|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
RL
 Offline
Location: Canada Member Since: Feb 2010
Posts: 2116
|
 |
« Reply #1 on: August 17, 2012, 04:46 PM » |
|
Is there that much to say about a $350 metal stool with a drawer?  |
|
|
|
|
Logged
|
I like green.
|
|
|
duburban
Offline
Location: Vermont Member Since: Sep 2011
Posts: 377
|
|
« Reply #2 on: August 17, 2012, 05:16 PM » |
|
seriously... step away from the festool for a second before you pop down cash for that. why not get another one of the numerous highly efficient sanders?
|
|
|
|
|
Logged
|
ts75, ts55, ro150feq, ets150/3, trion, ct26, mft1080, estension wings, of1400, parallel guides, dts400, df500,
|
|
|
dinkjs
Offline
Location: Grapevine, Texas Member Since: Oct 2009
Posts: 194
|
|
« Reply #3 on: August 17, 2012, 06:50 PM » |
|
Who said anything about buying it? I just threw the link out for discussion
|
|
|
|
|
Logged
|
|
|
|
|
ericbuggeln
Guest
|
|
« Reply #4 on: August 17, 2012, 07:20 PM » |
|
I built one that will last 100 yrs for $75 and some scrap, case closed.
|
|
|
|
|
Logged
|
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6387
|
|
« Reply #5 on: August 17, 2012, 07:38 PM » |
|
The MFH will undoubtably fit into some work flows and provide an off the shelf solution to some. On the Festool UK site it was marketed to the automotive field originally. Rick has commented on the hefty construction of the unit at the forum woodworkingcafe.com in this thread: http://www.woodworkingcafe.com/forum/showthread.php?501-Hmmm-Freight-company-wants-to-know-if-I-ll-be-homeI think that the real reason there hasn't been much talk is that there aren't many of these out in circulation. Peter Most important note from Peter as a Moderator: This topic has proven to be extremely controversial in other forums. The posting behavior that occurred elsewhere will not be tolerated here (discussed and agreed unanimously by all the admin staff here). |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Jesse Cloud
Offline
Location: Placitas, NM Member Since: Jan 2007
Posts: 1451
Festooling at the end of a dirt road in New Mexico
|
|
« Reply #6 on: August 17, 2012, 11:16 PM » |
|
For one thing, it kinda falls between the cracks. Its not a powertool, and as I understand its use, its not a hand tool either. Should we start a forum for backside tools?  |
|
|
|
|
Logged
|
|
|
|
Tom Bellemare
Festool Dealer
Offline
Location: Austin, Texas - USA Member Since: Nov 2007
Posts: 3557
Festool demo's & personal service in Central Texas
|
|
« Reply #7 on: August 18, 2012, 11:24 AM » |
|
The biggest reason I haven't said anything about it is that I haven't laid hands on one yet.
I have a demo' on order and as soon as I get it, I will be able to comment legitimately. I don't know of any in Texas yet.
