Author Topic: SYS-charger  (Read 1883 times)

0 Members and 1 Guest are viewing this topic.

Offline mlanders

  • Posts: 6
SYS-charger
« on: January 06, 2017, 11:37 AM »
After reading some posts the other day. Seeing that the new batteries will be coming to America in the next year, along with now having the HKC and TSC cordless saws and some users are commenting on having multiple batteries on the charger to keep up with them. I see it being useful to have a multi-battery charger built into a systainer so that use could have say 4-6 batteries on a job site nice and neatly packed away charging (less mess, less cords, mess to setup and move).

There were some comments having concern about dust getting into the AirStream batteries while charging in a work area. While having the chargers in a separate room is ideal it may not always be possible. Being inside of a systainer with the lid closed and having filtered vents (fresh air in and out) to keep the cool air flowing and the dust out allows the batteries to be in close proximity to where the work is being done.

I am not a contractor and this might not be a good idea but if i was in need of a new charger this would be something that I would be interested in (it would most likely live on top of my CT so that would always have the batteries at hand).

OF 1400, CT 36, TI 18+3, Carvex 420, Guide Rails 800 and 1400 with Guide Rail connectors, Sys-Mft

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Edward A Reno III

  • Posts: 2744
Re: SYS-charger
« Reply #1 on: January 07, 2017, 06:19 PM »
I agree, and I would even say that additional battery charging options don't just have to be confined to a systainer, or that the systainer could serve another function. I would point to Milwaukee as a great model for how to integrate battery charging into accessories, as they do, for example on their jobsite radio and their new light tower.

And it can be financially beneficial for the company as well.  When I purchased the M18 jobsite radio/charger the Summer before last, the battery charging capability was decisive in my decision to spend more money, as opposed to the regular Milwaukee radio I could have had for 50-60 dollars less.

 
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/420 FSK rail • Carvex 420 w/Accessory Kit • Domino 500 Set • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • RTS 400 • RAS 115.04 • HL 850 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline PreferrablyWood

  • Posts: 803
Re: SYS-charger
« Reply #2 on: January 07, 2017, 08:36 PM »
I have about 7 or 8 batteries so if there was a mulitbatteri unit in a systainer and if could safely manage heat build up, I'd be interested. Something that could hand 3 or 4 batteries at a time. I was actually considering making my own fireproof charging station haven't got round to it yet though...
850 HL E Planer rustic head standard head angle fence, MFS 400x2, MFS extensions 2 sets of MFS VB 700+1000. CMS GE, sliding fence, VB and 2x VL extension tables, OF 2200, Accessory Set ZS OF 2200 M,36mm 5m antistatik hose, CMS OF+ CMS TS 75 insert modules. SYS-MFT Fixing-Set,  3.5m sleeved hose, Syslite duo, Sys 4 sort 3 x3, Sys Roll, Sys 1 Box x2 , classic Sys 3-Sort 4, classic Sys 3 Sort 6 x2, Sys Cart x3 Systainer 4 x2  as toolbox with selfmade inserts Systainer 5 as toolbox with insert.
Festool 18V HKC 55 Li 5.2 EB Plus FSK 420,FSK 250, Extra blade for the HKC 55 W32.TI 15, CXS 2.6 Ah version, RO 90 DX, PDC 18/4 plus DC UNI FF depth stop chuck,AD 3/8 square socket holder FF chuck, Centrotec Bits; -->Bit holder and bit selection BHS 65 CE TL 24x, ,Bradpoint DB WOOD CE SET ,Zobo (Forstner) D 15-35 CE-Zobo SET ,Masonary/stone bits DB STONE CE Set,Extender BV 150 CE, Countersink QLS D2-8 CE Hook turner HD D18, end centrotec<--.  TS 75 EBQ, PSC 420, OF 1010, RS 300 EQ, CTL Midi, MFT 3, Parf dogs x2pair +Bench dogs x2pair, FS 1080, FS 1900 .  will get Domino DF 700 XL,  CMS insert BS 120 Belt sander.

Offline ben_r_

  • Posts: 245
Re: SYS-charger
« Reply #3 on: January 25, 2017, 11:44 AM »
I dont have any Festool cordless tools so havent kept up on the latest there. What is new about the new batteries that are coming to the US?
If at first you don't succeed, redefine success!