Author Topic: Panabode  (Read 6532 times)

0 Members and 1 Guest are viewing this topic.

Offline Anna321

  • Posts: 7
Panabode
« on: October 14, 2013, 07:20 PM »
This is what i was able to do this summer with an old abandonned cabin with the help of Festools. I am so happy with the results. Actually the front patio window is temporary, we are looking for something that won't have middle post to block view.
« Last Edit: October 14, 2013, 08:24 PM by Anna »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Frank Pellow

  • Posts: 2748
  • Toronto, Ontario and Lake Pivabiska, Ontario
Re: Panabode
« Reply #1 on: October 14, 2013, 07:26 PM »
You did a great job on the restoration Anna!   [thumbs up]

By the way, your photo of the restored cabin is upside down and the first and fourth photos are the same.
Cheers,   
               Frank (Festool connoisseur)

Offline tjbnwi

  • Posts: 5306
  • Cedar Tucky Indiana
Re: Panabode
« Reply #2 on: October 14, 2013, 07:30 PM »
Sorry, I just had to fix this one.

Tom

Offline tjbnwi

  • Posts: 5306
  • Cedar Tucky Indiana
Re: Panabode
« Reply #3 on: October 14, 2013, 07:51 PM »
Your'e welcome.

Which sander? Replace the pad, if it is the RAS get the pad that accepts standard disk for the heavy work and the StickFix for the medium to light work.

Tom


Offline tjbnwi

  • Posts: 5306
  • Cedar Tucky Indiana
Re: Panabode
« Reply #4 on: October 14, 2013, 08:00 PM »
You read correctly, the heat destroys the pad. I have the same problem with the one on my Fien MM (I don't own a Deltex).

Tom

Offline Alex

  • Posts: 5496
Re: Panabode
« Reply #5 on: October 15, 2013, 03:33 AM »
Nice work on the cabin. Cleaned up real good.

As for the pad, you're best off buying a new one (pack of 2). These pads wear out quickly. I suggest buying the hard pad, they last longer than the standard (soft) ones. Upside is that they're not that expensive.

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 10926
  • Let's Redux / Revive / Rewind / Rollback the FOG!
Re: Panabode
« Reply #6 on: October 15, 2013, 05:57 AM »
Sorry, I forgot to rotate the images earlier.

Peter

94289-0

94291-1

94293-2

94295-3
Disclaimer:  I have been involved with the development of some TSO Products.  I have offered thoughts and ideas freely.  I am not paid but I may receive products during the development process or afterwards.

Offline Hud

  • Posts: 36
Re: Panabode
« Reply #7 on: November 27, 2015, 10:20 PM »
Sanding sealer is clear and gloss free if you do not build up a thick layer.  Sanding Sealer is a clear lacquer used by Pattern makers.  Dries real fast.  The cabin looks great

Offline Sparktrician

  • Posts: 3357
Re: Panabode
« Reply #8 on: November 28, 2015, 10:51 AM »
You might want to take a look at using Osmo PolyX Satin for the finish inside.  It would be a two-coat wipe-on/wipe-off in your case.  Try some on scrap material to see if you like it.  It has worked well where I've used it, and has left a very nice, satin finish that doesn't attract dust the way a pure oil seems to do over time. 
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline Cheese

  • Posts: 3716
Re: Panabode
« Reply #9 on: November 28, 2015, 05:41 PM »
This is an update on the panabode. We took almost a year off this project. If anyone has an idea on what to put as a finish on the inside walls please post your ideas. I would prefer a clear non glossy finish. I was thinking of a wax  or something similar that would be fairly easy to apply.

Have you considered one of the Festool Surfix oils? They leave a nice matte finish that brings out the grain of the wood. Easy to apply and long lasting, especially on walls.

Nice job on the foundation...that was probably an interesting project. Did you do the foundation yourself? [eek]

Offline mwildt

  • Posts: 373
Re: Panabode
« Reply #10 on: November 28, 2017, 09:36 PM »
Very nice!