Tom
|
|
|
|
|
Logged
|
|
|
|
Alan m
Offline
Location: Ireland Member Since: Aug 2010
Posts: 2998
|
|
« Reply #8 on: August 18, 2012, 04:27 PM » |
|
The MFH will undoubtably fit into some work flows and provide an off the shelf solution to some. On the Festool UK site it was marketed to the automotive field originally. Rick has commented on the hefty construction of the unit at the forum woodworkingcafe.com in this thread: http://www.woodworkingcafe.com/forum/showthread.php?501-Hmmm-Freight-company-wants-to-know-if-I-ll-be-homeI think that the real reason there hasn't been much talk is that there aren't many of these out in circulation. Peter Most important note from Peter as a Moderator: This topic has proven to be extremely controversial in other forums. The posting behavior that occurred elsewhere will not be tolerated here (discussed and agreed unanimously by all the admin staff here). i dont think that will happen here peter. we are all festool geeks. we see the value in the brand . most others dont. i would love one but cant afford those kind of luxuaries in my shop. an old ofice chair does me. its great in the shop as its height adjustable yes its expensive for just a chair but it is built to last. it could probably out last its rivals a few times. its a shame they didnt optimise it for the woodworking industry. i would like it to have been designed for systainers and have the pegboard type sheet metal (from the workcenter) on the sides so that you could hang tools on the side. |
|
|
|
|
Logged
|
now
ts 55+2 1400 rails+ 1 lr32 1400 rail, domino+assortment systainer+ domiplate, ct 22 with boom arm+home made thien baffel, lr32 set, rotex 150, home made MFT,home made work center, 6 t locs for other tools, of2000 , ro 90, mft 800, trion , ls 130
wish list
of 1400, MFT 3,, even more t locs for other tools
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
|
|
|
RL
Offline
Location: Canada Member Since: Feb 2010
Posts: 2116
|
|
« Reply #9 on: August 18, 2012, 04:36 PM » |
|
The MFH will undoubtably fit into some work flows and provide an off the shelf solution to some. On the Festool UK site it was marketed to the automotive field originally. Rick has commented on the hefty construction of the unit at the forum woodworkingcafe.com in this thread: http://www.woodworkingcafe.com/forum/showthread.php?501-Hmmm-Freight-company-wants-to-know-if-I-ll-be-homeI think that the real reason there hasn't been much talk is that there aren't many of these out in circulation. Peter Most important note from Peter as a Moderator: This topic has proven to be extremely controversial in other forums. The posting behavior that occurred elsewhere will not be tolerated here (discussed and agreed unanimously by all the admin staff here). i dont think that will happen here peter. we are all festool geeks. we see the value in the brand . most others dont. i would love one but cant afford those kind of luxuaries in my shop. an old ofice chair does me. its great in the shop as its height adjustable yes its expensive for just a chair but it is built to last. it could probably out last its rivals a few times. its a shame they didnt optimise it for the woodworking industry. i would like it to have been designed for systainers and have the pegboard type sheet metal (from the workcenter) on the sides so that you could hang tools on the side. I think it does have the pegboard on the sides. |
|
|
|
|
Logged
|
I like green.
|
|
|
fshanno
Offline
Location: Silsbee TX Member Since: Sep 2007
Posts: 582
|
|
« Reply #10 on: August 18, 2012, 11:26 PM » |
|
It would make a good door prize at Festool events. The thing that would be nice to have but hard to justify.
I do want to discuss one thing. If you lock all four wheels does it become a step stool? Or does it carry a disclaimer that you should not stand on it even with the wheels locked?
|
|
|
|
|
Logged
|
The one thing we learn from history is that we never learn from history.
|
|
|
leakyroof
Offline
Location: USA Member Since: Mar 2011
Posts: 319
|
|
« Reply #11 on: August 21, 2012, 09:48 AM » |
|
After reading Peters caution about flaming this poor stool, I'm adding more thoughts along the lines of you good people might not know how much decent well made metal storage costs in the automotive world....  My toolbox was 8K, empty, no tools, in 2003. I wonder what a similar unit costs from Snap-On today...  I think the workplace or jobsite intergration for some will be a real benefit, which is what Festool probably had in mind all along. While I have no need, and um, no space in my shop for it[  ], I wait to see how all the clever people who DO end up with one of this use them. I'm always learning new tricks about tool storage and transportation from the rest of the world, and Festool seems to help drive us along even if we don't always buy all the storage options they offer. My only gripe about fixed height stools in any application is that it's rarely putting me or the work at the height I really want-durn it all...  So I guess I'll wait for the adjustable height stool with storage and the ability to act as a small work platform . But that might put me back into the 8K category of cost again, so maybe not...  It still seems to me that this stool is best paired with the WorkCenter, so you end up being able to put a few systainers on top of your extractor, and leave the WorkCenter paired to the Stool and not on top of your CT. If I owned one, that's what I'd do. |
|
|
|
« Last Edit: August 21, 2012, 10:11 AM by leakyroof »
|
Logged
|
|
|
|
Holzhacker
Offline
Location: Chicago, IL Member Since: Mar 2009
Posts: 678
|
|
« Reply #12 on: August 21, 2012, 10:08 AM » |
|
I've been keeping my eyes open for a cheap, used CT22 to mount my WCR on. I just can't mount it on my main 22 or 36. This could fit the bill if the WCR can be mounted on it. However, for $350 it is a pretty steep price. At $275-295 I'd go for it. By the time you add tax its pushing $400. That's a pretty hefty price tag. I'll wait to check it out at my dealer but if it can't handle heavy abuse it isn't worth the price tag. I know at the end of a long, frustrating day with a PIA client its going to get 'tossed' into the back of the truck.
