Author Topic: Chisel protection - Old belt + masonry line = perfect fit!  (Read 4256 times)

0 Members and 1 Guest are viewing this topic.

Offline grobkuschelig

  • Posts: 172
Hi there,

I quickly wanted to share this, since I am quite happy how it turned out.

I have been getting a little into hand tools and so, for a test, I bought my first two chisels recently.
I wanted smaller ones, for better handling, which has proven to be a good choice.
I opted for different manufacturers, to test the differences.
- Narex short chisel Wood Line Plus, 26mm
- MHG "short" chisel, 12mm

The MHG came with a small plastic "edge protector", the Narex came without.
Since I am always quite clumsy, I know I need some form of Protection...  [wink]

I first thought about making a tool roll out of an old piece of leather that I have lying around. But since I don't know, how much my chisel collection will grow, it might not be the right time for such a thing.
So I opted for single sleeves.

Used an old leather belt, that had spent it's belt-years and was sitting around retired, waiting to be put to use.
Cut small pieces, used the belt punch pliers to put holes in and some cords (One piece of something I found, for the second one masonry line).

As mentioned above, I like them a lot.

Somehow, this forum inspires me more and more to try and find my own solutions for my "problems" rather than buying solutions.
...unless the solution is a new festool, obviously. But I just could not justify a Vecturo for this...   [cool] [big grin]


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline PreferrablyWood

  • Posts: 868
Re: Chisel protection - Old belt + masonry line = perfect fit!
« Reply #1 on: March 18, 2017, 03:45 AM »
Holy Leather that looks good, the red kord makes them more visible and is a refined touch too. I've some leather work, something I could pull off. Thanks for showing! Funny you should mention the Vecturo as it's a tool that does some of the same things you can do with a chisel..
850 HL E Planer rustic head standard head angle fence, MFS 400x2, MFS extensions MFS VB 700 x 1 MFS VB 1000 x 2 . CMS GE, sliding fence, VB and 2x VL extension tables, OF 2200, Accessory Set ZS OF 2200 M,36mm 5m antistatik hose, CMS OF+ CMS TS 75 insert modules. SYS-MFT Fixing-Set,  3.5m sleeved hose, Syslite duo, Sys 4 sort 3 x3, Sys Roll, Sys 1 Box x2 , classic Sys 3-Sort 4, classic Sys 3 Sort 6 x2, Sys Cart x3 Systainer 4 x2  as toolbox with selfmade inserts Systainer 5 as toolbox with insert.
Festool 18V HKC 55 Li 5.2 EB Plus FSK 420,FSK 250, Extra blade for the HKC 55 W32.TI 15, CXS 2.6 Ah version, RO 90 DX, PDC 18/4 plus DC UNI FF depth stop chuck,AD 3/8 square socket holder FF chuck, Centrotec Bits; -->Bit holder and bit selection BHS 65 CE TL 24x, ,Bradpoint DB WOOD CE SET ,Zobo (Forstner) D 15-35 CE-Zobo SET ,Masonary/stone bits DB STONE CE Set,Extender BV 150 CE, Countersink QLS D2-8 CE Hook turner HD D18, end centrotec<--.  TS 75 EBQ, PSC 420, OF 1010, RS 300 EQ, CTL Midi, MFT 3, Parf dogs x2pair +Bench dogs x2pair, FS 1080, FS 1900 .  will get Domino DF 700 XL,  CMS insert BS 120 Belt sander.

Offline demographic

  • Posts: 322
Re: Chisel protection - Old belt + masonry line = perfect fit!
« Reply #2 on: April 08, 2017, 04:03 AM »
Site worker here so I do use the chisel edge protectors for when they go into the toolbox.
I usually just put the protectors in my back pocket when I'm using the chisel but sometimes I lose one...

I have a little tub of plastic grains called Polymorph.
Just drop about a teaspoon of Polymorph into a cup of fresh boiled water and stir it about till it clumps together and goes clear.
Remove from the hot water and mold it flat then fold it around the end of the chisel and when it cools you have a new chisel protector.

Don't like the shape you made? Put it back in the water and when its gone clear (hot enough to mold) make it into another shape.

Its worth just making a decent sized lump to keep in your toolbox just so you have something to make random plastic things out of. Handy stuff.

Offline grobkuschelig

  • Posts: 172
Re: Chisel protection - Old belt + masonry line = perfect fit!
« Reply #3 on: May 23, 2017, 03:55 AM »
Hi
I just thought I'd post a quick update.
After acquiring a couple of additional chisels, I opted for a "color coding" based on chisel width. Works great to be able to quickly grab the right one.
And for the small ones, you can even repurpose the part of the belt where the holes are...

I'm quite happy how this turned out. [emoji4]

Offline ear3

  • Posts: 3404
Re: Chisel protection - Old belt + masonry line = perfect fit!
« Reply #4 on: May 23, 2017, 07:31 AM »
 [thumbs up]  How does this affect storing them, btw?
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline grobkuschelig

  • Posts: 172
Re: Chisel protection - Old belt + masonry line = perfect fit!
« Reply #5 on: May 25, 2017, 06:05 PM »
I don't have many hand tools and try to have all my tools organized in Systainers for easy carry.
I have a Systainer that holds my planes and I just throw the chisels in there. Have not had any damage or dulling of the blades.
I even think the sharpness might benefit from the "leather strap" enclosure. But the effect might only be imaginary. [emoji56][emoji51]