Author Topic: Forays into order and chaos...  (Read 9517 times)

0 Members and 1 Guest are viewing this topic.

Offline six-point socket II

  • Posts: 543
  • aka @the_black_tie_diyer
Re: Forays into order and chaos...
« Reply #30 on: February 06, 2018, 04:44 AM »
That wire looks strangely familiar...  [big grin] [big grin] [big grin]

Good on your part to replace it!

Scrap storage looks practical as well!

Kind regards,
Oliver
Kind regards,
Oliver

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #31 on: February 06, 2018, 03:53 PM »
Thanks.
Here is a picture with the storage in use:


Needs some further tweaking but so far I am happy.

Today’s little project was to clean up my heirloom dead-blow Hammer. This thing has served the family for decades and I now bought a couple of new faces and have cleaned the head. Needs a coat of something, but I can’t decide if I should go for the original colored/hammered or a clear coat to show of the nice „history the hammer has accumulated.

Any suggestions?



Somehow I only remember ever seeing this thing with the beat-up Hammer faces. [emoji51]

Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #32 on: February 26, 2018, 04:28 PM »
Blimey. I fell under a big rock of cough and flu.

Am only slowly starting to surface again. But I managed to finish the heirloom hammer.
So here it goes.

It is nice to work with the old tools from my ancestors. And also the fact that you are actually able to make such a used tool look like new again is what I love about tools im general. They just keep on giving if you let them...


Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8335
  • Finger Lakes Region, NY State , USA
Re: Forays into order and chaos...
« Reply #33 on: February 26, 2018, 11:09 PM »
I did a similar rack  many years ago. It has been really good to have. You will like having one. Can't ever be big enough though.




Seth

Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #34 on: March 16, 2018, 03:02 PM »
Posted this in the attic storage thread already, but I am so happy with my drill attics finally filled, that I can’t keep myself from putting it up here as well.

Here they are:


I really enjoy the Festool brad point bits. They leave a clean cut and the sets I got were real cheap.
I thought a lot about if I should put out the money for the bit sets (Philipps, Pozi, Torx) but since they were only 20 Euros each, I figured it would be more expensive to try and get empty holders to fill up with something else..

If only Fein did a Systainer in orange with an attic in the lid, I‘d be the happiest Attict in the world. [emoji51]
Sorry. My humor is sub-par sometimes.

Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #35 on: March 16, 2018, 03:12 PM »
While shopping, I also filled up the remaining spots in my Bessey Clamp Systainer.

Looks like my order is really making progress...


Offline six-point socket II

  • Posts: 543
  • aka @the_black_tie_diyer
Re: Forays into order and chaos...
« Reply #36 on: March 17, 2018, 10:55 AM »
Looks great!

Kind regards,
Oliver
Kind regards,
Oliver

Offline HarveyWildes

  • Posts: 716
Re: Forays into order and chaos...
« Reply #37 on: March 17, 2018, 11:53 AM »
Blimey. I fell under a big rock of cough and flu.

Am only slowly starting to surface again. But I managed to finish the heirloom hammer.
So here it goes.

It is nice to work with the old tools from my ancestors. And also the fact that you are actually able to make such a used tool look like new again is what I love about tools im general. They just keep on giving if you let them...

I'm just getting over two weeks of sinuses (mysteriously without much of a cough) and fatigue.

Nice work on the hammer.  My dad was notoriously non-handy, so no tools from him, but I have an old, wooden handled screwdriver from my grandfather that gives me the same feeling when I hold it - this is the third generation of utility.  I can't say that for my computer.

Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #38 on: April 13, 2018, 05:53 PM »
@HarveyWildes, yes. True words about the comparison between tools and computers.

I get so much more satisfaction these days from hand crafting anything. Even more with nice tools, and best with some heritage tools that enable me to remember my ancestors and how they worked with the same tool. :)

Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #39 on: April 13, 2018, 05:59 PM »
....although I have to say that I have been recently shopping around A LOT. [emoji33]

I decided to finally get the „a little bit more than extended base set“ of tools I had been craving for and have splurged for some nice things.

Latest purchase arriving today was the KV-SYS D8 which seems nice. Hope to try it next week.
In addition I got the Bluetooth remote for the CT and some consumables.

...and the nice Wiha Special Edition pink screwdrivers for the lady. I made her a mini-sys set in pink/grey some time ago and these are just the perfect addition. [emoji51]

Will post some more about my recent tool additions soon. I am unbelievably happy with the stuff I got because it really proves to fill the missing spots...


Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #40 on: April 14, 2018, 02:27 PM »
The one for the Lady!

A while ago, when I saw the pink mini-Systainer, I got a couple for the Mrs. to get her tools into a nice ladylike home.
She appreciates my Systainer stacks, since they help build and fix stuff on the honey-do-list.

When I saw the pink Wihas, I knew this would be the perfect addition.
Unfortunately the Wiha set is limited to 3 screwdrivers (normal 0.8x4, PH 1&2). So not covering the complete range for a household...

But I have to say, they seem good quality and certainly look the part. :)

Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #41 on: April 18, 2018, 08:20 PM »
I have been wanting a belt sander or large disk sander for some time now. But I am too cheap to try and get something new and have too many other projects preventing me from building something.

So anytime I need to sand small things, it is back to my trusty sander for any application, the RO150. What a godsend this thing proves to be, time and time again. :)


Offline leakyroof

  • Posts: 2136
Re: Forays into order and chaos...
« Reply #42 on: April 19, 2018, 09:16 AM »
Also a quick tip in between!

For anyone with a Kapex KS-60 (might work with others):
I found the perfect stop block for the quick, short cut. A Bessey DuoKlamp 160-8.
Goes on quick and holds nice and fast. Your cut length is fairly limited by geometry, but when the stars align, it works flawlessly.


   I love my DuoKlamps....  They have just enough clamping strength in either direction for many tasks, but are lightweight as well.  My often 'first' grab clamp choice in my shop, esp. if I need to disassemble something like a chair joint for regluing.
Not as many Sanders as PA Floor guy.....

Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #43 on: April 28, 2018, 12:58 PM »
In my quest to optimize drill storage I went ahead and butchered my CXS charger.
In its original shape, it did not fit into the SYS-1 with attic lid.

I chopped of the upper part with a hacksaw, melted it in my oven at 220°C and mushed it into the open spots. Glued in with plastics glue. Seems to work and fits perfectly, the Frankencharger. ;)


Offline grobkuschelig

  • Posts: 312
Re: Forays into order and chaos...
« Reply #44 on: May 02, 2018, 04:16 PM »
So I just took possession of my newest Festool:
Got a brand spanking new RTSC 400 and can’t wait to use it. Unfortunately, the sanding sheets for it are still in the mail, so it will be tomorrow or the weekend.

Looks nice, though. I‘m in love. [emoji7]

Hope to be able to use it to finally finish off the many little odd jobs I could never be bothered to setup my outdoor workstation for. Sanding here and there in between with bag and battery...


Offline leakyroof

  • Posts: 2136
Re: Forays into order and chaos...
« Reply #45 on: May 02, 2018, 08:35 PM »
So I just took possession of my newest Festool:
Got a brand spanking new RTSC 400 and can’t wait to use it. Unfortunately, the sanding sheets for it are still in the mail, so it will be tomorrow or the weekend.

Looks nice, though. I‘m in love. [emoji7]

Hope to be able to use it to finally finish off the many little odd jobs I could never be bothered to setup my outdoor workstation for. Sanding here and there in between with bag and battery...


. Give us an in-depth review of it once you’ve spent some time using it.
Not as many Sanders as PA Floor guy.....