|
|
|
|
|
Logged
|
"The Code is not a ceiling to reach but a floor to work up from"
|
|
|
RonWen
Retailer
Offline
Location: One of the Thirteen Original Colonies of the United States of America. Member Since: Feb 2009
Posts: 1519
|
|
« Reply #13 on: August 21, 2012, 10:35 AM » |
|
After reading Peters caution about flaming this poor stool, I'm adding more thoughts along the lines of you good people might not know how much decent well made metal storage costs in the automotive world.... My toolbox was 8K, empty, no tools, in 2003. I wonder what a similar unit costs from Snap-On today... I think the workplace or jobsite intergration for some will be a real benefit, which is what Festool probably had in mind all along. While I have no need, and um, no space in my shop for it[ ], I wait to see how all the clever people who DO end up with one of this use them. I'm always learning new tricks about tool storage and transportation from the rest of the world, and Festool seems to help drive us along even if we don't always buy all the storage options they offer. My only gripe about fixed height stools in any application is that it's rarely putting me or the work at the height I really want-durn it all... So I guess I'll wait for the adjustable height stool with storage and the ability to act as a small work platform . But that might put me back into the 8K category of cost again, so maybe not... It still seems to me that this stool is best paired with the WorkCenter, so you end up being able to put a few systainers on top of your extractor, and leave the WorkCenter paired to the Stool and not on top of your CT. If I owned one, that's what I'd do. You are correct, when you look at premium tool chests and Vidmar style cabinets the MFH isn't really out of line. No doubt Sears Craftsman has lower quality, lower cost options. The only question is does a woodworker need that kind of premium Festool quality in a stool -- I don't know if I "need" it but it does appeal to me. As with most, every cubic inch of shop space is dear and I'm always looking for ways to optimize my space. For my purposes I would have preferred that the MFH1000 have two or more drawers instead of the space between the drawer and the seat. That is fixable. Also instead of more than doubling the cost of the stool by adding the optional tool rack on top I'd prefer to build a simple solution using 80/20 extrusions or similar. By doing that it can be offset to the backside of the stool so that the stool is still useful to sit on. |
|
|
|
|
Logged
|
|
|
|
Nathan Lee
Offline
Location: U.K Member Since: Mar 2012
Posts: 13
|
|
« Reply #14 on: August 21, 2012, 11:11 AM » |
|
If someone pulled up with that to a site I was running I'd tell them to get there tools, sitting down during work hours is highly unprofessional
|
|
|
|
|
Logged
|
|
|
|
RonWen
Retailer
Offline
Location: One of the Thirteen Original Colonies of the United States of America. Member Since: Feb 2009
Posts: 1519
|
|
« Reply #15 on: August 21, 2012, 12:09 PM » |
|
If someone pulled up with that to a site I was running I'd tell them to get there tools, sitting down during work hours is highly unprofessional
In my 20's, 30's or 40's I wouldn't have thought of sitting while working. As time goes on and nature takes it's toll on my body sitting looks pretty good.  |
|
|
|
|
Logged
|
|
|
|
builderbob
Offline
Location: Connecticut Member Since: Feb 2007
Posts: 937
|
|
« Reply #16 on: August 21, 2012, 12:22 PM » |
|
If someone pulled up with that to a site I was running I'd tell them to get there tools, sitting down during work hours is highly unprofessional
So, if someone had to install 30 Baldwin lock sets on your 4000 square foot remodel, you would tell them to hit the trail for having a place to comfortably work? Regardless of cost, that stool has a place to keep a small collection of task specific tools which I see as being organized and very productive. Now, if the guys are playing human bowling down the long hallway, that's a different story!!! As a guy who has knee & back sensitivity (I'm in my mid 30's), I'm always looking for ways to allow myself to extend my time in this business! Just looking from the other side of the coin! Bob |
|
|
|
|
Logged
|
Kapex, TS55, Domino, MFK 700, OF 1400, OF 1010, RAS 115, RTS 400, ETS 150/3, ETS 125, CT 22 (2), C 12 (2), T-15+3, T-12+3, PSB 300 & more MFT's than i can count!
