Author Topic: Woodpeckers Tools  (Read 2523 times)

0 Members and 1 Guest are viewing this topic.

Offline saands

  • Posts: 7
Woodpeckers Tools
« on: August 23, 2018, 04:07 PM »
I am considering buying some of Woodpecker's measuring tools for the shop. Given that they tend to be on the pricey side, I am considering limiting this purchase to 3-4 of their top tools. Given this, I am wondering if I can get your guidance on the following:
1. Which tools, if any, you find most useful for general woodworking and cabinetry? Squares, T-squares and triangles
2. Which of the Woodpecker measuring tools work nicely with Festool tools (e.g. MFT/3 table and other relevant tools) and the Saw Stop?

I do have engineer squares and a Starret combination square.

Thank you so much for your help with this question.

Saands

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ear3

  • Posts: 3590
Re: Woodpeckers Tools
« Reply #1 on: August 23, 2018, 04:21 PM »
You can't go wrong with the 1281.

But if you can manage to find them on the secondary market, I highly recommend either the 18" or even 26" framing squares.  I use the 26" one all the time to square my rail on sheet goods, and to set up the MFT.

You want to have a trusted method of drawing a long square line, and so the 32" T-square is a good secondary option if you can't find the 26" framing square.

One of the straight rulers usually good to have handy as well.  I have one where the measuring marks have the 0 in the center on one side, so it's easy to find the center on a wide board or do mirrored marking/layout.   
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Online Joe Felchlin

  • Posts: 128
  • Just another day in paradise - Livin’ the dream!
Re: Woodpeckers Tools
« Reply #2 on: August 23, 2018, 04:59 PM »
I agree with Ear3 - Exactly. Invaluable measuring/layout tools. All are great suggestions!
I accumulated mine (a wall full) over several years - And use each regularly.
Pricey. But, excellent tools that don’t wear out.
So... Just pick 2-3-4 and just add one every 6 months, or so.
FESTOOL: CT26 and CT33 E HEPA Dust Extractors, MFT 1080, MFT-3, TS 55 REQ-F-Plus USA, TS75 EQ, Guide Rails: 1080's/1400/3000mm, LR 32-SYS/Holey Rail, Parallel Guides and Extensions, OF1400 EQ Plunge Router, OF1010 EQ Plunge Router, HL 850 Planer, RO125 FEQ Rotex Sander, LS 130 EQ Linear Detail Sander, DX93E Detail Sander, C12 Cordless Drill, CXS Cordless Compact Drill Driver, SYS-Centrotec-Set, Domino XL DF 700 EQ Plus Tenon Joiner Set, Domino DF 500 Tenon Joiner | WOODPECKERS: DF 500 Offset Base System | BOSCH: 5412L Compound Miter Saw, 4100-09 10-Inch Table Saw | POWERMATIC: 60HH 8" Jointer, PWBS 14" Bandsaw w/Riser Block | MAKITA: 2012NB Bench Top Planer | JESSEM: Mast-R-Lift XL/Fence/Slide, Rout-R-Plate/Table Stand | RIKON: 50-120 6inX48in Belt-Disc Sander | JET: JBOS-5 Benchtop Oscillating Spindle Sander | PORTER CABLE: 7518 and 690LVRS Routers, 557 Pro Plate Joiner, 16/18/23 Gauge Nailers | LEIGH JIGS: D4R 24 Pro Dovetail Jig, FMT Pro Mortise & Tenon Jig | LIE-NIELSEN: Almost every hand plane | DOWELMAX: 3/8" and 1/4" | KREG: K3 Master System | FEIN: Multimaster FMM 250 Q Kit | TORMEK: Super-Grind 2000 | DUST DEPUTY: Industrial (ALL) Steel Deluxe Cyclone (2)

Offline ben_r_

  • Posts: 1077
Re: Woodpeckers Tools
« Reply #3 on: August 23, 2018, 05:21 PM »
Even with my Starret squares, my most used Woodpeckers tools are the 641, 1281, and 26" Framing Square (which is a One Time Tool). Followed behind by their 12", 24", 36" and 50" rulers with Hook Stops. I have quite a few other tools made by them, but those see even less use.
If at first you don't succeed, redefine success!

Offline Birdhunter

  • Posts: 2302
  • Woodworker, Sportsman, Retired
Re: Woodpeckers Tools
« Reply #4 on: August 23, 2018, 05:43 PM »
In order, 26” framing square, 1281 square, and the 12” ruler that has the zero in the center on one side and zero to 12” on the other side.

The ruler that goes from zero to 6” in both directions is fantastic for quickly finding the center of a board. There are shorter and longer versions of this ruler.
Birdhunter

Offline RKA

  • Posts: 1184
Re: Woodpeckers Tools
« Reply #5 on: August 23, 2018, 05:45 PM »
1281 (for checking square) and the 36" (or metric equiv) ruler with the center scale and a rule stop so I can use it like a story stick (useful for calibrating parallel guides - Festool or otherwise, and so many layout tasks).  I also have a 12"/300mm and the rule stop can be swapped to that as well. 
-Raj

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8517
  • Finger Lakes Region, NY State , USA
Re: Woodpeckers Tools
« Reply #6 on: August 23, 2018, 09:20 PM »
The 32" T-Square is great for sheet goods. Get a .9mm mechanical pencil.

