Author Topic: What - non Festool - tool / workshop related gizmo/stuff did you buy today?  (Read 19486 times)

0 Members and 1 Guest are viewing this topic.

six-point socket

  • Guest
Hi!

I love picture threads  [eek] [eek] [eek] and I love being inspired by purchases other people make  [scared] [scared]  [eek] [eek]  [big grin] [big grin] - it would be really cool if we could get this thread running.

Please share whatever you feel like sharing when you made a tool / workshop related purchase - even the smallest gizmo/gadget  [big grin]  [big grin]  [big grin] Just no new Festool purchases, as there is an existing thread for that on the main board. :)

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -


I'll kick it off with my new, personalized Dryplexx Softshell Work/Shop-Jacket from Engelbert-Strauss I received today among with some personalized workshop T-Shirts, too.




Kind regards,
Oliver

Offline Mort

  • Posts: 345
  • World's Tallest Midget
My latest was two Bessey 24" clamps. I don't have a picture, but just imagine what one Bessey 24" clamp looks like, and double it.
I hate signatures.

Offline RobBob

  • Posts: 984
Beall Tilt Box II to use with my new Bosch Reaxx table saw.   ;D

Offline HarveyWildes

  • Posts: 357
A Rockler Dust RIGHT Cord and Hose Holder.  It doesn't swing around like the Festool Dust Extractor boom, but it's much less expensive and might serve until I can build my own out of PVC.

Some Makita old style systainer knock-offs and some Kaizen foam to organize them.  We'll see how that works.

A cheap sound meter off of Amazon.  I'm going to measure the sound of different tool combinations in my shop.  I'm still wondering if I can get away without ear protection for a CT 36 and ETS EC 150/3.

Some Mirka interface pads for my ETS.

Some quantum tilt out bin sets for small parts.

Offline ChrisK1970

  • Posts: 550
  • Wicked Awesome
A couple of things much needed...
Dark Helmet.....Remember! Evil will always triumph over good. Because good is dumb!

Offline erock

  • Posts: 1254
This is my first full summer in my new shop.  I have 8" insulated walls.  The other day it was 87* outside, my shop was 74*, way too warm for my liking.  So today I picked up this window AC unit.   I was originally going to go all out with a Mitsubishi ductless wall mount AC unit.   But I'm gonna give this little guy a try before dropping the coin on the Mitsubishi unit.   This is a little big box store number that didn't break the bank.



This past Saturday I visited my local woodworking store.   I don't know how, but the Bosch GTS1031 table saw found it's way into the bed of my truck..... [cool]



Lastly, a while ago I received the Ultimate Dust Deputy from Toolnut. 
 
As of now, all three new items for my shop are STILL in the original boxes.   That will all change tomorrow morning. 
First I'll install the AC unit.  Second I'll set up the Bosch table saw and then I'll hook up the UDD to my CT26. 
All so I can start building a chicken coop !    [scared]
The chicken coop is not for me.  I'm actually gonna get paid for building something  [eek]   [eek]

Eric
 

Offline Paul G

  • Posts: 1812
My new story pole tape measure from fastcap isn't terribly exciting, but it was on sale  [cool]
+1

Offline Kev

  • Posts: 7504
Uvex Goggle Visor (I found these particularly good to wear if you also use spectacles)


Luchs polycrystalline diamond blade heading for the TSC55


Stihl safety for my noggin on overhead branches
* IMG_1850.JPG (0 kB - downloaded 69 times.)
* IMG_1851.JPG (0 kB - downloaded 50 times.)

Online #Tee

  • Posts: 681
Uvex Goggle Visor (I found these particularly good to wear if you also use spectacles)
(Attachment Link)

Luchs polycrystalline diamond blade heading for the TSC55
(Attachment Link)

Stihl safety for my noggin on overhead branches
(Attachment Link)
(Attachment Link)

very cool kev! some nice items everyone is posting here [tongue]
When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline McNally Family

  • Posts: 361
  • Festool Atomic Phaser Particle Blaster (APPB Set)
In keeping with my goal of learning the metric system myself and teaching my Son as well, tools that show both Metric and Imperial measurements:

1) Starrett C434ME-300 300 and 11-3/4" Combination Set with Square, Center and Reversible Protractor Head and Blade

http://www.starrett.com/metrology/product-detail/C434ME-300
 
2) Mitutoyo 500-197-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 8"/0 to 200mm Measuring Range           

http://www.mitutoyo.com/Images/003/308/500-197-30.jpg
 
3) Mitutoyo 950-300, Pocket Steel Rule, 6"/150mm (1/64"/1mm), 1/2" Wide, With Pocket Clip

http://www.use-enco.com/1/1/27424-950-300-mitutoyo-pocket-satin-chrome-eng-met-steel-rules.html   
« Last Edit: June 15, 2016, 05:26 PM by McNally Family »
GREEN: In order of purchase = C18 5.2 Set w/Centrotec Installer's Set | CT26 w/Installer Cleaning Set | CT Wings | SYS-MFT | RS 2 E | Hose w/ Sleeve 3.5m | metric+imperial ZOBO bit sets | Centrotec Stubby Brad Point Bit Set 3-8mm |  HSS D3-10 CE/10x Metric Twist Drill Bit Set | 115mm X 226mm Hand Sanding Block | 80mm X 133mm Hand Sanding Block | HSK D21.5 5m hose | CT Boom Arm Bundle Set |  Won the CXS Li 2.6 90 Limited Edition on 06/20/2016 | Metric Parallel Guide Set | 1080 Plate for custom MFT | Clamping ElemenTS (1) | Quick Clamps For MFT (2) | Festool 300mm Screw Clamps set (1) | Festool 120mm Screw Clamps set (1) | Next  Purchase: Something else Metric |

RED: In order of purchase = Mafell P1cc w/tilting base | Complete range of Mafell blades | Collins Coping Foot |  F 160 (x1)+F 110 (x1)+F 80 (x1) w/Guide pocket, clamps & Connector (x1)  | Angle fence F-WA | Next Purchase :  TBD

Offline Holmz

  • Posts: 3405
I ain't no mathematician but i have some negative and positive screwdrivers
I ain't no pilot but i have some planes.
I ain't no sucker but i have a vacuum.
And I has me some saws, and some sandpapers.

