Pages: [1]   Go Down
  Print  
Author Topic: made in china  (Read 763 times)
0 Members and 1 Guest are viewing this topic.
Charimon

Offline Offline

Location: Omaha NE
Member Since: Jun 2008
Posts: 652


Tool and Tile Junkie


« on: February 06, 2010, 05:04 AM »







on http://www.contractortalk.com/f11/opps-72716/  there is a thread about a appt building in china that fell over
thot it would be fun to let you all see it too

Craig

If you think about it the building must be well built to still be together like it is.
Logged

"The existence of the flame thrower proves that at one time, somewhere, somebody said, " You Know, There's a group of people over there that I'd like to set on fire right now but they're too far away."
woodshopdemos
Inactive Member
*
Offline Offline

Location: Hope, RI
Member Since: Jan 2007
Posts: 759


WWW
« Reply #1 on: February 06, 2010, 08:24 AM »

The tenants in the other two building must be a skosh appprehensive.
Logged

In memory of John Lucas (1937 - 2010)
Michael Kellough

Offline Offline

Location: UNITED STATES (US)
Member Since: Jan 2007
Posts: 1908

Southern New York


« Reply #2 on: February 06, 2010, 03:42 PM »

Just because someone is willing to pay you to do something doesn't mean you should do it.
I doubt the building engineers expected the foundation to be deliberately undermined.  Eek!
Logged
Pete Pedisich

Offline Offline

Location: LI NY USA
Member Since: Jan 2007
Posts: 187



« Reply #3 on: February 06, 2010, 04:57 PM »

Sure held together well on it's trip down.
Logged
Kevin D.

Offline Offline

Location: Greater Toronto Area
Member Since: Nov 2009
Posts: 615



« Reply #4 on: February 07, 2010, 06:10 AM »

Sure held together well on it's trip down.


Pete,
I thought the same.  In fact, it held together so well it almost seems fake.

Joe


I thought the same as well.  But I did go to the link in a previous post, and these shots really show that it really happened.....unless of course some really ingenious fellow is THAT GOOD at faking photos of course.  The dangling footings says it all...I think?

EDIT:  Can't seem to attach images. (need a tutorial on how-to for this I guess)  Sad

Just go to the previous link http://www.contractortalk.com/f11/opps-72716/ and take a look at the shots of the dangling footings from the other perspective.  (The previous shots in the post are of the top of the building, except the first shot.)  You really ascertain it better in another shot which is a better close-up shot of the base of the building.

Chinese engineering and construction.  There's a reason we don't just transfer their credentials to our country when immigrate here (Canada or US) without extensive re-education.  I know I don't want "WalMart standards" collapsing around me.  Scared
« Last Edit: February 07, 2010, 06:32 AM by Kevin D. » Logged

TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus,  MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Hat, Festool T-Shirt (2), Festool Floor Mat, Festool Stein.

Wish List:  Kapex, and more sanders.
harry_

Offline Offline

Location: Middleton, NH
Member Since: Nov 2009
Posts: 1067



« Reply #5 on: February 07, 2010, 09:31 AM »

Here in the states I would find it hard to believe that anyone would even attempt to do underground parking in that manner on a 'new building'. Afterall, it is SO much easier to do that kind of excavation without a building in the way.

Yeah sure, we do things like that on existing buildings, but on something that new?..... Seriously, I just dont see it happening here in the states. Probably for the reasons pictured above.

Seems a lot like putting the cart before the horse to me  Big Grin
Logged

Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).
Steve Rowe

Offline Offline

Location: Russellville, AR
Member Since: Jan 2007
Posts: 327



« Reply #6 on: February 07, 2010, 10:20 AM »

Maybe it was constructed in the same manner as the Chinese plywood shown below.  Overlapping walls may significantly improve the strength.  Perhaps, I should give the Chinese ply a second chance. Shocked


* DSC01157.jpg (14.9 KB, 448x336 - viewed 115 times.)

* DSC01156.jpg (10.78 KB, 448x336 - viewed 111 times.)

* DSC01158.jpg (68.09 KB, 1024x768 - viewed 107 times.)
Logged
Rey Johnson

Offline Offline

Location: Pittsburgh, PA
Member Since: Aug 2007
Posts: 392


Fine Sawdust Maker


WWW
« Reply #7 on: February 07, 2010, 10:21 AM »

I half expected to see a lone guy on the crapper who got pranked by a lifted building.
Logged

TS55|AT65|TDK15.6|OF1400|PS300|RO150E|MFS700|MFS400|FS2700|FS1400|FS1080|FS800|MFT3(2)|MFT1080(2)|MFT800(2)|CT33E(2)|Kapex|RS2E|ETS150/3|Domino
Chris Hughes

Offline Offline

Location: Kalamazoo, MI, USA
Member Since: Mar 2008
Posts: 562



« Reply #8 on: February 07, 2010, 05:34 PM »

As a trim carpenter, I can appreciate the for thought and extra effort the general contractor went through to make it a little easier to do the crown mouldings without the use of a schaffold.  They will have to flip the building over a few more times however.  Those Chinese guys think of everything
Logged
WarnerConstCo.

Offline Offline

Location: Auburn, In usa
Member Since: Apr 2008
Posts: 3124



WWW
« Reply #9 on: February 07, 2010, 07:53 PM »

Who really digs a parking garage after the building is up?

If they got some big cranes I think you could just set it back in place.

I don't even see any broken glass.
Logged

Kevin D.

Offline Offline

Location: Greater Toronto Area
Member Since: Nov 2009
Posts: 615



« Reply #10 on: February 07, 2010, 09:26 PM »

Certainly seems that they should have known better. Quote from Wiki:

The vast majority of Shanghai's 6,218 km2 (2,401 sq mi) land area is flat, apart from a few hills in the southwest corner, with an average elevation of 4 m (13 ft).[23] The city's location on the flat alluvial plain has meant that new skyscrapers must be built with deep concrete piles to stop them sinking into the soft ground. The highest point is at the peak of Dajinshan Island at 103 m (340 ft).[24] The city has many rivers, canals, streams and lakes and is known for its rich water resources as part of the Taihu drainage area.
[/i]

Logged

TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus,  MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Hat, Festool T-Shirt (2), Festool Floor Mat, Festool Stein.

Wish List:  Kapex, and more sanders.
Pages: [1]   Go Up
  Print  
 
Jump to: