Author Topic: Drill Anti-Kickback  (Read 2711 times)

0 Members and 1 Guest are viewing this topic.

Offline jbasen

  • Posts: 689
Drill Anti-Kickback
« on: August 20, 2017, 07:31 PM »
Bosch has now introduced technology that reduces the risk of kickback in their drills.

https://www.boschtools.com/ca/en/more/news-and-extras/knowledge-center/contentpage_9.html

I wish Festool had this.  If Festool did I wouldn't have cartilage damage in my wrist from my T-18 kicking back on me.  [sad]

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Online Gregor

  • Posts: 541
Re: Drill Anti-Kickback
« Reply #1 on: August 21, 2017, 12:13 PM »
Yes, that would be a nice and very welcome feature.
But I would guess there is a patent on it so the outlook for the next ~20 years is bleak...

Offline rylim

  • Posts: 58
Re: Drill Anti-Kickback
« Reply #2 on: August 21, 2017, 01:45 PM »
FYI, the Anti-kickback technology has been there for years, and only Bosch drills have this technology. Wish the technology will become the mandatory safety feature for all the drills in the future.
Sale: Festool 498899 Assorted Domino Beech Tenons Set with Cutter Bits (5-Bits)- New - $265

Offline charley1968

  • Posts: 488
Re: Drill Anti-Kickback
« Reply #3 on: August 22, 2017, 12:09 PM »
Nope. Mafells A18 has kickback protection. Probably the Metabo pendant as well.
Just for today..

Offline Alec Buscemi

  • Posts: 29
Re: Drill Anti-Kickback
« Reply #4 on: September 10, 2017, 01:30 PM »
I have never had kick back on my c15. Isn't the torque control effective for this?  I have used it on hole saws, and any time it is close to binding, the machine beeps out, ensuring total safety. In fact I can't use any other older drill for such tasks, because the torque control on the c15 is so rapid and effective.

Offline LooseSox

  • Posts: 88
Re: Drill Anti-Kickback
« Reply #5 on: September 10, 2017, 05:29 PM »
That is part of the reason I chose Bosch when I upgraded my 18v gear. I had a Hitachi hammer drill near lift me up when the bit bound up drilling into masonary. I needed 6 visits to the physio to work on my wrist after that!

I haven't had the Bosch system kick in while in use, but I had 'tested' it by quickly moving the drill when operating in free air. The power is cut quickly and resets after the trigger is releaed.

Offline ben_r_

  • Posts: 791
Re: Drill Anti-Kickback
« Reply #6 on: September 16, 2017, 03:57 PM »
Nice. That's a cool feature. Wouldn't pay extra for it, but it would be nice to have as a standard.
If at first you don't succeed, redefine success!

Offline Laminator

  • Posts: 299
Re: Drill Anti-Kickback
« Reply #7 on: September 17, 2017, 10:29 PM »
I purchased a right angle drill to drill grommet holes just to eliminate the wrist (and knuckle) damage I suffered with a standard drill.   The main reason I purchased a PDC was for the right angle chuck which works well with 2" to 3" hole saws with no wrist damage.