The woodworking rules , rule. You will just have to pick a size. It's nice to have one longer and one shorter.

The largest square they currently have available.

Seth

Offline jobsworth

  • Posts: 5192
  • Does Anyone Know What Time It Is?
Re: Woodpeckers Tools
« Reply #7 on: August 24, 2018, 10:00 AM »
1281 square is their most popular square. when i took my first festool end user class it was the square we used to square the MFT. I now use either the Anderson ply square or the 45 cm OTT square for that.
 
My next most useful squae is their 3" triangle square, its awesome for setting te fence on my planer, blade on my saw etc etc.

They make a little 2" square which is useful along with their 36" straight edge/scale and a 12" scale with accessory stop that attached to the end plus a 6" scale which comes in very handy.

I have some others Ive bought which I dont really use much as the ones I mentioned do everything I need. But Im keeping the as they are OTT and though bought on a Gee thats cool basis they will come in handy eventually on certain jobs

Offline Cheese

  • Posts: 4826
Re: Woodpeckers Tools
« Reply #8 on: August 24, 2018, 10:42 AM »
The 4 Woodpeckers items I use the most, in order, are:

1. The 1281 square because if it accidentally hits the floor, it dents rather than breaks. Unfortunately I cracked my forged Starrett when it slipped off of some sheet goods. Use the Woodpeckers and keep the Starrett as a standard check.
 
2. The 18" square and/or the 26" square. I use the 18" more often because it's less bulky. The 26" square really is a beast.

3. The 49" woodworking rule with the rule stop.

4. One of the shorter Saddle T-squares. Perfect for transferring lines easily & accurately from the surface of a board to the edge.

My favorite Woodpeckers item though is the Bevel Square and Angle Reference Plate. It's not used that often but when it is, it brings a smile to my face...a really nice piece of equipment.

Offline waho6o9

  • Posts: 1369
    • Garage Door Handyman.com
Re: Woodpeckers Tools
« Reply #9 on: August 24, 2018, 10:49 AM »
284266-0
284268-1

Start with the 1281 and the DelVe square if you can.

Offline zapdafish

  • Posts: 479
Re: Woodpeckers Tools
« Reply #10 on: August 24, 2018, 11:44 AM »


1. Which tools, if any, you find most useful for general woodworking and cabinetry? Squares, T-squares and triangles

- I use the paolini rule all the time. I have 4 pocket versions. Already had 2 with black knobs and then took one of his classes and picked up 2 more because he had the chrome knobs.  [big grin] And a 18" version.

- story stick





CT22, TS55, Kapex, RO150, Domino, RS 2 E

Offline Peter_C

  • Posts: 658
Re: Woodpeckers Tools
« Reply #11 on: August 24, 2018, 01:10 PM »
I prefer the 1281ss for the line drawing/marking feature. Unfortunately it is a One Time Tool.
https://www.woodpeck.com/1281ss.html

The 26" square or the metric equivalent is perfect for squaring an MFT. You can rest it on a piece of wood to set the rail to fence square at working height.

Story stick has it's place for doing cabinetry layout work.

A smaller flat ruler is a necessity, but doesn't necessarily need to be Woodpeckers. Paolini though is well liked.

Offline ben_r_

  • Posts: 1077
Re: Woodpeckers Tools
« Reply #12 on: August 24, 2018, 05:50 PM »
(Attachment Link)
(Attachment Link)

Start with the 1281 and the DelVe square if you can.
Classy! I have the same setup!
If at first you don't succeed, redefine success!

Offline Steven Owen

  • Posts: 408
Re: Woodpeckers Tools
« Reply #13 on: August 24, 2018, 09:01 PM »
The Woodpeckers Story stick gets overlooked to often.  It’s a huge time saver for transferring marks for hardware and dominos on cabinet projects.

The Woodpeckers box clamps are great for drawer builds. 
Festool CT Midi, Festool ETS 125, DF 700 Domino Coming Soon

Offline Bill Chang

  • Posts: 49
Re: Woodpeckers Tools
« Reply #14 on: August 25, 2018, 09:03 AM »
1281 and larger square, center zero ruler (large) and a small one (I think mine is 6 or 8”).

Offline saands

  • Posts: 7
Re: Woodpeckers Tools
« Reply #15 on: August 27, 2018, 04:41 PM »
Hello everyone!

Thank you so much for your helpful responses to my question(s).

saands

Offline jimbo51

  • Posts: 429
Re: Woodpeckers Tools
« Reply #16 on: September 05, 2018, 07:53 AM »
I sent a note to Woodpecker and received no reply so I will ask the question here since Woodpecker has answered questions like this here before.

Does the new cross dowel jig adjust down to undersized 3/4" (23/32") plywood? The video shows it being used on plywood, but I would like confirmation.