Author Topic: MFT3  (Read 3485 times)

0 Members and 1 Guest are viewing this topic.

Offline James Metcalf

  • Posts: 208
MFT3
« on: December 20, 2007, 05:53 PM »
My wish for 2008 would be that the legs of the new MFT3 would have in the design a method to make the new table match the old table height if the user is inclined to do so. This would solve some problems that will arise, as God makes Festool owner's in different sizes.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline jonny round boy

  • Posts: 3227
Re: MFT3
« Reply #1 on: December 20, 2007, 05:57 PM »
as God makes Festool owner's in different sizes.

Obviously God doesn't work for Festool, or else we'd all be the same size, and interchangeable, too! ;D
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline Eli

  • Posts: 2501
  • A Yankee in Kangaroo Court
    • Metafizix
Re: MFT3
« Reply #2 on: December 20, 2007, 06:00 PM »
Don't forget the impossible, that we'd all work together as a system...
Do nothing, stay ahead.

Offline James Metcalf

  • Posts: 208
Re: MFT3
« Reply #3 on: December 20, 2007, 06:11 PM »
God made some in metric, some in imperial. ::)

Offline Fred West

  • Inactive Member
  • *
  • Posts: 652
  • Festool Junkie Banner :o)
Re: MFT3
« Reply #4 on: December 20, 2007, 07:08 PM »
I am completely in agreement with James and they can make it in Imperitric sizes for all I care as long as I can match the height of the current MFTs.  8) Fred
Domino,TS 75, Trion PS 300, RO 150, ETS 150/5, DTS 400, RS 400, LS 130, RS 2, Deltex 93, CT 33 CT 22, CT Midi & 3 MFT 1080s, OF 1400, C 12, RAS 115, MFK 700, MFT/3 :o)

Offline Ned

  • Posts: 1147
Re: MFT3
« Reply #5 on: December 20, 2007, 07:45 PM »
Obviously God doesn't work for Festool, or else we'd all be the same size, and interchangeable, too! ;D

And maybe the MTBF wouldn't be any better, but factory spares would be available...

Ned

Offline Corwin

  • Posts: 2611
Re: MFT3
« Reply #6 on: December 20, 2007, 10:22 PM »
And maybe the MTBF wouldn't be any better, but factory spares would be available...

Ned


MTBF?  What's that, My Table Before Festool?
Looks like your rabbit joint is a hare off! ;)

Offline Ned

  • Posts: 1147
Re: MFT3
« Reply #7 on: December 20, 2007, 10:43 PM »
MTBF?  What's that, My Table Before Festool?

Good one, Corwin.   ;D  What I had in mind was Mean Time Between Failures, applied to us.

Ned

Offline Eli

  • Posts: 2501
  • A Yankee in Kangaroo Court
    • Metafizix
Re: MFT3
« Reply #8 on: December 20, 2007, 11:47 PM »
God made some in metric, some in imperial. ::)

Some are bimeasuring sexuals

(heh,heh)
Do nothing, stay ahead.