« previous next »
Pages: [1]   Go Down

Author Topic: v-groove jig element  (Read 7081 times)

0 Members and 1 Guest are viewing this topic.

Offline harry_

  • Posts: 1169
v-groove jig element
« on: July 21, 2010, 09:46 PM »
On our MFT/3`s, we have both the V-groove and the channel for our clamping elements. We can use the channel for custom jigs using flange bolts and the like. It would be cool we had a v-groove element that we could build jigs off of. A couple of bolt/screw holes in it and maybe make it be able fold down to 3/4 (ish) of an inch below the MFT/3 top, so the jig could be built upon or up right to attach jigs to it.

It just seems to me that the v-groove is under utilized.
Logged
Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Tom Bellemare

  • Inactive Member
  • *
  • Posts: 5148
  • Festool demo's & personal service in Central Texas
    • Tool Home LLC
Re: v-groove jig element
« Reply #1 on: July 21, 2010, 09:54 PM »
I know it doesn't really fulfill your desire, Harry, but the table extensions for the Kapex add some utility.


Tom
Logged
Tom Bellemare
Customer Svc
Tool Home LLC
www.tool-home.com
512-428-9140

Offline Dovetail65

  • Posts: 4596
    • Rose Farm Floor Medallions and Inlays
Re: v-groove jig element
« Reply #2 on: July 21, 2010, 09:55 PM »
I never understood the V-Groove and thought the only thing it did was make the table more proprietary to Festool(which I did not think was a good thing). We were promised all kinds of fancy jigs for it and I never saw that come about.

It seems the new fence could easily have worked with the old slot with little mod. A few use the new fence with the old table(me).
I never liked the idea of the V-groove because of making jigs etc and any jigs one did have would have to be remade. I love all my original 1080 tables  and feel they offer more versatility than the V groove table(Mft3).

I will keep my 1080's forever.
« Last Edit: July 21, 2010, 09:57 PM by nickao »
Logged
The one who says it can't be done should avoid interrupting the person doing it.

Offline Corwin

  • Posts: 2558
Re: v-groove jig element
« Reply #3 on: July 21, 2010, 11:53 PM »
Quote from: nickao on July 21, 2010, 09:55 PM
... A few use the new fence with the old table(me).
...

I don't have any of the new MFT/3s, so I'm not sure how you are attaching the new fence to your old tables.  Any pictures?  Details?
Logged
Looks like your rabbit joint is a hare off! ;)

Offline jonny round boy

  • Posts: 3224
Re: v-groove jig element
« Reply #4 on: July 22, 2010, 02:10 AM »
The bracket, clamp and screw off the new kapex extensions would seem to be ideal for this. When you get the new extensions, the parts will (should) be available for order as spares. It may even be possible to order them now, though you would have to wait for them to come from Germany.

I don't have time now, but I'll post some pics & get you some part numbers later today.
Logged
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline Hans Mertens

  • Posts: 127
Re: v-groove jig element
« Reply #5 on: July 22, 2010, 03:38 AM »
Quote
The bracket, clamp and screw off the new kapex extensions would seem to be ideal for this...

That was exactly what I thought, when I ordered them in the beginning of May, I'm still waiting.  My dealer warned me that it could take a while before it was delivered.
You can find the partnumbers in the Festool EKAT-catalogue.

EKAT - new Kapex extension go to "Sliding compound mitre saw" -> "Accessories" -> "497352 - Trimming attachment KA-UG-R"



« Last Edit: July 22, 2010, 03:40 AM by Mettes »
Logged

Offline Wood_Junkie

  • Posts: 1313
Re: v-groove jig element
« Reply #6 on: July 22, 2010, 08:56 AM »
Quote from: nickao on July 21, 2010, 09:55 PM
I never understood the V-Groove and thought the only thing it did was make the table more proprietary to Festool(which I did not think was a good thing). We were promised all kinds of fancy jigs for it and I never saw that come about.

Three words:
C-M-S
 [sad]
Logged

Offline Alex

  • Posts: 5668
Re: v-groove jig element
« Reply #7 on: July 22, 2010, 09:10 AM »
My CS70 also has the v-groove and it has 4 parts that fit in it: a table extension, a table widener, the cross fence and the angular unit. I think Festool is just trying to be universal with this v-groove on all their tables like the MFT, CMS and Precisio. It's not Festool's fault America won't accept products that are perfectly normal here in Europe out of silly and unreasonable  'safety concerns'.
Logged

Offline Dovetail65

  • Posts: 4596
    • Rose Farm Floor Medallions and Inlays
Re: v-groove jig element
« Reply #8 on: July 22, 2010, 11:28 AM »
Can anyone in the US get that stuff?

If it is not available in the US  it does not exist.(At least for anyone living here).

It has nothing to do with America and everything to do with Festool not wanting to sell it here.

I'll keep my 1080's and be happy with the ease a jig can be made to work with them.
« Last Edit: July 22, 2010, 11:33 AM by nickao »
Logged
The one who says it can't be done should avoid interrupting the person doing it.

Offline Greg Powers

  • Posts: 2270
  • Metric convert
    • Stargate Unofficiial
Re: v-groove jig element
« Reply #9 on: July 22, 2010, 06:40 PM »
Quote from: Corwin on July 21, 2010, 11:53 PM

I don't have any of the new MFT/3s, so I'm not sure how you are attaching the new fence to your old tables.  Any pictures?  Details?

Photos of MFT/3 profile:
« Last Edit: July 22, 2010, 06:42 PM by GPowers »
Logged
Greg Powers
Size:XL

Offline Corwin

  • Posts: 2558
Re: v-groove jig element
« Reply #10 on: July 22, 2010, 10:17 PM »
Thanks for your pictures, Greg, but what I wanted was to see how Nick modified the new fence to fit our old MFT tables.

Quote from: nickao on July 21, 2010, 09:55 PM
I never understood the V-Groove and thought the only thing it did was make the table more proprietary to Festool(which I did not think was a good thing). We were promised all kinds of fancy jigs for it and I never saw that come about.

It seems the new fence could easily have worked with the old slot with little mod. A few use the new fence with the old table(me).
I never liked the idea of the V-groove because of making jigs etc and any jigs one did have would have to be remade. I love all my original 1080 tables  and feel they offer more versatility than the V groove table(Mft3).

I will keep my 1080's forever.
Logged
Looks like your rabbit joint is a hare off! ;)
Pages: [1]   Go Up
« previous next »