Author Topic: Low Profile Clamping Elements  (Read 2616 times)

0 Members and 1 Guest are viewing this topic.

Offline cpw

  • Posts: 105
Low Profile Clamping Elements
« on: January 29, 2017, 03:29 PM »
It would be nice if there were alternative heads for the clamping elements that would have a thinner point of contact, like the low profile fence that came with the MFT-SYS-FX set, so you could secure thinner work pieces with them.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline neilc

  • Posts: 2594
Re: Low Profile Clamping Elements
« Reply #1 on: January 29, 2017, 03:31 PM »
I drop a 3/8" piece of scrap between the piece and the clamping element when I need clearance for sanding or other work.  You might try that until an alternative comes to market -

Offline ear3

  • Posts: 3623
Re: Low Profile Clamping Elements
« Reply #2 on: January 29, 2017, 05:13 PM »
The Veritas Bench blades don't have a lot of jaw travel, but properly shimmed out they can be useful when sanding thinner material when coupled with something like the low profile fence:,41637
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Re: Low Profile Clamping Elements
« Reply #3 on: January 29, 2017, 11:24 PM »
The Festool fence and the clamping elements are both way to thick.  You should at least be able to work with 12 mm Baltic Birch.  I think 9mm would be doable with ease.

And the screw clamps don't have enough reach.  If they were designed properly and thoughtfully, you should be able to reach a work piece that cover ups or partially covers up the next row of holes.

It's time to do a little design work and provide some basic functionality to match the high price of these components.