Author Topic: My Paint Spray Setup with a Fuji MiniMite 4  (Read 6636 times)

0 Members and 1 Guest are viewing this topic.

Offline ben_r_

  • Posts: 821
Re: My Paint Spray Setup with a Fuji MiniMite 4
« Reply #60 on: October 11, 2017, 04:47 PM »
Okay thanks guys. Just heard back from AcmeTools who contacted Fuji directly and they confirmed that the Mini-Mite 4 will come with: "a standard 25-foot hose.  Only the more powerful 5-stage models have been repackaged with a more heavily reinforced hydraulic hose."

So I guess I will pick up the 6' Flexible Whip Hose #2049F to make the setup a little more easily maneuverable.

Lastly I am thinking of picking up the 1.0mm AirCap set to use with fine clear finishes like shellac and lacquer as I was reading the 1.4mm that comes with the gun might be a bit heavy for those thinner products. What do you guys think?
If at first you don't succeed, redefine success!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline tjbnwi

  • Posts: 5305
  • Cedar Tucky Indiana
Re: My Paint Spray Setup with a Fuji MiniMite 4
« Reply #61 on: October 11, 2017, 05:34 PM »
Okay thanks guys. Just heard back from AcmeTools who contacted Fuji directly and they confirmed that the Mini-Mite 4 will come with: "a standard 25-foot hose.  Only the more powerful 5-stage models have been repackaged with a more heavily reinforced hydraulic hose."

So I guess I will pick up the 6' Flexible Whip Hose #2049F to make the setup a little more easily maneuverable.

Lastly I am thinking of picking up the 1.0mm AirCap set to use with fine clear finishes like shellac and lacquer as I was reading the 1.4mm that comes with the gun might be a bit heavy for those thinner products. What do you guys think?

0.8mm

Tom

Offline ben_r_

  • Posts: 821
Re: My Paint Spray Setup with a Fuji MiniMite 4
« Reply #62 on: October 11, 2017, 05:37 PM »
Okay thanks guys. Just heard back from AcmeTools who contacted Fuji directly and they confirmed that the Mini-Mite 4 will come with: "a standard 25-foot hose.  Only the more powerful 5-stage models have been repackaged with a more heavily reinforced hydraulic hose."

So I guess I will pick up the 6' Flexible Whip Hose #2049F to make the setup a little more easily maneuverable.

Lastly I am thinking of picking up the 1.0mm AirCap set to use with fine clear finishes like shellac and lacquer as I was reading the 1.4mm that comes with the gun might be a bit heavy for those thinner products. What do you guys think?

0.8mm

Tom
For the GXPC gun there is no 0.8mm AirCap set. There is 0.7mm, 1.0mm, 1.4mm, 1.8mm and 2.0mm.
If at first you don't succeed, redefine success!

Offline tjbnwi

  • Posts: 5305
  • Cedar Tucky Indiana
Re: My Paint Spray Setup with a Fuji MiniMite 4
« Reply #63 on: October 12, 2017, 09:53 AM »
Okay thanks guys. Just heard back from AcmeTools who contacted Fuji directly and they confirmed that the Mini-Mite 4 will come with: "a standard 25-foot hose.  Only the more powerful 5-stage models have been repackaged with a more heavily reinforced hydraulic hose."

So I guess I will pick up the 6' Flexible Whip Hose #2049F to make the setup a little more easily maneuverable.

Lastly I am thinking of picking up the 1.0mm AirCap set to use with fine clear finishes like shellac and lacquer as I was reading the 1.4mm that comes with the gun might be a bit heavy for those thinner products. What do you guys think?

0.8mm

Tom
For the GXPC gun there is no 0.8mm AirCap set. There is 0.7mm, 1.0mm, 1.4mm, 1.8mm and 2.0mm.

I didn't recall it was the X series gun, sorry. When I saw 0.8, I figured T series.

Get the #2 (0.7mm).

Tom

Offline krudawg

  • Posts: 14
Re: My Paint Spray Setup with a Fuji MiniMite 4
« Reply #64 on: November 30, 2017, 09:11 PM »
Placed the order for a Fuji Mini-Mite 4 with GXPC gun yesterday. Wanted to jump on the AcmeTools 15% off. Was $670 shipped. Now I need to figure out what Aircap sets to pick up and to figure out this 3M PPS system and what parts to get for that.

I'm in the same boat.  I bought my Fuji MiniMite 4 Platinum w/T75 gun from a fuji authorized dealer on Ebay.  I've been hand painting my projects and got tired of the brush marks.  I have no clue how to spray paint and after spending about 30 minutes on this topic tells me that spraying is a little bit of science (paint mixing) and a little bit of luck with a lot of differing techniques.  The 3M PPS looks interesting and I may pick the system up so at least I can get the science part of spraying right.  Thanks all for the input.
Ted
Mft/3, DF 500, Hammer K3 Winner,
Former Marine E-4

Offline koenbro

  • Posts: 15
Re: My Paint Spray Setup with a Fuji MiniMite 4
« Reply #65 on: November 30, 2017, 11:55 PM »
 The 3M PPS system is spectacularly convenient. I use it with a Fuji T75 and will never go back to the regular cup.


Sent from my iPad using Tapatalk
MFT/3  w/QWAS dogs • TS 55 REQ • OF1400 w/MFS400 + LR32 • Domino DF 500 • ETS EC150/5 EQ-Plus • DTS 400 REQ Plus  • CT 26 E HEPA • Fuji Q4 Platinum HVLP w/T75G

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: My Paint Spray Setup with a Fuji MiniMite 4
« Reply #66 on: December 01, 2017, 02:46 PM »
Ended up with Advance topcoated with KA+ MRE.


Interesting, curious why you top coated Advance with KA (Kem Aqua) and MRE (???)
Thanks
Tim

Offline tjbnwi

  • Posts: 5305
  • Cedar Tucky Indiana
Re: My Paint Spray Setup with a Fuji MiniMite 4
« Reply #67 on: December 06, 2017, 08:57 PM »
Ended up with Advance topcoated with KA+ MRE.


Interesting, curious why you top coated Advance with KA (Kem Aqua) and MRE (???)
Thanks
Tim

@Tim Raleigh,

I just saw this. KA+ is Kem Aqua Plus, the MRE refers to the sheen for the clears--Medium Rubbed Effect, it will have a black glass reflection of 34-38.

Tom