Author Topic: Fe-stools!  (Read 3980 times)

0 Members and 1 Guest are viewing this topic.

Offline Louis84

  • Posts: 59
Fe-stools!
« on: October 30, 2014, 08:37 PM »
I want Festool to make an awesome adaptation to classic joiners saw stools with all the neat ideas and gadgetry. Just so they can call them.....FESTOOLS

Not like an MFT. They need to be able to stand to toughness of site work. Couple of holes for part-dogs, a sliding bar along one side to help support timber (almost like those cheating aids at bowling alleys) and give something to clamp to. A clamp track along the other side, that clamps can fit into, a non slip replaceable top that you can run your TS blade through. A some small compartments for holding bits in.

But mainly just so they can be called 'FE-STOOLS'!!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Healeyjet

  • Posts: 30
Re: Fe-stools!
« Reply #1 on: October 30, 2014, 09:00 PM »
While we are throwing out ideas, how about a Sys 1 with 4 Festool beer steins in it..............it would be called a........wait for it.....a Sy-steiner.  Then they could make a Sys 4 or 5 refillable keg with tap.
Just to celebrate Oktoberfest which is coming to a close.

This idea from a guy who doesn't even drink beer, LOL.

Ward

Offline Kev

  • Posts: 7651
Re: Fe-stools!
« Reply #2 on: October 31, 2014, 04:51 AM »
I'd like a large Systainer I could put my 19 year old son in when he's giving me grief ... the Systeener.

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Fe-stools!
« Reply #3 on: October 31, 2014, 05:56 AM »
I've seen one with a radio built in, but no one has ever named it properly. If I built one I'd call it the ...

SysTUNER!
Trying to be one of the most helpful members on the FOG.

Offline Sparktrician

  • Posts: 3676
Re: Fe-stools!
« Reply #4 on: October 31, 2014, 07:33 AM »
I've seen one with a radio built in, but no one has ever named it properly. If I built one I'd call it the ...

SysTUNER!

You could have one for fishing and call it a SysTuna... 

(That really WAS bad!!!) 

 [tongue]

- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline Kev

  • Posts: 7651
Re: Fe-stools!
« Reply #5 on: October 31, 2014, 09:07 AM »
I've seen one with a radio built in, but no one has ever named it properly. If I built one I'd call it the ...

SysTUNER!

You could have one for fishing and call it a SysTuna... 

(That really WAS bad!!!) 

 [tongue]

While you were fishing on your Systender?

yeh - shoot me

Offline hrrb

  • Posts: 187
Re: Fe-stools!
« Reply #6 on: October 31, 2014, 10:01 AM »
Your suggestions make me feel systoned   [doh]

...but keep'em comin'

Offline greg mann

  • Posts: 1842
Re: Fe-stools!
« Reply #7 on: October 31, 2014, 10:57 AM »
Shane,

Please lock this thread before I shoot myself. [popcorn]
Greg Mann
Oakland, Michigan

Offline teocaf

  • Posts: 598
Re: Fe-stools!
« Reply #8 on: October 31, 2014, 11:03 AM »
you mean T-lock it?

Offline greg mann

  • Posts: 1842
Re: Fe-stools!
« Reply #9 on: October 31, 2014, 11:07 AM »
you mean T-lock it?

Well that response is just Classic. ::)
Greg Mann
Oakland, Michigan

Offline teocaf

  • Posts: 598
Re: Fe-stools!
« Reply #10 on: October 31, 2014, 11:12 AM »

Offline Tom Bellemare

  • Inactive Member
  • *
  • Posts: 5148
  • Festool demo's & personal service in Central Texas
    • Tool Home LLC
Re: Fe-stools!
« Reply #11 on: October 31, 2014, 11:30 AM »
Now that you mention it, Teo, I have two Fe-stools...




Both are really handy around the shop.


Tom
Tom Bellemare
Customer Svc
Tool Home LLC
www.tool-home.com
512-428-9140

Offline teocaf

  • Posts: 598
Re: Fe-stools!
« Reply #12 on: October 31, 2014, 02:31 PM »
Yeah, those are great for those who like to sit around in their shop.  Even better, I believe the one on the left is on the recon list right now. 
As for me, I'm waiting for the Festool hammock!

Offline jobsworth

  • Posts: 5293
  • Does Anyone Know What Time It Is?
Re: Fe-stools!
« Reply #13 on: October 31, 2014, 03:11 PM »
Now that you mention it, Teo, I have two Fe-stools...

(Attachment Link)


Both are really handy around the shop.


Tom

Im looking at that stool.  Just to put my work center on. that way I can hide my CTs under my MFTs Well except for the one with the boom arm