Offline Kev

  • Posts: 7504
@Locky is to blame [wink]








Offline Jimmy FineCut

  • Posts: 268
Blum Eco drill that also looks like a shocked robot

Offline Elmar50

  • Posts: 54
My 20 yr old Jet table saw's motor failed on me last Sunday. The SawStop was an unexpected but not unanticipated purchase that same day. The Jet would have been on it's third motor service. The added power, much improved dust collection and safety features drove the decision that I would not sink any more money into the Jet. I had considered the Jobsite model but stability and power won out over portability. A bonus was being able to use my cast iron router table on the new saw. The saw works great!

Offline ChrisK1970

  • Posts: 550
  • Wicked Awesome
I've got the TGP36 version of that saw its beautiful.
Dark Helmet.....Remember! Evil will always triumph over good. Because good is dumb!

six-point socket

  • Guest
So many contributions, great!  [eek] [eek] [eek]   [big grin] [big grin] [big grin]

Thanks for sharing all those awesome purchases!

Kind regards,
Oliver

Offline polarsea1

  • Posts: 286
Bought an inexpensive 8 1/2" blade for my Metabo SCMS intended to cut some 3/8" fiberglass fence rods for a break down drying rack.

six-point socket

  • Guest
What's the best day of the month? Snap-On Tool Truck day!!!  [scared] [scared]  [eek] [eek]  [big grin] [big grin]

Always happy when my buddy arrives with his truck.

Today he had for me:

SDM410           Set, Bit, Metric, (41 pcs)
AWSGM800   Set, Wrench, Metric, Hex, Combination T and L-Shape, Soft Grip, Blue Handle, 8 pcs. (2mm to 10mm)   
AWSGT800   Set, Wrench, TORX®, Combination Tand L-Shape, Soft Grip, Green Handle, 8 pcs. (T10 to T45)

PTNDM4KA   4 pc Metric Magnetic Power Nut Setter Set (2x)
BTWOSK           5 pc Bit Miniature Ratcheting Handle Set (Blue-Point®)
106BTMXGLS    1/4" Drive Knurled Extension Set (1 1/4–11") (106BTMX) + 4 Glasses with Snap-On logos from '23, '48, '50 and '95.

MB5D               Bronze Injector Brush (Blue-Point®)
AC5C                Hand Scratch Brush (Blue-Point®)
VSG15T            FAST REL VISE GRIP 9LN





Kind regards,
Oliver
« Last Edit: June 21, 2016, 09:02 AM by six-point socket »

Online blaszcsj

  • Posts: 254
Picked up a veritas honing guide. Very nice set up.

OF1010 EQ Router | MFT/3 | DF500Q | Carvex 420 | ETS EC 150/3 | CT 36 Auto Clean | TS55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT |

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
GEDORE 1/2" female to 3/8" male adapter.



Kind regards,
Oliver

Offline charley1968

  • Posts: 441
@Mort : you gave me my first good laugh today.
Just for today..

Offline charley1968

  • Posts: 441
A cuppa coffee.
Just for today..

Offline Kev

  • Posts: 7504
4x Black Sys2's .. Tanos (does that could as non Festool?) and a Stihl moisture meter - should arrive tomorrow [smile]

Also ordered a bunch of stuff from Incra .. but it won't get here for a while [sad] ..

LS25WFNCSYS   INCRA LS Super System - 25" & 635mm Range in Metric

M-IRMASTER   INCRA Rules Master Set (Metric)

^ BND150M   INCRA Precision Bend Rules - Metric 150mm

^ BND300M   INCRA Precision Bend Rules - Metric 300mm

^ CENT300M   INCRA Precision Specialty Rules - 300mm Centering Rule

^ IRPENCIL   INCRA 0.5mm Mechanical Marking Pencil x2

^ PRO160M   INCRA Precision Specialty Rules - 160mm Protractor

^ RULE150M   INCRA Precision Marking Rules - Metric 150mm

^ RULE300M   INCRA Precision Marking Rules - Metric 300mm

^ T-RULE150M   INCRA Precision T-Rules - Metric 150mm

^ T-RULE300M   INCRA Precision T-Rules - Metric 300mm

WXWR365   Wixey WR365 Digital Angle Gauge with Level

WXWR25   Wixey Mini Digital Height Gauge

INC-PUSHGUARD   INCRA PushGuard Combo Push Block & Hand Guard

MJGR-200   Micro Jig GRR-Ripper System Advanced with DVD

......


Plus my monster CADEX order should arrive soon [thumbs up]

Offline bkharman

  • Posts: 1836
I didn't buy it today but a while back I bought some B+W P5 wireless headphones. They are truly incredible sounding and I wear them at work, on walks and a lot in my shop as passive noise suppression.

Comfy as heck and brilliant sound to boot!



Cheers. Bryan.


Sent from my iPhone using Tapatalk
People, I just want to say, you know, can we all get along? Can we get along?

Offline DiscoStu

  • Posts: 137
I bought a couple of Aldi cheap clamps and made a rack for them. They're not the best quality but very cheap and will be useful. £2.50 each is what they work out to be.


Offline Untidy Shop

  • Posts: 2431
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Kev

  • Posts: 7504


I almost feel like I should list all of the guilty parties for making me buy this lot .. @Peter Parfitt and @Runhard would be on the higher end of the guilt ladder, but there are so many to thank [big grin]

I must say, buying online from http://www.incrementaltools.com/ and shipping to Australia was ...

Easy
Well priced
Friendly
Quickly shipped
Cost effective for international freight
Easy
Well packaged
Easy
Easy
Easy

!!!

Honourable guilt mention ... @Locky [wink]
« Last Edit: July 18, 2016, 04:20 AM by Kev »

Offline Holmz

  • Posts: 3405
@Kev -- What a haul!
I ain't no mathematician but i have some negative and positive screwdrivers
I ain't no pilot but i have some planes.
I ain't no sucker but i have a vacuum.
And I has me some saws, and some sandpapers.

