ago and used it last weekend.Nice
Charlie


Sent from my iPhone using Tapatalk Pro

Offline jcameron42

  • Posts: 1
  • I was made to create!
Re: What Festool Did You buy Today?
« Reply #1189 on: November 27, 2017, 01:30 PM »
Picked up on the recon sale a
Kapex
HL-850 Planer
Rotex 150



Sent from my iPhone using Tapatalk
MFT-3, TS 55 REQ, OF 1400 EQ, DOMINO DF 500 Q-SET + DOMINO SYS, CT MINI, CARVEX PS 420 EBQ-PLUS, CXS LI 2.6 - SET, SYS-CENTROTEC 2015, SURFIX OS SYS3/SET, SYS-NWZ,

Offline Master Carpenter

  • Posts: 50
Re: What Festool Did You buy Today?
« Reply #1190 on: November 27, 2017, 08:15 PM »
Picked up a hkc 55 from the recon sale last week, added a t18 + 3 this morning on cyber Monday. Looking forward to trying the airstream batteries. With 4 on the ready, I should be all set to cut and screw.
Ts 55, Ts 75, of 1010, lr 32, mft, mfs 700, RO 150 x2 + paper asort, RO 90 + paper asort, pro 5, df 500 + dom asort, hl 850 e, ti 15, cxs, centrotec set, ct48, ct sys, vac sys, 32;55x2;118 tracks, a stack of sys and an og festool first aid kit. Kapex

Offline bnaboatbuilder

  • Posts: 128
Re: What Festool Did You buy Today?
« Reply #1191 on: December 01, 2017, 10:37 AM »
Not Festool but Festool-like.

Got a Makita 118" rail for $174 with included freight shipping. I consider that a steal compared to Festool's rail at $366. My Makita cordless track saw will be the main use. Haven't used my TS75 since getting the Makita.

Making closet cabinets will be the next project to try it out.

- John

Offline Jim_in_PA

  • Posts: 9
Re: What Festool Did You buy Today?
« Reply #1192 on: December 05, 2017, 06:23 PM »
Ordered a Domino 700XL Set and some other things today from Mr. Marino...'looking forward to "Domino-ing myself to death" over time. :)
----
ETS 150/3, Rotex 150, OF1010, OF1400, Trion PS 300, TDK-12, CT-22, MFT 1080, TS55, Domino XL DF 700, 8' track, (2) 55" tracks

SCM MiniMax S315WS, FS350, MM16

Offline Slartibartfass

  • Posts: 923
  • How'ur'duin'......
    • The Accidental NAINA Store Email List
Re: What Festool Did You buy Today?
« Reply #1193 on: December 05, 2017, 06:37 PM »
After a long hiatus the Planer HL 850....

Offline jobsworth

  • Posts: 4563
  • Burger Babe Says: I Even Buy Green Bananas
Re: What Festool Did You buy Today?
« Reply #1194 on: December 06, 2017, 09:15 PM »
Its a nice planer. I got one I bought used. Get that one fence (angle stop) it definitely comes in handy planing doors.Ive been wanting the undulating head for it, I got some projects coming up that the undulating head would be awesome for
Loving the Calif sun....

Offline SoonerFan

  • Posts: 333
Re: What Festool Did You buy Today?
« Reply #1195 on: December 06, 2017, 10:04 PM »
My most recent purchases have been LR32 / holey rail, ETS EC 125 and then most recently some Systainers and router accessories.

Offline jobsworth

  • Posts: 4563
  • Burger Babe Says: I Even Buy Green Bananas
Re: What Festool Did You buy Today?
« Reply #1196 on: December 08, 2017, 10:07 AM »
bump
Loving the Calif sun....

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3806
    • New Brit Workshop on YouTube
Re: What Festool Did You buy Today?
« Reply #1197 on: December 08, 2017, 12:13 PM »
I have bought more storage solutions - a Sort 12 (my second one) and a Sort 6. I have put 3 large and 6 small drawers in each of the two bodies and they are now full !

272330-0

This is a clip from the yet to be edited video that will cover these and some metal cutting with the Kapex.

Peter

Offline jobsworth

  • Posts: 4563
  • Burger Babe Says: I Even Buy Green Bananas
Re: What Festool Did You buy Today?
« Reply #1198 on: December 08, 2017, 04:47 PM »
@Peter Parfitt

no more videos, ya cost me a fortune after I watched the last one [not worthy]
Loving the Calif sun....

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3806
    • New Brit Workshop on YouTube
Re: What Festool Did You buy Today?
« Reply #1199 on: December 09, 2017, 01:57 AM »
@Peter Parfitt

no more videos, ya cost me a fortune after I watched the last one [not worthy]

Hi Ron,

I am almost halfway through the filming so it is going to happen I am afraid. Anyway, it is a way of getting my own back as I now have a hotdog obsession all because of you !

Cheers.

Peter