Author Topic: Wish List:Extractor Hose + Sander Cord combined  (Read 3911 times)

0 Members and 1 Guest are viewing this topic.

Offline tedrin

  • Posts: 14
    • Eco Star Painting
Wish List:Extractor Hose + Sander Cord combined
« on: May 23, 2018, 04:58 PM »
I have a ct26 and a few Festool sanders I use for my painting business. I currently wrap my sander cord around the Festool hose with a bunch of velcro wraps. I make it one unit like you see with the two hoses from air-assisted airless paint sprayers. They attach both hoses together. That's where I got the idea.

The problem is the velcro wraps don't keep the sander cord wrapped securely enough and it eventually loses slack and comes out of the plug on the extractor. It drives me nuts.

Festool: You could offer this as an option. A green extractor Hose + sander Cord attached together.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alex

  • Posts: 5692
Re: Wish List:Extractor Hose + Sander Cord combined
« Reply #1 on: May 23, 2018, 05:40 PM »

Offline Peter_C

  • Posts: 655
Re: Wish List:Extractor Hose + Sander Cord combined
« Reply #2 on: May 23, 2018, 07:11 PM »
Last years old style hose with the preffered connector is on super special in the USA. Not sure if they will ship to Canada. I can't believe they still have inventory.  [eek]
https://festools-online.com/500276-festool-11-1-2-ft-suction-hose-d27-22x3-5m.html

Many folks also just put a sleeve over the hose and shrink wrap the ends with the cord inside.

Offline McNally Family

  • Posts: 614
  • Festool Atomic Phaser Particle Blaster (APPB Set)
Re: Wish List:Extractor Hose + Sander Cord combined
« Reply #3 on: May 23, 2018, 11:26 PM »
I have a ct26 and a few Festool sanders I use for my painting business. I currently wrap my sander cord around the Festool hose with a bunch of velcro wraps. I make it one unit like you see with the two hoses from air-assisted airless paint sprayers. They attach both hoses together. That's where I got the idea.

The problem is the velcro wraps don't keep the sander cord wrapped securely enough and it eventually loses slack and comes out of the plug on the extractor. It drives me nuts.

Festool: You could offer this as an option. A green extractor Hose + sander Cord attached together.



Here is your Canadian source for the "sleeved Hose"

http://festoolownersgroup.com/festool-sales-dealer-area/tapered-sleeved-hoses-for-$199/msg545951/#msg545951
« Last Edit: May 23, 2018, 11:34 PM by McNally Family »
GREEN: In order of purchase = | CT26  |  RS 2 E | Hose w/ Sleeve 3.5m | 115mm X 226mm Hand Sanding Block | 80mm X 133mm Hand Sanding Block | HSK D21.5 5m hose | CT Boom Arm Bundle Set | 1080 Plate for custom MFT | OF 1400 EQ Router (metric) w/accessories | SYS-Rock BR10 | Cordless Sander RTSC 400 Set |  Cordless Delta Sander DTSC 400 Basic | Linear Sander LS 130 | PDC 18/4 set | CXS  2.6Ah Set | Installer Cleaning Set (2018 version) |  New style Festool hose D 27/32 x 3,5m AS/CT | Replacement Hose Garage | Remote control CT-F I/M-Set | MFH1000 work stool | Next purchase: TBD

RED: // Mafell P1cc  //  MT55cc  // Next purchase: TBD

Offline tedrin

  • Posts: 14
    • Eco Star Painting
Re: Wish List:Extractor Hose + Sander Cord combined
« Reply #4 on: May 24, 2018, 02:48 AM »
I have a ct26 and a few Festool sanders I use for my painting business. I currently wrap my sander cord around the Festool hose with a bunch of velcro wraps. I make it one unit like you see with the two hoses from air-assisted airless paint sprayers. They attach both hoses together. That's where I got the idea.

The problem is the velcro wraps don't keep the sander cord wrapped securely enough and it eventually loses slack and comes out of the plug on the extractor. It drives me nuts.

Festool: You could offer this as an option. A green extractor Hose + sander Cord attached together.



Here is your Canadian source for the "sleeved Hose"

http://festoolownersgroup.com/festool-sales-dealer-area/tapered-sleeved-hoses-for-$199/msg545951/#msg545951

Thanks!