Online Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3407
    • New Brit Workshop on YouTube
(Attachment Link)

I almost feel like I should list all of the guilty parties for making me buy this lot .. @Peter Parfitt and @Runhard would be on the higher end of the guilt ladder, but there are so many to thank [big grin]

I must say, buying online from http://www.incrementaltools.com/ and shipping to Australia was ...

Easy
Well priced
Friendly
Quickly shipped
Cost effective for international freight
Easy
Well packaged
Easy
Easy
Easy

!!!

Honourable guilt mention ... @Locky [wink]

Hi Kev,

That bike is nothing to do with me - I hope !

Peter

Offline Kev

  • Posts: 7504

Hi Kev,

That bike is nothing to do with me - I hope !

Peter

@Peter Parfitt HAH [big grin]

You're not guilty on the bike .. That's my Yeti 575, parked there as I'm about to put the AYUP's on for a bit of night trail riding.

Kev.

Offline SMJoinery

  • Posts: 528
(Attachment Link)

I almost feel like I should list all of the guilty parties for making me buy this lot .. @Peter Parfitt and @Runhard would be on the higher end of the guilt ladder, but there are so many to thank [big grin]

I must say, buying online from http://www.incrementaltools.com/ and shipping to Australia was ...

Easy
Well priced
Friendly
Quickly shipped
Cost effective for international freight
Easy
Well packaged
Easy
Easy
Easy

!!!

Honourable guilt mention ... @Locky [wink]

Jeez Kev, you starting up a new dealership.
This is going to be my new screensaver! [tongue]

Offline Runhard

  • Posts: 703
(Attachment Link)

I almost feel like I should list all of the guilty parties for making me buy this lot .. @Peter Parfitt and @Runhard would be on the higher end of the guilt ladder, but there are so many to thank [big grin]

I must say, buying online from http://www.incrementaltools.com/ and shipping to Australia was ...

Easy
Well priced
Friendly
Quickly shipped
Cost effective for international freight
Easy
Well packaged
Easy
Easy
Easy

!!!

Honourable guilt mention ... @Locky [wink]

Nice Kev!

 
Daniel

Offline Runhard

  • Posts: 703
I bought a new house today with a 845sqft 3 car garage and a 20x20 space in the basement for shop space. This is a big improvement over the 250sqft basement shop that I currently have! I bought a Hammer A3-41 with silent cutter head back in December and received it in March that I will finally be able to take out of storage. I will now need to purchase a tablesaw. I'm wishing that I went with a Felder over the Hammer so that I won't feel the need to upgrade a few years down the road. I also bought 2 axes and a Sloyd knife from Lie Nielsen. I also just bought a bike, but that's not shop related.
Daniel

Offline Kev

  • Posts: 7504
Just ordered a Lamello Zeta P2 and related stuff ...

Lamello Zeta P2 Machine and Elements Kit
Lamello Invis Mx2 Starter Kit
Divario P18 Starter Pack
Divario P18 Marking Jig Kit
True Position Drill Guide Basic Jig

I'm taking advantage of the Lincoln Sentry AWISA promotion that ends in a few days (for people in Oz). Sadly I have to wait a few weeks for their stock to turn up.

Seems the Divario connectors installation for the twin hole piece is a match for the Mafell DD40 ... my resolve to avoid buying Mafell gear is getting seriously weak [embarassed] [sad]

Offline Holmz

  • Posts: 3405
I received multiple boxes with Incra table saw fence parts.
I ain't no mathematician but i have some negative and positive screwdrivers
I ain't no pilot but i have some planes.
I ain't no sucker but i have a vacuum.
And I has me some saws, and some sandpapers.

Offline Kev

  • Posts: 7504
I received multiple boxes with Incra table saw fence parts.

@Holmz what happened to the plans for an Erika then??

Offline Holmz

  • Posts: 3405
I received multiple boxes with Incra table saw fence parts.

@Holmz what happened to the plans for an Erika then??

@Kev
... Both... Together !
 [wink]
I ain't no mathematician but i have some negative and positive screwdrivers
I ain't no pilot but i have some planes.
I ain't no sucker but i have a vacuum.
And I has me some saws, and some sandpapers.

Offline HarveyWildes

  • Posts: 357
Incra Mast-R-Lift II
Set of clean sweep MagnaLOCK rings
Porter-Cable guide bushing MagnaLOCK ring.

It's replacing an old (pre-2006) Jessum belt-driven lift that is sticking badly.  I know Incra is made by Jessum, but no one is complaining about the new lifts sticking, so I'm hopeful.  The clean sweep rings were part of the decision, as I'd like to improve the airflow from the top of the table to my under-table dust collection port.

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Hi!

Great stuff everyone!

For me was Snap-On day again :)

Finally got my 1/2" 16.9 to 339 Nm TechAngle torque wrench  [drooling] [drooling] [drooling] [drooling] [drooling] [drooling] [drooling]

Getting acquainted to it in my friend's (and Snap-On Dealer) van.



And here it is:



Kind regards,
Oliver
« Last Edit: July 31, 2016, 04:29 PM by six-point socket II »

Offline jmbfestool

  • Posts: 6558
Never used one before..... Ive been having some fun.... Shitting my pants.  I have soon learnt I HATE hollowing deep bowls its slow...boring.... and tense lol

Orderd a few Robert Sorby chisels.  Decided needed bigger stuff for hallowing so ordered sovereign chisels and Hope hollowing system with camera.  Although I did really want Clarks hollowing system or Korby but both American so not easy to get.  So settled with a less heavy duty british version. Hopefully it will come tomorow. 
 

*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline jmbfestool

  • Posts: 6558
Just ordered a Lamello Zeta P2 and related stuff ...

