Author Topic: Remember the Bahco 8032 chisels?  (Read 1550 times)

0 Members and 1 Guest are viewing this topic.

Offline Lemwise

  • Posts: 187
Remember the Bahco 8032 chisels?
« on: November 24, 2016, 03:48 PM »
One of the great features was that they lay completely flat. Sadly they were discontinued a long time ago but then I saw the new HDC chisels from Hultafors which also lie completely flat. I've ordered the 32 and 40mm versions.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Frank-Jan

  • Posts: 917
  • Dutch Canadian living in Belgium
Re: Remember the Bahco 8032 chisels?
« Reply #1 on: November 24, 2016, 05:48 PM »
I had never heard of these chisels, thanks for sharing!

Offline Spiff

  • Posts: 107
Re: Remember the Bahco 8032 chisels?
« Reply #2 on: November 24, 2016, 11:58 PM »
Out of interest, what applications do you find the flatness useful for?

If you're paring (plugs that cover screw heads for example) I can highly recommend cranked chisels, as these make life even easier, and reduce the chance of bruising the work piece when you strike the chisel.  They also make it easier to achieve a totally flat cut.



And at this point I'll give a shout out for some old established companies that still make amazing chisels, the proper way - hand forged from Sheffield steel, not mass produced by a robot from junk metal.  I own examples from these companies and they're beautiful heirloom quality tools that hold an amazing edge.  We need to actively support companies like this or they'll be lost forever, drowned by cheap far east disposable tat  [sad]

Here are the links:

http://www.crownhandtools.ltd.uk/index.html

http://www.henrytaylortools.co.uk

also excellent are
http://www.robert-sorby.co.uk

 8)  8)  8)
« Last Edit: November 25, 2016, 12:05 AM by Spiff »

Online McNally Family

  • Posts: 362
  • Festool Atomic Phaser Particle Blaster (APPB Set)
Re: Remember the Bahco 8032 chisels?
« Reply #3 on: November 25, 2016, 01:56 AM »
Thank you for the links.....
GREEN: In order of purchase = C18 5.2 Set w/Centrotec Installer's Set | CT26 w/Installer Cleaning Set | CT Wings | SYS-MFT | RS 2 E | Hose w/ Sleeve 3.5m | metric+imperial ZOBO bit sets | Centrotec Stubby Brad Point Bit Set 3-8mm |  HSS D3-10 CE/10x Metric Twist Drill Bit Set | 115mm X 226mm Hand Sanding Block | 80mm X 133mm Hand Sanding Block | HSK D21.5 5m hose | CT Boom Arm Bundle Set |  Won the CXS Li 2.6 90 Limited Edition on 06/20/2016 | Metric Parallel Guide Set | 1080 Plate for custom MFT | Clamping ElemenTS (1) | Quick Clamps For MFT (2) | Festool 300mm Screw Clamps set (1) | Festool 120mm Screw Clamps set (1) | Next  Purchase: Something else Metric |

RED: In order of purchase = Mafell P1cc w/tilting base | Complete range of Mafell blades | Collins Coping Foot |  F 160 (x1)+F 110 (x1)+F 80 (x1) w/Guide pocket, clamps & Connector (x1)  | Angle fence F-WA | Next Purchase :  TBD

Offline Lemwise

  • Posts: 187
Re: Remember the Bahco 8032 chisels?
« Reply #4 on: November 26, 2016, 04:48 PM »
Today I received the chisels and the quality is good, certainly well above that of lets say a Stanley Fatmax chisel. The chisels are fairly heavy but that's a result of the tang going all the way through the handle. The backs on both chisels have a slight hollow in the middle but it doesn't extend to the edges (like a Japanese chisel but the hollow is a bit smaller). That's exactly the way I like it because it speeds up sharpening and I'll only be using them for flushing operations anyway. As for the steel, there's no documentation on what it used. Going by how it sharpens and the edge it takes I'd say it's a high carbon steel around 60HRC.

Offline Lemwise

  • Posts: 187
Re: Remember the Bahco 8032 chisels?
« Reply #5 on: December 05, 2016, 05:01 PM »
Just a quick update on the chisel. First of all I was completely wrong about the steel. It's actually chrome vanadium hardened to 58-59HRC. It's sharpens easily but it also dulls very quickly. These chisels are really only good for rough work when a dull or sharp edge doesn't make a difference. Like when a piece of wood is in the way and I have to remove it fast. I will say these chisels can take a heavy beating.