Author Topic: Applying KA+  (Read 1607 times)

0 Members and 1 Guest are viewing this topic.

Offline Zorty

  • Posts: 2
Applying KA+
« on: October 03, 2017, 06:05 PM »
I built some birch cabinets for my kitchen with shaker style fronts. I had originally planned on using Benjamin Moore Advance but now have read too many horror stories. I had also been planning on brushing the paint.

I decided instead to buy a paint sprayer so I purchased the Fuji HVLP hobby pro. Now I’m thinking about spraying SW KA+. I’ve never sprayed anything. I’ve read that there is a high learning curve to spraying KA+. Would you say this is true? Can I expect a near professional finish using KA+ with the FUJI hvlp?

From what I’ve read I think I need to do the following.

  • Wet with cloth, wait about an hour and sand to 220
  • Spray KA+ surfacer using 1.3 air cap set (am I supposed to use a primer before surfacer? This is bare wood, trying to get rid of grain) spray to at least 2.5 wet mills
  • Wait an hour; sand 220 and spray second coat of surfacer
  • Spray KA+ pigmented paint (white) with 1.0 air cap set 2 to 3 coats (waiting 30 minutes between coats)
  • Spray a KA+ Clear topcoat

What else am I missing? I’ve seen online posts heating up the ka+ and others using a retarder etc. Are these things I need to do? I’ve watched the Jeff Jewitt spraying videos so I understand straining paint etc.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline tjbnwi

  • Posts: 5306
  • Cedar Tucky Indiana
Re: Applying KA+
« Reply #1 on: October 03, 2017, 08:22 PM »
1) That will work.

2) Surfacer is the primer.

3) Can be as short as 15 minutes---use 240 grit. I use the ETS 125.

4) KA+ is not paint. 1.0 or 1.3. Depends on viscosity, use the Ford 4 to determine.

5) Not necessary, will give you more wear life.

Tom
« Last Edit: October 03, 2017, 09:03 PM by tjbnwi »

Offline Zorty

  • Posts: 2
Re: Applying KA+
« Reply #2 on: October 03, 2017, 09:09 PM »
Thanks Tom much appreciated!

Offline Hnnguyen85

  • Posts: 57
Re: Applying KA+
« Reply #3 on: October 11, 2017, 11:13 AM »
Do as Tom says and you'll get great results. I learned how to spray KA+ by picking his brain for a few weeks and I was able to get dead flat and smooth finish on my built-ins the first try. I love working with KA+ now and it's my go to paint.