Lamello Zeta P2 Machine and Elements Kit
Lamello Invis Mx2 Starter Kit
Divario P18 Starter Pack
Divario P18 Marking Jig Kit
True Position Drill Guide Basic Jig

I'm taking advantage of the Lincoln Sentry AWISA promotion that ends in a few days (for people in Oz). Sadly I have to wait a few weeks for their stock to turn up.

Seems the Divario connectors installation for the twin hole piece is a match for the Mafell DD40 ... my resolve to avoid buying Mafell gear is getting seriously weak [embarassed] [sad]

Nice!!!! 

Im tempted but......
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline jmbfestool

  • Posts: 6558
I bought a couple of Aldi cheap clamps and made a rack for them. They're not the best quality but very cheap and will be useful. £2.50 each is what they work out to be.



Im just getting some prices on clamps. Got one price 😭😭
Clamps are so expensive.  Yet I have been stung couple times with cheap.
But £2.50 is cheap enough to say  it.
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline Kev

  • Posts: 7504

Nice!!!! 

Im tempted but......

@jmbfestool

BUT ... you've become a wood turner and there's nothing in your future that doesn't involve check flannelette shirts and long curly beards [big grin] [big grin] [big grin]

Ironically it's the Invis system that's got me curious - and you don't need the Zeta to install them.

Offline Kev

  • Posts: 7504
I bought a couple of Aldi cheap clamps and made a rack for them. They're not the best quality but very cheap and will be useful. £2.50 each is what they work out to be.



Im just getting some prices on clamps. Got one price 😭😭
Clamps are so expensive.  Yet I have been stung couple times with cheap.
But £2.50 is cheap enough to say  it.

My local has a promo on Bessey (that I don't think goes for much longer) .. you get 30% off if you buy a mixed 10 clamps. Just don't know what to grab. K-Blocks are great, but have quite a few already.

Offline Kev

  • Posts: 7504
Hi!

Great stuff everyone!

For me was Snap-On day again :)

Finally got my 1/2 16.9 to 339 Nm TechAngle torque wrench  [drooling] [drooling] [drooling] [drooling] [drooling] [drooling] [drooling]

Getting acquainted to it in my friend's (and Snap-On Dealer) van.



And here it is:



Kind regards,
Oliver

@six-point socket II

Is that scary mask in the van the one your friend uses to rob banks to pay for his Snap-on addiction? [smile]

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Hi!

Great stuff everyone!

For me was Snap-On day again :)

Finally got my 1/2 16.9 to 339 Nm TechAngle torque wrench  [drooling] [drooling] [drooling] [drooling] [drooling] [drooling] [drooling]

Getting acquainted to it in my friend's (and Snap-On Dealer) van.



And here it is:



Kind regards,
Oliver

@six-point socket II

Is that scary mask in the van the one your friend uses to rob banks to pay for his Snap-on addiction? [smile]

Hey Kev!

Basically it's a secret, but I guess it's safe to tell you, here on a woodworking platform  [scared] [scared]:

My friend and I, we have a side business. We travel the world to exorcise those pesky GEDORE'mons from car- and other workshops... It's quite dangerous  [scared]  [scared], doesn't pay as well as robbing banks  [eek] [eek], but the revenue through owning Snap-On shares - is OK  8) 8) 8). I mean, the harder we work, the more Snap-On is bought and shareholder value raises...

Here's a picture of me in action. That was quite a beast, had to bring out the crossed ratchet and pop-up screwdriver, too.... ;) ;) ;)



Kind regards,
Oliver

PS: Maybe for those that don't know, it's a face shield for welding/welding helmet - Snap-On offers a lot of cool "patterns" even an "Iron Man"... :)
« Last Edit: July 26, 2016, 03:54 AM by six-point socket II »

Offline Kev

  • Posts: 7504
LoL @six-point socket II

I just know you've got a can of blessed WD40 in you other hand [big grin]

So is yours the Secret Snap-on Order or The Knights of Snap-on ?

(I always get my holy orders confused)

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
LoL @six-point socket II

I just know you've got a can of blessed WD40 in you other hand [big grin]

So is yours the Secret Snap-on Order or The Knights of Snap-on ?

(I always get my holy orders confused)

Oh yeah! :) :) :)

We're such super special secret squirrel stuff, we don't even have a name... But I like "The Knights of Snap-On" ... Maybe a new tattoo is in order....... ;)

Kind regards,
Oliver

Offline jmbfestool

  • Posts: 6558

Nice!!!! 

Im tempted but......

@jmbfestool

BUT ... you've become a wood turner and there's nothing in your future that doesn't involve check flannelette shirts and long curly beards [big grin] [big grin] [big grin]

Ironically it's the Invis system that's got me curious - and you don't need the Zeta to install them.


Monitor and Camera arrived today.


Hope hallowing Jig. Had a play for 30mins and I love it!!  There are better systems available but this does the job perfectly.  I feel safe and I dont get arm ache because Im sh itting myself



*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline HarveyWildes

  • Posts: 357
Incra Mast-R-Lift II
Set of clean sweep MagnaLOCK rings
Porter-Cable guide bushing MagnaLOCK ring.

It's replacing an old (pre-2006) Jessum belt-driven lift that is sticking badly.  I know Incra is made by Jessum, but no one is complaining about the new lifts sticking, so I'm hopeful.  The clean sweep rings were part of the decision, as I'd like to improve the airflow from the top of the table to my under-table dust collection port.

To add to the above, I took advantage of a Woodcraft sale to get the big boy PC router motor.  Just couldn't resist.  Added the 1/4" collet.

A while back I routed my left index finger doing something that I knew better than to do.  So I picked up a Woodpecker Free-Hand Guard as well.

And a couple of silicon glue cups.

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Missing part from my last Snap-On order came in Friday.

Snap-On CTUSB761 - turns the 14,4V Micro-Lithium battery packs into a power bank (5V 1A). (( @Festool USA maybe something to consider for the 10.8V and/or 18V batteries? - Would buy one straight away to throw into my CXS Systainer... :) ))



Kind regards,
Oliver

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Hi!

Got me some digital calipers from Mitutoyo and some Pica stuff...



