Author Topic: Outdoor painting in the cold?  (Read 373 times)

0 Members and 1 Guest are viewing this topic.

Offline 3PedalMINI

  • Posts: 460
    • Signature Sound & Video
Outdoor painting in the cold?
« on: November 07, 2018, 08:56 PM »
Well, it looks like I ran out of time on my outdoor project. Its Hardie Plank siding pre-primed. My plan was to prime it with Loxon to be on the safe side (some of the printings on the back showed DOM in June so the pre-prime is already at EOL. However it looks like it can only be applied at temperatures at or above 52 degrees. For the foreseeable future it looks like were in the mid to high 40s so its no good to prime (any primer it seems like) And given how this weather has been I doubt we'll see 50s for a while, especially on the weekends or on days I could potentially take off. And if it does it 50's it will be raining. [blink]

Im planning on using exterior Duration which claims it is a primer/paint (I never trust that) but it can be applied down to 37 degrees. Everything ive read says it should be primed regardless with Loxon to prevent "fuzzing" especially if the pre-primed boards have expired. Could I use the first coat of Duration as the "primer"? I have spent way to much time and money on this shed and I dont want to cut corners now.

What should I do? Thanks!
The Bitterness of poor quality remains long after the sweetness of low price is forgotten -Benjamin Franklin

Professional Custom Audio Video System Designer/Installer serving Southern - Middle NJ, Eastern PA & the Surrounding Shore Points.
www.sigsv.com

Kapex 120,TS55,RO150,ETS125,CT-26,CT-MIDI,Tradesmen Cleaning Kit, Festool Ratchet Kit, Sys-lite, Sys Roll Cart, T18 +3, 2013 Centrotec Kit, Carvex 420, Carvex Accessory Kit, CXS,RO90, TI15 and Various Festool Systainers

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Peter_C

  • Posts: 693
Re: Outdoor painting in the cold?
« Reply #1 on: November 07, 2018, 10:36 PM »
Tarp it and heat it before painting. Gonna need a powerful heater though.

Offline Bert Vanderveen

  • Posts: 467
Re: Outdoor painting in the cold?
« Reply #2 on: November 08, 2018, 06:48 AM »
There is a Dutch company that makes and sells heated paint cans. That tells you something about our climate and inventiveness.
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 Mk2 · MFT/3 + TSB1-MW 1000 + VL + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 EQ · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · Centrotec Sets 2008 + 2015 · PSB300 · LR32-SYS · RO150 · Kapex KS120 · 2 x MFK700 · RO90 · OFK700 · BS75 · OFK500 · OF2200 · CMS-GE … | Mirka 1230L P&C | Hammer A3 31 Silent Power · Hammer N4400 

Online Pnw painter

  • Posts: 166
Outdoor painting in the cold?
« Reply #3 on: November 08, 2018, 10:05 AM »
I’ve painted at least 10 houses with new hardie siding and I didn’t prime any of them. Pretty much all the painting companies in my area skip priming hardie. I’ve used Duration on several occasions without priming and its held up exceptionally well. I’ve also had excellent results with BM Regal Select High Build.

A good rule of thumb for low temp painting is to start around 10:00 and quit around 3:00. Another issue you’ll probably run into is surfactant leeching. Low temps cause soaps in the paint to rise to the surface while its curing. It’ll make the sheen look splotchy. If this happens you can wipe off the surfactants with warm water and it doesn’t effect the long term integrity of the paint.








Sent from my iPhone using Tapatalk

Offline Alex

  • Posts: 5706
Re: Outdoor painting in the cold?
« Reply #4 on: November 08, 2018, 11:48 AM »
There is a Dutch company that makes and sells heated paint cans. That tells you something about our climate and inventiveness.

I don't understand this, once you apply the paint it's cold in a minute and you still have the problem of bad drying.

Sikkens now has a paint that they say can be applied  to 32F/0C but I've tried it last winter and really dislike it, it's still not optimal.

40F/5C degrees is just too cold to paint, I'd make sure bare wood is all primed so you don't get any rot during the winter, and then wait for better temperatures in spring to finish it.