Author Topic: 3M PPS Series 2 - Fuji  (Read 2449 times)

0 Members and 1 Guest are viewing this topic.

Offline jparker

  • Posts: 6
3M PPS Series 2 - Fuji
« on: June 17, 2018, 09:00 PM »
Does anyone happen to know if the 3M PPS Series 2 is going to have a H/O cup that will work with Fuji?  3M lists Series 2 adapters for Fuji guns but I don’t see any H/O cups available.

Thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ben_r_

  • Posts: 1119
Re: 3M PPS Series 2 - Fuji
« Reply #1 on: June 17, 2018, 09:41 PM »
Is the series 2 a new version of the PPS system? I didnt know they came out with a new one.
If at first you don't succeed, redefine success!

Offline duburban

  • Posts: 954
Re: 3M PPS Series 2 - Fuji
« Reply #2 on: June 17, 2018, 10:57 PM »
I just went all-in on series 1... No wonder there was confusion regarding the measuring markings during my shopping process...
helper: i used a festool "circular saw" to do something simple and it made it really hard

me: exactly, it makes simple cuts complicated and complicated cuts simple

Offline JCLP

  • Posts: 871
Re: 3M PPS Series 2 - Fuji
« Reply #3 on: June 18, 2018, 06:01 AM »
Series 2 requires new adapters for the new pressure cups, liners and lids. 3M in Canada, will exchange the adapters free of charge but you have to purchase the new cup and lids.

Cheers,
JC

Offline RKA

  • Posts: 1258
Re: 3M PPS Series 2 - Fuji
« Reply #4 on: June 18, 2018, 09:56 AM »
I just went all-in on series 1... No wonder there was confusion regarding the measuring markings during my shopping process...

Same here.  I saw v2.0, but couldn't find the H/O cups and gave up.  I suspect they may release them eventually, but for now, nada.
-Raj

Offline ben_r_

  • Posts: 1119
Re: 3M PPS Series 2 - Fuji
« Reply #5 on: June 18, 2018, 10:58 PM »
Whats the improvement for the Series 2 stuff? I recently bought all the Series 1 setup but havent even opened it all yet.
If at first you don't succeed, redefine success!



Offline ben_r_

  • Posts: 1119
Re: 3M PPS Series 2 - Fuji
« Reply #8 on: June 19, 2018, 11:26 AM »
A Fuji gun takes either a #S18 or a #S2.

https://multimedia.3m.com/mws/media/1451272O/pps-2-0-spray-cup-system-part-number-reference-guide.pdf
Looks like unless you have a Fuji G-XPC gun. That one looks to take the 26110 #S24 adapter.
If at first you don't succeed, redefine success!

Offline Cheese

  • Posts: 5064
Re: 3M PPS Series 2 - Fuji
« Reply #9 on: June 19, 2018, 11:27 AM »
I'm surprised 3M doesn't offer an adapter for the Graco handheld spray guns.  [sad]

Especially as they are both Minnesota based companies.
« Last Edit: June 19, 2018, 11:29 AM by Cheese »

Offline Dick Mahany

  • Posts: 384
Re: 3M PPS Series 2 - Fuji
« Reply #10 on: June 19, 2018, 11:40 AM »
I've held off investing in the 3M PPS wondering if it is a worthwhile enhancement.  Now maybe it's time to pull the trigger for my Fuji MM3 / T75 gun.
« Last Edit: June 19, 2018, 11:59 AM by Dick Mahany »

Offline ben_r_

  • Posts: 1119
Re: 3M PPS Series 2 - Fuji
« Reply #11 on: June 19, 2018, 12:22 PM »
I've held off investing in the 3M PPS wondering if it is a worthwhile enhancement.  Now maybe it's time to pull the trigger for my Fuji MM3 / T75 gun.
From everything Ive ever read or heard the Series 1 was definitely worth it, which was why I jumped on it. After doing a bit of research on this Series 2.0, it doesnt look like the parts are all available yet. Just some quick google searches didnt show any resellers selling the parts.
If at first you don't succeed, redefine success!

Offline jparker

  • Posts: 6
Re: 3M PPS Series 2 - Fuji
« Reply #12 on: June 19, 2018, 04:33 PM »
I reached out to 3M Customer Service and I was told that they plan to release an H/O cup but that no release date has been set.

Offline koenbro

  • Posts: 58
Re: 3M PPS Series 2 - Fuji
« Reply #13 on: June 26, 2018, 12:45 AM »
The PPS system is definitely worth it. Swap out finishes easily with much less cleaning. Will never go back.


Sent from my iPhone using Tapatalk
MFT/3 • TS 55 REQ • Carvex PS420 EBQ + Accessories • OF1400 + LR32 + MFS400 • Domino DF500 • ETS EC150/5 EQplus • DTS 400 REQplus • CXS • CT 26E • Fuji Q4 + 3M PPS