Kind regards,
Oliver

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Got this little CoBolt and TwinKey from Knipex today  [big grin] [big grin] [big grin]



Kind regards,
Oliver

Offline Kev

  • Posts: 7504
Today I picked a peck of Pica Pencils


I'm also getting to crank up the base for my new Incra Positioner (thanks Precision Dogs)


" ... I'm just mad about saffron ..." (they call it my Lamello)


and it's got connections


You'll never ever see these out in the wild


I think "Divario" must be Italian for "I forgot to install a shelf before I assembled it ..."


Then there's the old real estate mantra ... position, position, position


I think the planets must have aligned today!!! [eek]



Offline jmbfestool

  • Posts: 6558
Lamello 🤑🤑🤑👌🏻👌🏻👌🏻👌🏻
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline Holmz

  • Posts: 3405
@Kev I am interested in what you do with the Invis, and also how the TruePosition jig works out.

That Zeta should be useful...
I ain't no mathematician but i have some negative and positive screwdrivers
I ain't no pilot but i have some planes.
I ain't no sucker but i have a vacuum.
And I has me some saws, and some sandpapers.

Offline Kev

  • Posts: 7504
@Kev I am interested in what you do with the Invis, and also how the TruePosition jig works out.

That Zeta should be useful...

@Holmz the Invis is targeted at an interesting way of connecting fins to boards (think big old timber stuff). It'll be a while before I get to play with it, but it was available for a promo price .. can't pass that by.

The TP jig is very nicely made. Yes - looking forward to using it [smile]

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Great stuff @Kev

Like this best, lmao:


(...)

I think "Divario" must be Italian for "I forgot to install a shelf before I assembled it ..."


(...)

Kind regards,
Oliver

Offline Holmz

  • Posts: 3405
I need to look for those promos .got a quote for puck lights... Ouch
I ain't no mathematician but i have some negative and positive screwdrivers
I ain't no pilot but i have some planes.
I ain't no sucker but i have a vacuum.
And I has me some saws, and some sandpapers.

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Hi!

Today a pre-loved Woodpeckers 300mm Square arrived and a brand new Mini Square, fantastic.







Very functional also outside the shop. ;) ;) ;) ;) ;) ;) ;) ;)



Kind regards,
Oliver

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Got a new pair of safety/work boots today, very comfy - love the look.



Kind regards,
Oliver

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 10400
  • Let's Redux / Revive / Rewind / Rollback the FOG!
just as a heads up, PICA has introduced new products.  I saw these in a Lee Valley Catalog:

http://www.leevalley.com/us/home/Search.aspx?action=n

If the link doesn't work you can go to levelly.com and do a search for Pica.

Peter
Scraps to Smiles.  To be continued.....  Stay Tuned.

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Hi!

Got a new, better than my old, PRCD-S (Switched Protective Earth - Portable Residual Current Device) from Kopp Germany today. Bought it after someone explained to me why the product I have used before from a different manufacturer is basically useless, quite shocking (no pun intended) given this is supposed to be a safety device.



 [eek] [eek] [eek] [scared] [scared] [scared] [unsure] [unsure] [unsure] [mad] [mad] [mad] [wink]










Kind regards,
Oliver

Offline Michael Kellough

  • Posts: 2820
just as a heads up, PICA has introduced new products.  I saw these in a Lee Valley Catalog:

http://www.leevalley.com/us/home/Search.aspx?action=n

If the link doesn't work you can go to levelly.com and do a search for Pica.

Peter

Use this link.

Offline CrazyLarry

  • Posts: 265
Today I picked a peck of Pica Pencils

I find it immensely revealing to see all the lamello (euro) kit arriving in systainers and the true position (us) kit in a glorified cardboard box... only made more laughable by the little plastic handle esp given the price!

Offline Kev

  • Posts: 7504
I find it immensely revealing to see all the lamello (euro) kit arriving in systainers and the true position (us) kit in a glorified cardboard box... only made more laughable by the little plastic handle esp given the price!

@CrazyLarry so true. I'm currently in the process of moving a lot of my tools into a work unit while we fix up and present our house for sale .. moving all the systainer housed stuff was a snap. The TP is still in it's box on the bench behind me waiting to go into a box [sad]

Offline jobsworth

  • Posts: 4223
  • Burger Babe Says: I Even Buy Green Bananas
Got this Do hickey from Lee Valley, pretty kool, use it all the time

http://www.leevalley.com/us/wood/page.aspx?p=72846&cat=1,43513
Where the Heck Is My Pro 5 Sander At?

Offline Kev

  • Posts: 7504
Got this Do hickey from Lee Valley, pretty kool, use it all the time

http://www.leevalley.com/us/wood/page.aspx?p=72846&cat=1,43513

That thing is just crying out for an eye and some dinosaur teeth [big grin]

Offline RockstarRemodel

  • Posts: 23
    • Rockstar Remodel
Wasn't today, but my most recent non-Festool purchase was a BuildClean air scrubber. I'm digging it so far. It's not the magic air cleaner I had in my imagination, but I do notice an improvement.

I don't usually notice the noise because I work with ear protection always, but when the client comes in, I have to turn the jet engine down to 1.
Keep Rocking

Brendan with RockstarRemodel.com

Offline Kev

  • Posts: 7504
When you can buy a set for not much more than the 3 cutters yo want ...


... and sadly my local paint store is closing down, but I scraped up a bargain

Offline jobsworth

  • Posts: 4223
  • Burger Babe Says: I Even Buy Green Bananas
You are definitely keeping the economy going with all the stuff you buy buddy
Where the Heck Is My Pro 5 Sander At?

Offline DiscoStu

  • Posts: 137
Bought the UJK Dovetail jig. I was tempted by the Leigh but it was more than twice the price and I doubt it will get a lot of use.


Sent from my iPhone using Tapatalk

Online rst

  • Posts: 1337
Recieved the Bosch GAM 270 MFL Digital Angle Finder from Acme Tool today.   I got tired of using my small digital angle finder for longer work.  It has great features including a lazer.  It will be great for checking for square the steel/aluminum entrances that are a large part of the work I perform.
« Last Edit: August 29, 2016, 08:20 PM by rst »

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Hi!

