Festool Owners Group

FESTOOL DISCUSSIONS => Festool Wish List => Topic started by: adcolor on September 27, 2016, 01:11 PM

Title: Sys1 with drawer.
Post by: adcolor on September 27, 2016, 01:11 PM
A Sys1 with a drawer.  I would buy one for my C12.  Perfect for drills and accessories.  I have used a systainer with the top storage lid.  Not worth it, not enough room (I want to put a drill index in it that goes with me and the drill), or have other accessories in it, like common hole saws, etc.  And the lid was an issue due to a broken latch (too fragile for the way I work).
Title: Re: Sys1 with drawer.
Post by: SRSemenza on September 27, 2016, 07:46 PM
Yeah, I agree that size option would be good.  Maybe we will see more drawer combinations down the road.

Seth
Title: Re: Sys1 with drawer.
Post by: Steve-Rice on September 28, 2016, 08:30 AM
I'd like to see a separate drawer unit which could be added to any existing systainer.
Title: Re: Sys1 with drawer.
Post by: ajmdecorators on September 28, 2016, 12:23 PM
I was thinking this the other day, they really need to bring out a say 1 with a drawer
Title: Re: Sys1 with drawer.
Post by: mrrhum on November 18, 2016, 04:25 PM
Tanos makes (or used to make?) a single-depth set of drawers in the classic line (not T-Loc, unfortunately). Lee Valley has them at http://www.leevalley.com/US/wood/page.aspx?p=64653&cat=1,43326,68749 . Get it while you can, because it has disappeared from the Tanos products page at tanos.de.

I have one, but I found it to be a nuisance, being non-T-Loc, and ended up just making dividers for a regular Sys I.

What we really need is a T-Loc single-drawer Systainer.
Title: Re: Sys1 with drawer.
Post by: ajmdecorators on November 18, 2016, 04:33 PM
Yep me too, want one for my cxs and rts
Title: Re: Sys1 with drawer.
Post by: PreferrablyWood on December 14, 2016, 03:42 PM
I'd think the Sys combi small version would be the closest solution to what your looking for. A little more space so you could fit a drill and jigsaw would be bad.
Title: Re: Sys1 with drawer.
Post by: ben_r_ on January 25, 2017, 11:45 AM
Yea Id like to see such a combo offered too.
Title: Re: Sys1 with drawer.
Post by: DiscoStu on February 18, 2017, 04:19 AM
I'd like to see either a Sys 1 with a Drawer or a Sys 2 with a Sys 1 top and a drawer underneath. The option of a Sys 1 size drawer would be very flexible for a lot of uses.


Sent from my iPhone using Tapatalk
Title: Re: Sys1 with drawer.
Post by: jdw101 on May 01, 2017, 10:26 PM
I was thinking this the other day, they really need to bring out a say 1 with a drawer

Great idea, could have all kinds of sizes.
Title: Re: Sys1 with drawer.
Post by: Luzzy on May 26, 2017, 05:22 AM
I use Systainers for my everyday hand tool storage. I would LOVE having sys 1-5 drawer options , especially with two larger drawers in a 3 or 4. Something with twice the height of the current combi's.

It would make my mobile stack so much fore user friendly !!!
Title: Re: Sys1 with drawer.
Post by: Bob D. on May 26, 2017, 05:48 AM
I'd like to see a separate drawer unit which could be added to any existing systainer.

I like the sound of this. You could add a drawer into a stack wherever you wanted to and
it would be semi-permanently attached to the Sys above it in the stack. Meaning it would
mount to the underside of a Systainer with a more secure latch than the T-latch.

Then whatever tool you have you could add a drawer (or two) for accessories used with that
tool. A single drawer unit with dividers and deep enough to use the little storage boxes would
be great. I would get one for the router to hold bits, one for the drill for all sorts of accessories
as well as screws, and at least one or two more for miscellaneous bits and small hand tools.
Title: Re: Sys1 with drawer.
Post by: Henrik R / Pingvinlakrits on May 30, 2017, 12:41 PM
This is a great idea and thinking it over it is even more practical than one might think at first.

I have a plethora of drills - too many perhaps. It is a slight nuisance to keep track of some specialty bits and pieces for the drills when I bring the "right one" for the task at hand. A single drawer unit would sort it out by simply having all the bits and small pieces separate in a SYS Drawer and then simply add whatever drill I need for the day.

I know there is a Centrotec kit but it does not have all I use and too much that I don't. I prefer building my own kits.
I have been entertaining the idea of making a few inserts and have a SYS 1 with my own stuff. But - a drawer is just that much nicer in use and could be kept permanently at the bottom of the stack/pile/tower.