Author Topic: Server Speeds  (Read 1376 times)

0 Members and 1 Guest are viewing this topic.

Offline ScottW

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 44
Server Speeds
« on: December 21, 2015, 02:39 PM »
Good afternoon all,

I continue to monitor server speed, and I'm concerned about one key metric that continues to lag behind where I'd like it to be. 

All-in-all, the server has performed quite well today and I'm currently not seeing delays in posting or page loads.  This is simply an effort on my part to stay transparent in regards to our efforts to provide the best user experience for FOG users.

If the server slows to unacceptable speeds, I will need to reboot the server to push the last configuration change.  I'll let you all know as soon as I make that determination.  I'll then work to schedule this outage for an off-peak time (in the next 8 hours or so).

Thank you for your continued patience.
-Scott
« Last Edit: December 21, 2015, 05:02 PM by ScottW »

Offline ScottW

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 44
Re: Server Speeds
« Reply #1 on: December 21, 2015, 03:19 PM »
I'm now seeing extreme slowness on the FOG.  I will need to reboot the fog server so that the new setting can be applied.

I will be rebooting the server at 3:30 PM Eastern Time today.  This will allow for the FOG to be up and running this evening with fewer frustrations.

-Scott

Offline ScottW

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 44
Re: Server Speeds
« Reply #2 on: December 21, 2015, 03:35 PM »
The server has been rebooted.  The final settings changes have been put into place.

Let me know if you see any further issues.

-Scott

Offline bigred00

  • Posts: 25
Re: Server Speeds
« Reply #3 on: December 21, 2015, 03:49 PM »
Warp speed has been restored Captain. It appears the core is now fully operational again.

Seriously though - thanks for all the work. IT can be thankless at times.

Offline Cheese

  • Posts: 2775
Re: Server Speeds
« Reply #4 on: December 21, 2015, 04:03 PM »

Offline Wuffles

  • Posts: 1313
Re: Server Speeds
« Reply #5 on: December 21, 2015, 04:03 PM »
Yep, seems alright again now. Cheers.
Tool list updated to reflect knowledge :: hammer, screwdriver, one pozi bit, and another bigger hammer.

Offline Kevin Ross

  • Posts: 32
Re: Server Speeds
« Reply #6 on: December 21, 2015, 06:02 PM »
Back to normal, thanks for resolving.
Kev