Author Topic: Replacing garage doors - DIY or contract out?  (Read 1490 times)

0 Members and 1 Guest are viewing this topic.

Offline ryanjg117

  • Posts: 110
Replacing garage doors - DIY or contract out?
« on: April 11, 2018, 02:05 PM »
We need to replace two ancient garage doors in our 1977 tri-level home. Only one had a door-opener, and it's a vintage Chamberlain unit that doesn't even have a wireless remote (just a wired button).

Because of a large wood beam that supports the upstairs that runs along the ceiling of the garage, a traditional ceiling mounted opener won't work - I will need to use a jackshaft opener like the LiftMaster 8500. Pricier but they seem to have decent reviews.

The doors are 9' wide by 7' high, uninsulated. Since this is not my workshop (I have a detached shop elsewhere on the property), I don't really care about keeping the garage heated, so I'm fine with replacing them with more modern but still uninsulated doors.

My questions is really around whether to do this myself (to save some money) or hire a professional garage door contractor. I received a quote months back to replace both doors and install a jackshaft opener on one door, for around $2,000. When looking around at the big box stores, it seems that just my material cost (for two quality doors and one opener) doesn't leave me much room for actual savings. Am I looking at the wrong places? Where would you look for doors and openers if you were going to do this yourself, on the cheap?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline justaguy

  • Posts: 158
Re: Replacing garage doors - DIY or contract out?
« Reply #1 on: April 11, 2018, 02:26 PM »
12 years ago I replaced two 9x7 insulated doors with new tracks and openers in a day by myself. Those doors did not have torsion springs. It was not that hard. A few years ago I moved and I contracted out the doors this time.

If you have a room over the garage or the interior wall is common with a frequently occupied living space get the insulated doors. The energy savings and noise reduction are worth the cost. In addition, an insulated door finished on both the inside and out are less prone to getting dented.

Last point. I have the LiftMaster 8500 and so far I have no complaints. It's quiet and reliable. If you get the backup battery they only last about 5 years but replacement is a DIY project and the batteries at available at the big box stores.

Offline Master Carpenter

  • Posts: 81
Re: Replacing garage doors - DIY or contract out?
« Reply #2 on: April 11, 2018, 03:32 PM »
If I was going to do it myself, on the cheap, I'd look on Craigslist. It's where I got my 12'x8' insulated door for $150. I could have added the opener for an extra $100, but don't like the lack of security of a powered opener(my door is locked with a padlock on the rails). It took a couple hours to install, but my rails were complicated by where I placed my lights.

If you don't want to buy used, call the install companies and ask for quotes with both supply only and installed prices. They may not want to supply only, but it doesn't cost to ask.
Ts 55, Ts 75, of 1010, lr 32, mft, mfs 700, RO 150 x2 + paper asort, RO 90 + paper asort, pro 5, df 500 + dom asort, hl 850 e, ti 15, t18, cxs, centrotec set, ct48, ct sys, vac sys, 32;55x2;118 tracks, a stack of sys and an og festool first aid kit. Kapex, planex, carvex, conturo.

Offline RKA

  • Posts: 1055
Re: Replacing garage doors - DIY or contract out?
« Reply #3 on: April 11, 2018, 05:33 PM »
Raw costs are probably $1100 for the two doors and $350(?) for the opener.  An installer would probably knock it out in 4-5 hours.  So your quote is pretty reasonable. 

I'm fairly handy, however, I knew I would be fussing getting everything aligned right so the doors operated smoothly (never installed one before).  It might take me a day to get the first door set up and maybe another half day to do the second door.  Then I still had to dispose of the old heavy wooden doors and I don't have a truck.  Finally, I didn't want to deal with setting up the torsion springs (well, winding them).  So I gladly farmed out the door install, but since they weren't crazy about dealing with the jackshaft opener, I did that myself. Low and behold I did have to fuss with the springs to balance the doors so the jackshaft opener would work without tripping the cable tension monitor. 

So like many things, it depends on how you value your time.  If you've got plenty of it, DIY and save a few hundred.  If you just want it done in a day without any headaches, pay someone that does it day in and day out. 
-Raj

Offline Kevin D.

  • Posts: 879
Re: Replacing garage doors - DIY or contract out?
« Reply #4 on: April 12, 2018, 05:22 AM »
Knowing a garage door installer from years past, I would stay away from DIYing it.  I do just about any repair/reno myself, but this is a tricky area.  A seasoned guy in this field will do way better typically more often than not than you in the quality of work you will get.  If you are dealing with tension springs, this is especially true.  Those things can kill you if not dealt with properly.
Kapex, CT-SYS, SYS-Cart, Pro 5 Sander, CT36AC, TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus,  Domino XL, MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Floor Mat, Festool Stein, Multi-Tool, tape measure, large and small Festool floor mats (foam rubber).

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11300
  • Another Avatar Coming Soon
Re: Replacing garage doors - DIY or contract out?
« Reply #5 on: April 12, 2018, 08:07 AM »
Garage doors are similar to fiberglass insulation installation in that when you look at everything involved it is commonly better to pay more to get it out of your hair so to speak.  Get a good product and a reputable company.  Make sure that they have experience installing wooden doors if that is your type.

I recently had to have bottom garage door panels replaced for a condo project.  The company had been in business for 50 plus years.  They came out and quoted the job.  The were awarded the bid.  By doing it in bulk it saved each owner about 40%.  We hen the panels came in the installer had virtually no experience with wooden garage doors.  For two days I had to help him scribe and install doors using my tools.  He was experienced only with metal doors - thick bottom gaskets / weatherstripping.  When they got to the last four they found out that their assumption that they were all the same design was incorrect.  They had to order 4 new door panels (at their cost of course) and install.  That installer didn’t need my help or tools.  His scribes weren’t as nice as mine but they worked.

Peter

Offline kevinculle

  • Posts: 195
Re: Replacing garage doors - DIY or contract out?
« Reply #6 on: April 12, 2018, 08:11 AM »
We replaced our 16'x 7' door about 4 years ago.  The installer did the job including new tracks single handed & it took him perhaps 2 hours.  We did not replace the opener so this was a door & track install only.  My recollection is the installation cost was in the neighborhood of $200-$250.  At that price I would definitely pay for a professional installation.

Offline JimH2

  • Posts: 569
Re: Replacing garage doors - DIY or contract out?
« Reply #7 on: April 12, 2018, 10:04 AM »
Because of a large wood beam that supports the upstairs that runs along the ceiling of the garage, a traditional ceiling mounted opener won't work - I will need to use a jackshaft opener like the LiftMaster 8500. Pricier but they seem to have decent reviews.

The doors are 9' wide by 7' high, uninsulated. Since this is not my workshop (I have a detached shop elsewhere on the property), I don't really care about keeping the garage heated, so I'm fine with replacing them with more modern but still uninsulated doors.

You will be happy that the motor is wall-mounted and not overhead. I'd still get insulated doors whether or not the garage will be heated.