Author Topic: Blade holder for ug cart.  (Read 2232 times)

0 Members and 1 Guest are viewing this topic.

Offline Alejandrom

  • Posts: 35
Blade holder for ug cart.
« on: November 30, 2015, 11:00 AM »
I don't know if there is a post for this, so I write what I think is a must have.
Does anyone know if there is something from festool or from aftermarket to hold the kapex blades that can be attached to the ug cart ? 

I think it can be placed at the bottom of the cart, because it is impossible to be placed on the sides of it due to the kapex arm/disarm movement. I think it could hold 2 or 3 blades, enought to have a replace and another/s for other purposes.

Waitting for your answers.


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alejandrom

  • Posts: 35
Re: Blade holder for ug cart.
« Reply #1 on: December 01, 2015, 09:08 AM »
127 visits and nothing to say ?


Offline neeleman

  • Posts: 1187
Re: Blade holder for ug cart.
« Reply #2 on: December 01, 2015, 10:03 AM »
Try Google Images: Saw Blade storage
There you'll find something which is usable.
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline Alejandrom

  • Posts: 35
Re: Blade holder for ug cart.
« Reply #3 on: December 01, 2015, 12:19 PM »
Thanks for the advice, buy it was the first thing I done before posting here.

Offline Peter_C

  • Posts: 595
Re: Blade holder for ug cart.
« Reply #4 on: December 01, 2015, 01:21 PM »
I keep meaning to make a blade holder for my Bosch stand. My idea is to take some wood and route a circle that the blades sit into to protect the blade from fingers. Then mount it under the stand. A simple wing nut would grant access to the blades.

Kinda like this just under the stand.

Offline tjbnwi

  • Posts: 5570
  • Cedar Tucky Indiana
Re: Blade holder for ug cart.
« Reply #5 on: December 02, 2015, 09:01 AM »
127 visits and nothing to say ?

May be that nobody has done this or wants to have the blades on the cart?

Stop, think about what you want, come up with a solution, post the resolve. You may start a new trend.

Tom