Author Topic: Pinned threads  (Read 10614 times)

0 Members and 1 Guest are viewing this topic.

Offline WPeters

  • Posts: 199
Pinned threads
« on: April 02, 2014, 04:34 PM »
I would like to see all the "pinned" threads be under one tread that we can click on to open up the pinned threads.  How it is now we have to scroll down to see the latest threads because the abundance of pinned threads fills the screen.  Thanks

Offline Brice Burrell

  • Posts: 7170
  • Remodeling Contractor
    • The Green and Dark Blue blog
Re: Pinned threads
« Reply #1 on: April 02, 2014, 08:27 PM »
I would like to see all the "pinned" threads be under one tread that we can click on to open up the pinned threads.  How it is now we have to scroll down to see the latest threads because the abundance of pinned threads fills the screen.  Thanks

I asked about this some time ago, maybe now we can get a little traction on this issue??
Check out my new blog, The Green and Dark Blue Blog.

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8232
    • Festool USA
Re: Pinned threads
« Reply #2 on: April 02, 2014, 08:37 PM »
Not sure where you're seeing it push all of the new threads off the page. The most pinned threads is in the Festool Tools & Accessories board and pinned threads were about half way down the page. I've unpinned all of the "Consolidated Q&A for <insert tool>" threads and unpinned some obsolete threads. Hope that helps. If not, give me a link to the page where you're seeing it.

I generally just use the unread posts link at the top of the page or the recent posts on the home page.

Shane

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 10482
  • Let's Redux / Revive / Rewind / Rollback the FOG!
Re: Pinned threads
« Reply #3 on: April 02, 2014, 09:01 PM »
Shane was unpinning at the same time I unpinned a few.  Before we started there were probably less than 70 pinned threads here out of the almost 24,500.  Now there are less than fifty I believe.  No more than 6 on any Board.

Peter
Scraps to Smiles.  To be continued.....  Stay Tuned.

Offline WPeters

  • Posts: 199
Re: Pinned threads
« Reply #4 on: April 03, 2014, 12:40 PM »
I was referring to the Festool tools and accessories board.  Its much better now.  Thanks for that and all the great work you do with the Forum!