Author Topic: Repairing Veneer  (Read 1374 times)

0 Members and 1 Guest are viewing this topic.

Offline JCLP

  • Posts: 625
Repairing Veneer
« on: January 09, 2017, 02:14 PM »
So I was ask by client to do a repair on some veneer that had buckle and cracked. Never done this before, but with a little heat, some glue, playing cards, clamping and lots of patience I was able to make it look better then it was.

Cheers,
JC

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Tim Raleigh

  • Posts: 3386
    • Oakville Cabinetry
Re: Repairing Veneer
« Reply #1 on: January 09, 2017, 03:15 PM »
So I was ask by client to do a repair on some veneer that had buckle and cracked. Never done this before, but with a little heat, some glue, playing cards, clamping and lots of patience I was able to make it look better then it was.

Cheers,
JC

Nice work, what kind of glue did you use?
Tim

Offline tjbnwi

  • Posts: 4682
  • Cedar Tucky Indiana
Re: Repairing Veneer
« Reply #2 on: January 09, 2017, 03:21 PM »
Nice job on the QSWO.

Tom

Offline JCLP

  • Posts: 625
Re: Repairing Veneer
« Reply #3 on: January 09, 2017, 04:01 PM »
So I was ask by client to do a repair on some veneer that had buckle and cracked. Never done this before, but with a little heat, some glue, playing cards, clamping and lots of patience I was able to make it look better then it was.

Cheers,
JC

Nice work, what kind of glue did you use?
Tim

Titebond Hide Glue. It's brown in colour.

Offline JCLP

  • Posts: 625
Re: Repairing Veneer
« Reply #4 on: January 09, 2017, 04:02 PM »
Nice job on the QSWO.

Tom
Thanks Tom.

Offline Billedis

  • Posts: 545
Re: Repairing Veneer
« Reply #5 on: January 09, 2017, 04:44 PM »
That is an awesome job.  Thanks for sharing.  Bill

Offline JCLP

  • Posts: 625
Re: Repairing Veneer
« Reply #6 on: January 09, 2017, 05:12 PM »
That is an awesome job.  Thanks for sharing.  Bill
Thanks Bill. Client likes it as well. Gave me another door to fix.

Cheers,
JC