|
|
|
Alex
 Online
Location: The Netherlands Member Since: Nov 2008
Posts: 2805
|
|
« Reply #17 on: August 21, 2012, 12:46 PM » |
|
If someone pulled up with that to a site I was running I'd tell them to get there tools, sitting down during work hours is highly unprofessional
Yeah, but in the body shop business we're just pretty lazy. We love to work sitting.  We even have these beds, so we can lie down, safely out of sight.   People, don't try to pass judgement on this MFH 1000 while envisioning it in any other setting than the body shop, that's what it's meant for. It's not for the woodworker, the train driver or a trapeze worker. It is for the body shop, and sitting down while working has nothing to do with being lazy, but all with ergonomics. As for the cost, these things get tossed around all day so they need to be sturdy and that comes with a price tag. |
|
|
|
« Last Edit: August 21, 2012, 02:40 PM by Alex »
|
Logged
|
|
|
|
GhostFist
Online
Location: Canada Member Since: Oct 2010
Posts: 1069
|
|
« Reply #18 on: August 21, 2012, 02:33 PM » |
|
Fair points made here. Not personally interested in this product. A few systainers and a Dolly suit my rolling stool needs just fine.
|
|
|
|
|
Logged
|
|
|
|
leakyroof
Offline
Location: USA Member Since: Mar 2011
Posts: 319
|
|
« Reply #19 on: August 21, 2012, 02:43 PM » |
|
If someone pulled up with that to a site I was running I'd tell them to get there tools, sitting down during work hours is highly unprofessional
Yeah, but in the body shop business we're just pretty lazy. We love to sit working. [ ERROR: SPECIFIED ATTACHMENT MISSING ] We even have these beds, so we can lie down, safely out of sight. [ ERROR: SPECIFIED ATTACHMENT MISSING ] People, don't try to pass judgement on this MFH 1000 while envisioning it in any other setting than the body shop, that's what it's meant for. It's not for the woodworker, the train driver or a trapeze worker. It is for the body shop, and sitting down while working has nothing to do with being lazy, but all with ergonomics. As for the cost, these things get tossed around all day so they need to be sturdy and that comes with a price tag. Your picture is worth a thousand words.. That's my exact complaint of fixed height stools.. The man who's buffing the vehicle may need to get lower, which means hunching over on the stool, or stand up to work as holding the tool above your head isn't really an option for control. The arc of comfortable working zone as it might be known, is narrow. Great if the height agrees with you. I like the stool, but could not use one where I work. However, there's a Dent Buster guy that's a friend of mine, he might just like the stool, seated while removing dents out of vehicles. He's got a stool now, but I'll show him this one.. |
|
|
|
|
Logged
|
|
|
|
RonWen
Retailer
Offline
Location: One of the Thirteen Original Colonies of the United States of America. Member Since: Feb 2009
Posts: 1519
|
|
« Reply #20 on: August 21, 2012, 04:11 PM » |
|
Your picture is worth a thousand words.. That's my exact complaint of fixed height stools.. The man who's buffing the vehicle may need to get lower, which means hunching over on the stool, or stand up to work as holding the tool above your head isn't really an option for control. The arc of comfortable working zone as it might be known, is narrow. Great if the height agrees with you. I like the stool, but could not use one where I work. However, there's a Dent Buster guy that's a friend of mine, he might just like the stool, seated while removing dents out of vehicles. He's got a stool now, but I'll show him this one.. [/quote] You'll notice that the auto is on a lift so he can continually adjust for the optimum working height. Of course that also supports an argument that he could stand while doing the entire job...  |
|
|
|
|
Logged
|
|
|
|
sheeschen
Offline
Location: Campbell, CA Member Since: Jul 2011
Posts: 47
|
|
« Reply #21 on: August 21, 2012, 06:55 PM » |
|
There were a few of these rolling around the workshop in Lebanon during the week-long cabinet class I recently took - they're nice and sturdy, well-built, etc. $350? Kind of steep - for me. I ordered a few things after the class, but the MFH was not one of them. I didn't examine them in detail or take any pictures, since I wasn't interested in getting one (and didn't realize how much discussion they would generate here!).
