Author Topic: FOG Forum Video Contest - Official Thread - Enter by Jan 20th, 2014! (Read 95300 times)

Festool USA · « **Reply #30 on:** January 08, 2014, 12:40 PM »

Ok, come on guys, I'm trying to give away $1500USD worth of Festool here in the US/Canada and $1000AUD down under. Where are all the videos?!

I will say that Festool Australia in particular will be using this to gauge whether to participate in further FOG contests, so participation is key.

Shane

PaulMarcel · « **Reply #31 on:** January 08, 2014, 05:51 PM »

Quote from: Shane Holland on January 08, 2014, 12:40 PM

Ok, come on guys, I'm trying to give away $1500USD worth of Festool here in the US/Canada and $1000AUD down under. Where are all the videos?!

I will say that Festool Australia in particular will be using this to gauge whether to participate in further FOG contests, so participation is key.

Shane

It's like a big project in college: you only start 36 hours before it is due. The flood will start January 19th. And, yeah, that's a LOT of cash!

Untidy Shop · « **Reply #32 on:** January 10, 2014, 01:13 AM »

Quote from: PaulMarcel on January 08, 2014, 05:51 PM

Quote from: Shane Holland on January 08, 2014, 12:40 PM
Ok, come on guys, I'm trying to give away $1500USD worth of Festool here in the US/Canada and $1000AUD down under. Where are all the videos?!

I will say that Festool Australia in particular will be using this to gauge whether to participate in further FOG contests, so participation is key.

Shane

It's like a big project in college: you only start 36 hours before it is due. The flood will start January 19th. And, yeah, that's a LOT of cash!

Shane I can understand your nervousness, I thought there would be more in by now, but Paul is right it will all start happening by 19th. I have three in production and hope to post them next week.

To my fellow Australians, come on $1000.00 towards your next purchase is substantial! Do not be

As for any possible excuses by others -

"The Dog ate my I Pad.

It is sub zero in my workshop this week (NAmerica)

It is C40 in my workshop (Australia)"

Edit.
Festool Australia could also promote this comp, but they do not appear to have done so on their website.

jonny round boy · « **Reply #33 on:** January 10, 2014, 02:15 AM »

I think there will be more entries coming - with competitions like this, there tends to be an increase in entries as the deadline approaches.

Locky · « **Reply #34 on:** January 10, 2014, 03:25 AM »

I've got one in the pipeline just figuring out how to edit,I think some people don't want to get behind the camera, but I can't understand why especially in aus. This forum only has a few members down here so the possibility of winning $1000 of festool tools is very high. I bet all the aus members entered everyday for the last contest festool aus did and only one of us got anything.
This video contest is like being at school again, everyone one will do the assignment the night before

TheTassieBFG · « **Reply #35 on:** January 10, 2014, 06:41 AM »

uni assignment out of the way.... check
idea of what to do.... check
camera with video capability check (sort of)
time to make a video... doing my darndest have some hope now.

time will tell

Festool USA · « **Reply #36 on:** January 15, 2014, 10:05 AM »

Ok, fellas. We're down to less than a week remaining. Time to get those videos finished up and posted!

You don't have to be an expert with the tools or with a camera to enter. Even sharing a basic how-to is an eligible entry. And even easier is a testimonial.

Thanks to all who have posted already. Good luck to all!

Shane

Peter Parfitt · « **Reply #37 on:** January 15, 2014, 10:17 AM »

Hi Shane

Are you going to put links to all of the contest entries on this or one single thread to make it easier to find them?

Peter

Festool USA · « **Reply #38 on:** January 15, 2014, 10:36 AM »

Come on, Peter, you should be reading and memorizing every thread...

Peter Parfitt · « **Reply #39 on:** January 15, 2014, 12:09 PM »

Thanks Shane.

There are some great videos there and some talented individuals. This sort of competition always brings out the best.

For anyone a little worried about entering - do give it a go. I have learnt something from every single video that I have watched - it might be good woodworking advice, a new technique, an interesting point of view or some interesting video work.

Peter

Festool USA · « **Reply #40 on:** January 17, 2014, 02:34 PM »

Only three days remain, including a weekend. Your window of opportunity is closing. I have to say that I expected more participation. I think the last video contest we did on the FOG product about 30-40 videos. What's up...?

PaulMarcel · « **Reply #41 on:** January 17, 2014, 03:34 PM »

Quote from: Shane Holland on January 17, 2014, 02:34 PM

Only three days remain, including a weekend. Your window of opportunity is closing. I have to say that I expected more participation. I think the last video contest we did on the FOG product about 30-40 videos. What's up...?

...and the prizes are bigger and moe betta this time!

jmbfestool · « **Reply #42 on:** January 17, 2014, 03:58 PM »

Quote from: PaulMarcel on January 17, 2014, 03:34 PM

Quote from: Shane Holland on January 17, 2014, 02:34 PM
Only three days remain, including a weekend. Your window of opportunity is closing. I have to say that I expected more participation. I think the last video contest we did on the FOG product about 30-40 videos. What's up...?

...and the prizes are bigger and moe betta this time!

Where's your vid?

Festool USA · « **Reply #43 on:** January 17, 2014, 04:01 PM »

Quote from: jmbfestool on January 17, 2014, 03:58 PM

Quote from: PaulMarcel on January 17, 2014, 03:34 PM
...and the prizes are bigger and moe betta this time!