Got me a water/dust/weather- and construction-site-proof "garage" 782 x 385 x 379 mm / 91 l (for my tool bag which is not water resistant and other stuff) and a diamond cutting disc.



Kind regards,
Oliver

Offline Kev

  • Posts: 7504
Just ordered another 3 cases of stain for the interior of wine barrels. I never seem to have enough [sad] [huh]

Offline Holmz

  • Posts: 3405
Just ordered another 3 cases of stain for the interior of wine barrels. I never seem to have enough [sad] [huh]

Clear Blanco or Tinto?
I ain't no mathematician but i have some negative and positive screwdrivers
I ain't no pilot but i have some planes.
I ain't no sucker but i have a vacuum.
And I has me some saws, and some sandpapers.

Online rst

  • Posts: 1337
Cab or merlot?

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Treated myself to these yesterday at a local hardware store and there is another package scheduled for delivery today  [eek] [eek]  [wink] [wink]



Kind regards,
Oliver

Offline Carquest

  • Posts: 31
Looks like Knipex, if so, you will never regret that purchase. Best pliers I have ever seen, worth every penny!

Offline Kev

  • Posts: 7504
@Holmz @rst

A boutique wine barrel stain maker called Shinas Estate ...

https://shinasestate.com/

... Amazingly good for the $'s.

Without a proper cellar I only keep a few cases on hand and mix it up with bottle shop purchases as we like variety. A cellar is a big tick item for the next place!!!



Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Looks like Knipex, if so, you will never regret that purchase. Best pliers I have ever seen, worth every penny!

Yes, Sir. It's two Knipex - I life 16 miles from the Knipex factory - so they are not completely unknown to me, as I do own a couple of them already ;)

---

As expected the package containing my new Fluke T 150 VDE was delivered today, great piece of equipment - loving it!





Kind regards,
Oliver

Online #Tee

  • Posts: 681
lovely new tools oliver!
When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline Kev

  • Posts: 7504
Today I got a a cheap Wagner spray gun and a couple of cheap chisels , rasps, etc ... Why?   Because my good stuff is as the wrong end of a very full storage unit [embarassed] [sad]





The cheap gun ($199AUD) is very disappointing, I think you'd get a better result throwing paint bomb balloons at the wall [mad]

You can alway use a rough chisel or two, so I'm not so upset about those.

Offline Richard/RMW

  • Retailer
  • *
  • Posts: 1606
  • www.ripdogs.com
    • RipDog Tools
Certainly qualifies as non-festool "stuff", workshop-related not so much, but it ate up next years tool budget...  [big grin]



RMW
Add-on products for Festool @ www.ripdogs.com
Discounts for FOG members @ www.ripdogs.com/fog-discount/

Offline jmbfestool

  • Posts: 6558
Got my new Lamello few days ago 😁



Had a play with it yesterday for first time. Trying it!  Straight away noticed something... and I think Lamello are missing a trick here.

I thought if I wanted to fix two clamex fixings ontop of each other I would have to drill two access holes on both timber faces inside and out.  I thought that would be daft why doesnt the clamex have a hole on both sides so I only need one access hole.

So I removed the rotating metal cam from the clamex and drilled another hole though. I reinserted the metal cam.  I drilled a access hole from one side through both lamello P slots.
BOOM works brilliantly!
At first I thought I might have trouble with alignemnt of the two allan key holes but Alan Key went through easily. 




*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline jmbfestool

  • Posts: 6558
Video yay!

*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline VW MICK

  • Posts: 768
Hi guys

Picked this up in the classifieds. I am really pleased with it. As I didn't think I would ever get a chance to own one. It really is such a well made nice piece of kit

And kudos to a really nice member of the Fog for letting me take over ownership

Mick

Offline Spiff

  • Posts: 107
Hi guys

Picked this up in the classifieds. I am really pleased with it. As I didn't think I would ever get a chance to own one. It really is such a well made nice piece of kit

And kudos to a really nice member of the Fog for letting me take over ownership

Mick

Ha - you beat me to it!!  Well done  [sad]  [big grin]

Offline Spiff

  • Posts: 107
In answer to the question in hand:

One of these, but in the 3m version.  Also made in Germany and also absolutely superb!!!  This stainless steel tape measure baffles everyone I show it to.  Yes, it opens itself, as if by magic.  Very useful when working single handed on large panels.  Super light too, with nothing to go wrong.  Whoever designed these is a genius!!   8)  [not worthy]

https://www.thetapestore.co.uk/media/catalog/product/cache/2/thumbnail/9df78eab33525d08d6e5fb8d27136e95/4/2/429-bmimeter-1_1.jpg


Online rst

  • Posts: 1337
I bought the Veritas honing guide set, three of the Diasharp stones, and the medium and carvers inflateable sanding drum set and sleeves.

Offline HAXIT

  • Posts: 117
I have been buying tools for woodworking, electronics and metal working for last 6 months and it it is not over yet. [sad]
CMT blade & bit cleaner, digital angle finder and router bits. Italy



Martor ice tempered stainless knives and scissors. Germany



Wera joker racheting wrench set metric & imperial. Germany



Scala 3 pc stainless steel precison squares. Germany
Oneway manufacturing multi-gauge. Canada



Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7493
  • Finger Lakes Region, NY State , USA
Nice stuff HAXIT!

 I like the CMT bits myself.  Someplace here in the USA was going out of business a few years ago and sold all there CMT stock at 50% off. I bought a ton of them.

I'd be interested to know more about that scissor line.  Have you had a chance to use them?

Seth

Offline HAXIT

  • Posts: 117
Picard magnetic nailholder hammer. Germany
Wiha heavy duty split head mallet.  Germany
Keller hand brush and table sweeper made with waxed beech wood and natural horsehair. Germany



Wiha 57 pc. dynamic & topra ratchet set. Germany
Firmer bevel edge chisels set. Germany



Stabila magnetic pocket and torpedo level. Germany
Knipex pliers & wrench set. Germany



Heuer vise and stand-lift. Germany


Offline HAXIT

  • Posts: 117
Nice stuff HAXIT!

