Author Topic: Woodpeckers PGS vs Status Quo  (Read 1261 times)

0 Members and 1 Guest are viewing this topic.

Offline JimmyB1775

  • Posts: 14
Woodpeckers PGS vs Status Quo
« on: January 11, 2019, 12:15 PM »
I fell in love with the Woodpeckers track saw parallel guide system long ago, after using Festool's guides, and before having actually seen the Woodpecker PGS in real life. It was a retired One Time Tool. It had been retired 4 months before seeing it for the first time online, probably through a post here. Knowing their One Time Tool setup, it wouldn't be offered ever again for all practical purposes. So I researched and got Seneca's system. A little less than half the price. It was super easy to use, it uses Incra tracks and I trust Incra... so I got it. It's great. I built a walnut hanging rack for them. Oiled it, hanged it. Great. Now the Woodpecker people decided to make it a permanent tool. I use them far less than I thought I would but still....

What to do? I'm using FOG as a support group right now. Tell me the Seneca system is great. Tell me the Woodpecker system is overpriced. Anything. I want to buy the same tool twice (something I constantly vow not to do) and I don't even feel bad about it.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline PeterJJames13

  • Posts: 53
Re: Woodpeckers PGS vs Status Quo
« Reply #1 on: January 11, 2019, 12:25 PM »
The Seneca version is great. What I do like about the Woodpeckers, is how they can break down and store in a systainer. That being said, you already have a storage solution for the Seneca ones. I own both. I use my Seneca more.

Offline neilc

  • Posts: 2564
Re: Woodpeckers PGS vs Status Quo
« Reply #2 on: January 11, 2019, 05:16 PM »
I own the Festool and Seneca guides. I like the Seneca guides better.  I have two sets of Incra T-track for mine and that gives me all the adjustability I need in a home shop.  Fast to setup and break down.

I'd save the money for something you don't have a  solution for today.

Offline Sanderxpander

  • Posts: 193
Re: Woodpeckers PGS vs Status Quo
« Reply #3 on: January 11, 2019, 05:37 PM »
Maybe I'm overlooking something but doesn't the Festool version offer an optional attachment for narrow stock? Does that fit with these systems too?

Offline neilc

  • Posts: 2564
Re: Woodpeckers PGS vs Status Quo
« Reply #4 on: January 11, 2019, 06:16 PM »
Yes - Festool has a narrow stock attachment that fits to the right of the saw cut.


Seneca has an attachment for narrow stock that keeps the narrow stock under the guide rail.   You might need to provide an extra piece of lumber under the rail similar to cutting narrow stock without the guide. 


To me, narrow stock is where the table saw cannot be beat vs the track saw.




Offline JimmyB1775

  • Posts: 14
Re: Woodpeckers PGS vs Status Quo
« Reply #5 on: January 12, 2019, 04:56 PM »
Yes - Festool has a narrow stock attachment that fits to the right of the saw cut.


Seneca has an attachment for narrow stock that keeps the narrow stock under the guide rail.   You might need to provide an extra piece of lumber under the rail similar to cutting narrow stock without the guide. 


To me, narrow stock is where the table saw cannot be beat vs the track saw.

Agreed. They all do narrow stock.  The woodpeckers system looks the easiest to use but I just use my table saw for anything bigger than 24”-48”

Offline TSO Products

  • Retailer
  • *
  • Posts: 653
    • TSO Products
Re: Woodpeckers PGS vs Status Quo
« Reply #6 on: January 12, 2019, 09:47 PM »
- if you are not already subscribed to the TSO INSIDER newsletter, you may want to sign up now at
https://tsoproducts.com
so you receive the preview issue  featuring TSO's TPG-30 R Parallel Guide preparing to ship in a few short weeks.

You know TSO: Fast, accurate and easy - again [smile]
Hans and Eric
TSOproducts.com

Home of the GRS-16 and GRS-16 PE Guide Rail Squares -  the MTR-18 Triangle and Work Holding solutions

Offline pettyconstruction

  • Posts: 461
Woodpeckers PGS vs Status Quo
« Reply #7 on: January 12, 2019, 10:56 PM »
I have the Woodpeckers version and like it ,
But I think it’s real advantage is it’s portability.
Breaks down in a systainer for travel , if you are out of a shop ,other kinds maybe better suited.
Seneca, while using the Incra  track ,has a lot of appeal to be able to use the track in other applications .
Charlie


Sent from my iPad using Tapatalk Pro

Offline Roachmill

  • Posts: 82
Re: Woodpeckers PGS vs Status Quo
« Reply #8 on: January 13, 2019, 04:29 AM »
Using the Incra track makes for a very versatile setup. But the one hiccup with it is the track thickness/height as it raises the rail by as much. This means cutting stock thinner than the track involves "creativity" (or faffing around as some may call it) shimming things to get the rail perpendicular to the cut. The woodpeckers looks to alleviate some of that and I hope the TSO version does too. I was contemplating the Woodpecker kit but I'm now holding off to see TSOs take on it is.

I have the RipDogs version and it's one of the most used things in my arsenal since I don't have a table saw. But the Incra track makes working with anything below about ~13mm thickness take longer than I'd like.

Subscribed to the TSO newsletter and eagerly awaiting the next one!

Offline Mike Goetzke

  • Posts: 121
Re: Woodpeckers PGS vs Status Quo
« Reply #9 on: January 14, 2019, 09:41 AM »
- if you are not already subscribed to the TSO INSIDER newsletter, you may want to sign up now at
https://tsoproducts.com
so you receive the preview issue  featuring TSO's TPG-30 R Parallel Guide preparing to ship in a few short weeks.

You know TSO: Fast, accurate and easy - again [smile]
Hans and Eric

Hans/Eric - I received your email on this product. I have your GRS-16 PE and really like it. Would love to buy an edge guide from you but your edge guide needs to reference a perpendicular surface. Even though your GRS is very accurate over an 8' rip cut even being off by 1/10 of a degree would be unacceptable for most applications.

Offline TSO Products

  • Retailer
  • *
  • Posts: 653
    • TSO Products
Re: Woodpeckers PGS vs Status Quo
« Reply #10 on: January 14, 2019, 11:49 AM »
- if you are not already subscribed to the TSO INSIDER newsletter, you may want to sign up now at
https://tsoproducts.com
so you receive the preview issue  featuring TSO's TPG-30 R Parallel Guide preparing to ship in a few short weeks.

You know TSO: Fast, accurate and easy - again [smile]
Hans and Eric


Hans/Eric - I received your email on this product. I have your GRS-16 PE and really like it. Would love to buy an edge guide from you but your edge guide needs to reference a perpendicular surface. Even though your GRS is very accurate over an 8' rip cut even being off by 1/10 of a degree would be unacceptable for most applications.

Mike - we agree with your requirement for accuracy. The operation you describe has been successfully performed in use in a commercial operation for high-end home interior cabinetry. That said, for the every-day user ripping repeated 8 ft long cuts, we will also offer the TPG-30 L for use with the GRS-16 PE at the far end of very long cuts. In that arrangement you are not dependent on starting with a square edge at all.
For the most common shorter rip cuts, the use of just one TPG-30 (or the future TPG-20) will do the job reliably and without unnecessary attachments.
Yes, with the product launch we will announce the whole System line-up, including an upgrade program for early generation GRS-16 series which do not have the accessory mounting holes of the 2018 and newer production GRS-16 series.

thank you for giving us the opportunity to add this to the PREVIEW.

Hans
TSOproducts.com

Home of the GRS-16 and GRS-16 PE Guide Rail Squares -  the MTR-18 Triangle and Work Holding solutions