Where's your vid?

He can't participate this time because he is considered a Festool affiliate. However, we now have a relationship with Paul-Marcel and have worked with him to produce other video because of his video submission in one of our contests several years ago. Think about it, one of you could be the next, hold on, wait for it.... PAUL-MARCEL.

Peter Parfitt · « **Reply #44 on:** January 17, 2014, 04:55 PM »

Quote from: Shane Holland on January 17, 2014, 04:01 PM

He can't participate this time because he is considered a Festool affiliate. However, we now have a relationship with Paul-Marcel and have worked with him to produce other video because of his video submission in one of our contests several years ago.

Think about it, one of you could be the next, hold on, wait for it.... PAUL-MARCEL.

Hi Shane,

For a start, my house is not big enough for more than one Paul Marcel to stay in 2015...

and second, do we then have 1" shy, followed by 2" shy - by the time everyone gets in on the Paul Marcel act we will have 1/2 mile shy (sounds like a pilot I know - his avatar has him sitting in the driving seat of his chopper!).

Peter

Stoli · « **Reply #45 on:** January 17, 2014, 05:27 PM »

Considering that he is now a "Festool Associate", I would have expected his tag line to have changed to "13mm Shy"

PaulMarcel · « **Reply #46 on:** January 17, 2014, 05:39 PM »

Quote from: Stoli on January 17, 2014, 05:27 PM

Considering that he is now a "Festool Associate", I would have expected his tag line to have changed to "13mm Shy"

haha, I was just thinking that a UKer should fill the metric slot

GarryMartin · « **Reply #47 on:** January 17, 2014, 06:04 PM »

Quote from: Stoli on January 17, 2014, 05:27 PM

Considering that he is now a "Festool Associate", I would have expected his tag line to have changed to "13mm Shy"

Tsk. Trust an American to convert inches to mm incorrectly. Surely you mean "12.7mm shy"?

Stoli · « **Reply #48 on:** January 17, 2014, 06:10 PM »

Now you're just arguing significant figures...

Of course, I don't know how many people noticed my original post had 12mm, which I had to edit to 13mm.

GarryMartin · « **Reply #49 on:** January 17, 2014, 06:12 PM »

Quote from: Stoli on January 17, 2014, 06:10 PM

Of course, I don't know how many people noticed my original post had 12mm, which I had to edit to 13mm.

LOL!

I missed that. Even better.

erock · « **Reply #50 on:** January 17, 2014, 08:20 PM »

Well….let me get in on this action!!!

Here is my video entry…..Just a quick simple video of how I'm using the TS55 to achieve glue ready edges on Mahogany for my raised panel doors.

http://www.youtube.com/watch?v=HIevKhU31eM&feature=youtu.be

Eric

h.gil · « **Reply #51 on:** January 17, 2014, 08:52 PM »

How many entries so far? I'll see if I can take video tomorrow at site, I don't want to be the weird guy though.

erock · « **Reply #52 on:** January 17, 2014, 08:57 PM »

Quote from: h.gil on January 17, 2014, 08:52 PM

How many entries so far? I'll see if I can take video tomorrow at site, I don't want to be the weird guy though.

The weird guy??? Who cares what your co-workers think when you tell them you won!!! How bad do you want $500 festoolbucks?

Eric

Festool USA · « **Reply #53 on:** January 17, 2014, 09:37 PM »

So far, about 10 entries in the US/Canada. Pretty good odds.

h.gil · « **Reply #54 on:** January 17, 2014, 10:09 PM »

Quote from: erock on January 17, 2014, 08:57 PM

Quote from: h.gil on January 17, 2014, 08:52 PM
How many entries so far? I'll see if I can take video tomorrow at site, I don't want to be the weird guy though.

The weird guy??? Who cares what your co-workers think when you tell them you won!!! How bad do you want $500 festoolbucks?

Eric

I wish I had co-workers so they could hold the phone for me. I mean other trades, I would be weirded out by the guy talking to himself all alone.

Quote from: Shane Holland on January 17, 2014, 09:37 PM

So far, about 10 entries in the US/Canada. Pretty good odds.

So some swag is still available? nice

Festool USA · « **Reply #55 on:** January 17, 2014, 10:15 PM »

The economy must be doing a lot better than I thought. I can't even give away free Festool anymore. Dang!

Untidy Shop · « **Reply #56 on:** January 18, 2014, 06:26 AM »

Quote from: erock on January 17, 2014, 08:20 PM

Well….let me get in on this action!!!

Here is my video entry…..Just a quick simple video of how I'm using the TS55 to achieve glue ready edges on Mahogany for my raised panel doors.

http://www.youtube.com/watch?v=HIevKhU31eM&feature=youtu.be

Eric

Clear and precise, good luck.

Bikeboy80 · « **Reply #57 on:** January 18, 2014, 06:32 AM »

I'm working on my two entries today, with any luck I should have them up tonight.

guyswoodshop · « **Reply #58 on:** January 18, 2014, 11:32 AM »

Quote from: Shane Holland on January 17, 2014, 10:15 PM

The economy must be doing a lot better than I thought. I can't even give away free Festool anymore. Dang!

You can send me all the free Festool tools you want. Need my home address?

h.gil · « **Reply #59 on:** January 19, 2014, 02:43 AM »

Count me in!

http://festoolownersgroup.com/festool-how-to/ts-55-for-kitchen-cabinet-installation-contest-entry/