 I like the CMT bits myself.  Someplace here in the USA was going out of business a few years ago and sold all there CMT stock at 50% off. I bought a ton of them.

I'd be interested to know more about that scissor line.  Have you had a chance to use them?

Seth
Hi Seth,
I think I did shop from the same place for CMT. It was like 3 years ago and it was 50% off but I do not remember the name.
I buy them from www.routerbitworld.com now. Rich is a great guy to deal with and shipping is always $1 and the the prices are lower compare to any where on line.
I am not new to Martor and have been using them for 7 years. If you do not loose it or loan it to a friend that has a bad habit to breaking stuff, then most likely they indestructible.
Here is the link for them in USA and you can order it right there.
   http://www.martorusa.com/

Offline Michael Kellough

  • Posts: 2820
Haxit, where did you buy the machinist squares?
I'd like to have that type with the extra plate on the back but have not found any in the states.

Offline HAXIT

  • Posts: 117
Haxit, where did you buy the machinist squares?
I'd like to have that type with the extra plate on the back but have not found any in the states.
http://www.traditionalwoodworker.com/Steel-Precision-Squares-Made-in-Germany/products/510/

Offline Michael Kellough

  • Posts: 2820
Thanks for the link! I buy Forstner type bits from them but never thought to look for squares there.

Online rst

  • Posts: 1337
In the wast week I bought the new Milwaukee 18v 15ga brad nailer to replace my ancient 30 year old Senco FN 40... Acme sent me a 15% off birthday discount.  Also bought the Milwuakee 28 piece hole hawg set...$129.00 with 10% discount.  Ordered 2 1/2" spoil board bit with disposalble blades from Toolstoday...10% off.

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Hi!

After some health wise - troublesome months - yesterday was again one of better/good days that have gotten rare as of lately and I spent some quality time with my Dad at the Gedore factory shop.





Bought just a couple of small pieces, can't do anything tool related anyway right now.



Kind regards,
Oliver

Offline Kev

  • Posts: 7504
@six-point socket II

I'm sad to hear you have health issues. My thoughts are with you.

Kev.

Offline ivanhoe

  • Posts: 165
Waiting for my Incra 1000 SE to arrive for my table saw. [big grin]

Offline Untidy Shop

  • Posts: 2431
@six-point socket II

Having had my own issues in the second half of last year, I can sympathise with your current health issues and the desire to return to daily use of your tools. Best wishes for your continued recovery.

_______

Makita Impact which was a discontinued model I found whilst stocking shelves at work. Got the retail and employee discount.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
@six-point socket II

I'm sad to hear you have health issues. My thoughts are with you.

Kev.

Thank you very much @Kev !

@six-point socket II

Having had my own issues in the second half of last year, I can sympathise with your current health issues and the desire to return to daily use of your tools. Best wishes for your continued recovery.

_______

Makita Impact which was a discontinued model I found whilst stocking shelves at work. Got the retail and employee discount.


Thank you very much @Untidy Shop

--

Just to clarify, it's nothing life threatening but it's really, really annoying because it sometimes changes within an hour - makes advance planning completely obsolete and I only dare to leave the house on what I call a "100% good day". Plus, I thought I was done with it, then it hit me again out of the blue. So I'm getting used as pin cushion again...

I still hope to be able to continue projects and start some new ones in a couple of months.

Kind regards and again, thank you very much for the well wishes!
Oliver

Offline pettyconstruction

  • Posts: 305
Got this just after Christmas , took about 6-7 weeks to build.
Logo's on last week.
Has really helped my work flow
Charlie


Sent from my iPhone using Tapatalk Pro

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Hi Charlie,

Wow, that looks like something Spec.Ops. would jump out of to catch some bad guys.

What a terrific trailer! Congrats on that purchase!

Kind regards,
Oliver

Offline onevw

  • Posts: 44
Must run fume hood with this stuff257901-0257901-1

Offline pettyconstruction

  • Posts: 305
Hi Charlie,

Wow, that looks like something Spec.Ops. would jump out of to catch some bad guys.

What a terrific trailer! Congrats on that purchase!

Kind regards,
Oliver
That's funny cuz,the paint is called "desert sand storm"
Charlie


Sent from my iPad using Tapatalk Pro

Offline LooseSox

  • Posts: 28
Today I bought a CMT 10" calibration disc and a few adhesive sandpaper discs so I can get the table saw set up perfect and use it as a disc sander too. Speaking of the table saw, I picked up the sawstop jobsite saw not long before I joined the FOG along with a bosch gex125-150ave ros.

Offline Poindexter

  • Posts: 98
Although, not something directly for the workshop they do aid in making stuff that goes into the workshop.  Some heavier Pfanner Gladiator chainsaw pants for the < 10 degree F days.  Been wearing the ventilation ones for a few months, but those let a little too much air up the rear  [eek]  in the winter. 


 
And a box of 50 Pfanner work gloves because I don't want to run out anytime soon!


Why chainsaw pants over chaps?  Well, when you're out in the woods all day you're spending more time planning a fall and skidding it out than actually running the saw.  Chaps are easier to take off than to put on.  And it never fails that an unseen limb or buck cut needs the saw on it and fatigue + daylight weening might make one neglect the chaps for that cut (I'm very guilty of this).  But I have never felt the desire to ditch the trousers for nature's full ventilation... the family jewels aren't for ticks!

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7493
  • Finger Lakes Region, NY State , USA
Not a pro , just the occasional tree to cut up. Never tried the pants but I have the chaps and find them bulky and awkward. Don't like the straps and such either. The pants look like the way to go.

Seth

Offline Trevin

  • Posts: 29
@HAXIT

Your Firmer bevel edge chisels set. Germany  looks just like the Two Cherries set I just picked up.  They were also made in Germany.  So far I love them.