Still, they were comfy. By the end of the week, we were all looking for them to sit on while Brian explained stuff. We spent a lot of time on our feet, so we appreciated the breaks by then. Not a great height for most woodworking on an MFT, but if it's for auto body work, okay then. It sounds like the Shinex was brought to the US on the urging of some German car manufacturer, so maybe this is the same kind of deal. Since Festool is already importing them, why not offer them to everybody?
|
|
|
|
|
Logged
|
|
|
|
leakyroof
Offline
Location: USA Member Since: Mar 2011
Posts: 319
|
|
« Reply #22 on: August 21, 2012, 08:48 PM » |
|
Your picture is worth a thousand words.. That's my exact complaint of fixed height stools.. The man who's buffing the vehicle may need to get lower, which means hunching over on the stool, or stand up to work as holding the tool above your head isn't really an option for control. The arc of comfortable working zone as it might be known, is narrow. Great if the height agrees with you. I like the stool, but could not use one where I work. However, there's a Dent Buster guy that's a friend of mine, he might just like the stool, seated while removing dents out of vehicles. He's got a stool now, but I'll show him this one.. [ ERROR: SPECIFIED ATTACHMENT MISSING ] [/quote] It is very rare to see a car detailed or buffed on a rack. 9.9 times out of Ten, it's on a flat stall since the available racks make more money being used for other things. |
|
|
|
|
Logged
|
|
|
|
TomGadwa1
Offline
Location: United States Member Since: Apr 2011
Posts: 247
|
|
« Reply #23 on: August 21, 2012, 11:17 PM » |
|
I thought the WCR100 was fairly expensive when I first ordered it. But after using it I have decided that it represents a fair value. It is built like a tank and does help for hanging sanders and the domino for instance. Most likely the same will prove to be true with this work stool. It looks to be well built. Now if I can just figure out how to install a lift for moving my projects up and down!!!
|
|
|
|
|
Logged
|
TS55 EQ OF1400 EQ DFQ 500 Q RO 125 LR32 SET Guide Rail Acc Kit Parallel Guide Set MFK 700 EQ Set MFS700 ETS 150/3 EQ Domino Cutter Assortment T15-3 Drill Set RO 90 EQ Workshop Cleaning Set CT36 Kapex 120 MFT/3 LR32 1080 FS 1400 FS 1900 WCR1000 PSB300 Boom Arm Set Clamping Elements RS 2 E Kapex UG Set Zobo Forstner Set Centrotech Installers Set OF1010 OF2200 ZS-OF 2200 SYS1000 Syslite CT MIDI FS 800
There Are Those That Can Do, There Are Those That Can Not Do, Those That Can Not Do Have Those That Can Do Do The Things That They Can Not Do So That They Feel That They Have Done Something.
