Author Topic: Kem Aqua Plus Clear sales order numbers  (Read 2186 times)

0 Members and 1 Guest are viewing this topic.

Offline atlr

  • Posts: 108
Kem Aqua Plus Clear sales order numbers
« on: August 02, 2016, 12:41 PM »
UPDATED: Replaced my request for help with the info I found.  thx tjbnwi
I found data sheets and sales order numbers for "SHER-WOOD® KEM AQUA® Plus Water Reducible Clear Finish" here.
http://www.sherwin-williams.com/search/?siteSection=&Ntt=T75F558

Gloss value(measured on black glass):
Gloss 85+ units
 BRE 55-59 units
 MRE 34-38 units
 DRE 17-21

Like Tom said, 5 gallons is typical unit of distribution.  I found a Sherwin Williams branch in Lithia Springs, GA that will pour and ship 1 gallon for about $90.  I ordered a gallon of "dull rubbed effect" today.  http://www.sherwin-williams.com/store-locator/product-finishes-facility/lithia-springs/ga/4302  Tell them Rob Gibson sent you. I don't get anything from referrals.  I am just curious to see if anyone found this useful next time I place an order.

Sales NumberColorSize
650490287BlackDrum
650194202Dull Rubbed Effec1 Gallon
650031024Dull Rubbed Effect5 Gallon
650279375Dull Rubbed Effect53 Gallon Fiber Drum
650031008Dull Rubbed EffectDrum
650112865Medium Rubbed Effect1 Gallon
650011513Medium Rubbed Effect5 Gallon
650011489Medium Rubbed EffectDrum
650194335Bright Rubbed Effect1 Gallon
650030992Bright Rubbed Effect5 Gallon
650279367Bright Rubbed Effect53 Gallon Fiber Drum
650030976Bright Rubbed EffectDrum
650030968Gloss5 Gallon
650279359Gloss53 Gallon Fiber Drum
650030950GlossDrum

Online, I found Kem Aqua Plus White which felt like an achievement. .
http://oem.sherwin-williams.com/products/wood/pigmented-wood-finishes

(2016-AUG-12 UPDATE) Kem Aqua Plus Clear is now listed in the S-W Clear Wood Finishes waterbourne section.
http://oem.sherwin-williams.com/products/wood/clear-wood-finishes

« Last Edit: August 12, 2016, 02:11 PM by atlr »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline tjbnwi

  • Posts: 5705
  • Cedar Tucky Indiana
Re: seeking Kem Aqua Plus Clear decoder ring
« Reply #1 on: August 02, 2016, 02:05 PM »
All of the part numbers for the various sheens are listed on the upper right of the TDS. be aware only MRE comes in gallons, all other sheens and the Sanding Sealer comes in 5 gallon buckets.

There are some commercial stores that can pour off and relabel gallons, they are few and far between.

http://www.woodweb.com/images_forums_public/finishing/KemAquaPlus.pdf

Tom

Offline tjbnwi

  • Posts: 5705
  • Cedar Tucky Indiana
Re: Kem Aqua Plus Clear sales order numbers
« Reply #2 on: August 02, 2016, 11:13 PM »
According to my rep, the Medium is the only one still available in gallon cans. I've talked to a lot of people who use the product and they have been told the same.

Tom

Offline atlr

  • Posts: 108
Re: Kem Aqua Plus Clear sales order numbers
« Reply #3 on: August 03, 2016, 12:04 AM »
I am thankful to have found the S-W commercial branch that I mentioned that will pour off 1 gallon of DRE and ship it to me.  This must be the only situation when the 1 gallon sales number for DRE is used.  Another branch that looked up the 1 gallon DRE sales number for me said that the price and availability fields were blank.

I wonder who uses a drum of Kem Aqua Plus Clear Black. Maybe a piano factory?
« Last Edit: August 03, 2016, 12:09 AM by atlr »

Offline J0hn

  • Posts: 116
Re: Kem Aqua Plus Clear sales order numbers
« Reply #4 on: August 03, 2016, 03:03 AM »
It is my understanding that Kem Aqua Plus is manufactured at a Sherwin-Williams "Product Finishes Facility" and is usually sold by the 5 gallons.  $87.50 is what my local store charges for one gallon but after the first gallon the price drops to $50

This link should show all of these 'facilities' in the US
http://oem.sherwin-williams.com/locations

Offline brewster201

  • Posts: 65
Re: Kem Aqua Plus Clear sales order numbers
« Reply #5 on: August 05, 2016, 05:21 PM »
Hello I'm located in Ontario, Canada and I have a few SW dealers in my area. They will fill gallons. My cost per gallon of Kem Aqua plus is $42 Can

Bruce
« Last Edit: August 05, 2016, 05:24 PM by brewster201 »
Hand Woodworking

Offline RobBob

  • Posts: 1314
Re: Kem Aqua Plus Clear sales order numbers
« Reply #6 on: August 05, 2016, 08:47 PM »
FYI...There's a SW dealer in Dunwoody, not too far from Peachtree Corners.  Did you try the Dunwoody location to see if they would supply smaller batches?
« Last Edit: August 06, 2016, 10:18 AM by RobBob »