There ain't no something for nothing machine.
|
|
|
Alan m
Offline
Location: Ireland Member Since: Aug 2010
Posts: 2998
|
|
« Reply #24 on: August 22, 2012, 03:00 AM » |
|
I thought the WCR100 was fairly expensive when I first ordered it. But after using it I have decided that it represents a fair value. It is built like a tank and does help for hanging sanders and the domino for instance. Most likely the same will prove to be true with this work stool. It looks to be well built. Now if I can just figure out how to install a lift for moving my projects up and down!!!
iv seen pictures of benchs mounted to lifting pallet trucks. it raises and lowers the way you want |
|
|
|
|
Logged
|
now
ts 55+2 1400 rails+ 1 lr32 1400 rail, domino+assortment systainer+ domiplate, ct 22 with boom arm+home made thien baffel, lr32 set, rotex 150, home made MFT,home made work center, 6 t locs for other tools, of2000 , ro 90, mft 800, trion , ls 130
wish list
of 1400, MFT 3,, even more t locs for other tools
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
|
|
|
Tom Bellemare
Festool Dealer
Offline
Location: Austin, Texas - USA Member Since: Nov 2007
Posts: 3557
Festool demo's & personal service in Central Texas
|
|
« Reply #25 on: August 22, 2012, 12:49 PM » |
|
Now if I can just figure out how to install a lift for moving my projects up and down!!! There are a lot of different lifting tables. There's a guy that sells one specifically for woodworking but I'm not finding it. Tom |
|
|
|
|
Logged
|
|
|
|
dwillis
Offline
Location: Centennial, Colorado Member Since: Feb 2008
Posts: 43
|
|
« Reply #26 on: August 22, 2012, 01:03 PM » |
|
I can't tell you how big a fan I am regarding Festool (my shop and checkbook can attest to my loyalty to the brand), but seriously, a $350 rolling stool? For those of you who buy it, I wish you well. I'll stick to my inverted five gallon bucket when installing lock sets or just taking a break in the shop. |
|
|
|
|
Logged
|
Remember that the only scientist to walk on the moon was a geologist. Dr. Harrison Schmitt - Apollo 17 - Valley of Taurus-Littrow - 11 to 17 December 1972.
|
|
|
zapdafish
Offline
Location: Holly Springs, NC Member Since: Apr 2010
Posts: 304
|
|
« Reply #27 on: August 22, 2012, 01:21 PM » |
|
Now if I can just figure out how to install a lift for moving my projects up and down!!! There are a lot of different lifting tables. There's a guy that sells one specifically for woodworking but I'm not finding it. Tom Only reason I know of this link is because I am agonizing over getting this kit. I might have to put myself out of my misery and get it.  |
|
|
|
|
Logged
|
CT22, TS55, Kapex, RO150, Domino, RS 2 E
|
|
|
RonWen
Retailer
Offline
Location: One of the Thirteen Original Colonies of the United States of America. Member Since: Feb 2009
Posts: 1519
|
|
« Reply #28 on: August 22, 2012, 01:34 PM » |
|
Now if I can just figure out how to install a lift for moving my projects up and down!!! There are a lot of different lifting tables. There's a guy that sells one specifically for woodworking but I'm not finding it. Tom Only reason I know of this link is because I am agonizing over getting this kit. I might have to put myself out of my misery and get it. I've considered the Adjustabench legs but they require manually lifting each end of the bench -- not ideal for a bad back. Another guy sells plans for a bench that uses automotive scissor jacks -- better. Now and again I put some thought into designing one using hydraulic cylinder(s) & electro pump.  |
|
|
|
|
Logged
|
|
|
|
zapdafish
Offline
Location: Holly Springs, NC Member Since: Apr 2010
Posts: 304
|
|
« Reply #29 on: August 22, 2012, 02:49 PM » |
|
I've considered the Adjustabench legs but they require manually lifting each end of the bench -- not ideal for a bad back. Another guy sells plans for a bench that uses automotive scissor jacks -- better. Now and again I put some thought into designing one using hydraulic cylinder(s) & electro pump. here ya go http://www.modelairplanenews.com/blog/2012/01/24/adjustable-workbench-how-to/ and another manual version http://videos.americanwoodworker.com/video/AWW-Adjustable-Height-Assembl-2actually video doesnt go with this pic, sorry, hehe  |
|
|
|
« Last Edit: August 22, 2012, 02:52 PM by zapdafish »
|
Logged
|
CT22, TS55, Kapex, RO150, Domino, RS 2 E
|
|
|
|