Trevin

Offline HAXIT

  • Posts: 117
@HAXIT

Your Firmer bevel edge chisels set. Germany  looks just like the Two Cherries set I just picked up.  They were also made in Germany.  So far I love them.

Trevin
They make them for few manufactures under different names but all have the same quality.

Offline HAXIT

  • Posts: 117
The very last purchase was last Friday from two locations.
51 pieces WIHA precison tool set.



Aigner Distometer


Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7493
  • Finger Lakes Region, NY State , USA
That is a nice tray full of screwdrivers!

Do you have a part / stock / name number for that set?

Seth
« Last Edit: February 18, 2017, 04:01 PM by SRSemenza »

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7493
  • Finger Lakes Region, NY State , USA
Found it ..........  Wiha 92191.

Seth

Offline Coliban

  • Posts: 100
Woodpecker

258555-0
Green: OF1010, DF500, CTL Midi, RO 125, CXS, SYS-Centrotec 2015/W, MFS 700, MFT/3
Red: Mt55cc, P1cc

Offline HAXIT

  • Posts: 117
Found it ..........  Wiha 92191.

Seth
Yep, that is the one.

Offline neilc

  • Posts: 2019
Here's a good deal on that Wiha set - $203.00 / 27% off


https://www.kctoolco.com/wiha-92191-51-piece-master-technicians-precision-set/


I have this version- https://www.kctoolco.com/wiha-92190-50-piece-master-technicians-bench-top-tool-set/


 in the metal storage rack - really a great assortment

Offline VW MICK

  • Posts: 768
@HAXIT

That looks like a nice set of screw drivers they definitely need to be in a drawer

I got these Friday . Now need to build a rack will need room for expansion will order 8
More next month love these clamps

Thanks Mick

Offline LooseSox

  • Posts: 28
Does it count if I didn't buy it? This evening I went to collect payment for a recent job and the customer gave me a bonus of an extra $200 plus the 18v Bosch Destroyer brushless kit! Definately could handle a few more customers like that.


Online rst

  • Posts: 1337
I bought the 18v Milwaukee 1 1/8" rotary hammer, couple SDS drills, and chisels.  Now there are jobs where I won't need to drag my 30 some year old Hilti TE-72 along.  A couple months ago I bought the Milwaukee 18v 15 ga brad nailer...used the the day it came to reinstall mahogany stops at a skating rink where we replaced all the 4' x 5' insulated units.   Won't need my Senco and hose as much.

Offline Bert Vanderveen

  • Posts: 304
Just arrived from Axminster: the UJK Bandsaw Buddy (for the Hammer N4400 that will arrive early May), a Festool cutter for my MFK, a Veritas spokeshave (beautiful recreation of a classic model), a 225-gram Japanese hammer (to supplement the 375-gram one I already have), a Veritas brass mallet, and a Japanese restorer's cats paw. With the British Pound / Euro ratio being what it is, almost a steal…
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 Mk2 · MFT/3 + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 EQ · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · PSB300 · LR32-SYS · RO150 · Kapex KS120 · MFK700 · RO90 …

Offline HarveyWildes

  • Posts: 357
8" Knew Fretsaw

Online Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3407
    • New Brit Workshop on YouTube
Just arrived from Axminster: the UJK Bandsaw Buddy (for the Hammer N4400 that will arrive early May), a Festool cutter for my MFK, a Veritas spokeshave (beautiful recreation of a classic model), a 225-gram Japanese hammer (to supplement the 375-gram one I already have), a Veritas brass mallet, and a Japanese restorer's cats paw. With the British Pound / Euro ratio being what it is, almost a steal…

Its okay for some - I have a pair of Dutch bikes on order and I doubt whether the pound will pick up between now and Easter !

Peter

Offline Poindexter

  • Posts: 98
I rounded out the Woodpeckers collection by making it more square.  6 & 8" squares came in today.

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Way nice @Poindexter !

--

After selling almost all of my Bosch stuff, I need replacements. New Fein AFMM 18 QSL.



Kind regards,
Oliver

Offline Poindexter

  • Posts: 98
Thanks Oliver!

Had another cool UPS delivery about two weeks ago.  So, I've had some time to use the Jokers and the carver.  Without a doubt Wera makes some nice tools.  These are definitely a nice step up from the Craftsman set I've had forever that is rusting.

The grinder/Arbortech carver is a lot of fun.  It will wear you out though.  Unfortunately the weather hasn't been playing nice to finish my first carving job (not an indoors activity) or I'd share a photo of what's going on.  Pretty excited about the maple because I cut it down nearly 3 years ago and it is spalting nicely at the core.  Should make for an interesting "egg" end table and maybe a bowl.  Ooooor maybe I shouldn't use this wood for the first project  [blink]


Offline charley1968

  • Posts: 441
A Mafell BST 460S.
Just for today..

Online rst

  • Posts: 1337
I bought Hanson 3095001 2-Piece Adjustable Tap Socket from Amazon.  With these to grip the taps I can use my 3/8 drive Milwaukee for tapping or a 3/8 rachet for restricted areas.  You Tube is almost as hard on my bank account as FOG.  Check out this site for some really nifty tapping and drilling tools http://holemaker-technology.com/

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7493
  • Finger Lakes Region, NY State , USA
Some new screwdrivers ..........................................


    I blame you for this, Oliver   [wink]

Aaand that little Wera bit ratchet is looking good so that will probably be next .... so that will be your fault , Peter Parfitt. [smile]


       



Seth

Offline Kev

  • Posts: 7504
Thanks Oliver!

Had another cool UPS delivery about two weeks ago.  So, I've had some time to use the Jokers and the carver.  Without a doubt Wera makes some nice tools.  These are definitely a nice step up from the Craftsman set I've had forever that is rusting.

The grinder/Arbortech carver is a lot of fun.  It will wear you out though.  Unfortunately the weather hasn't been playing nice to finish my first carving job (not an indoors activity) or I'd share a photo of what's going on.  Pretty excited about the maple because I cut it down nearly 3 years ago and it is spalting nicely at the core.  Should make for an interesting "egg" end table and maybe a bowl.  Ooooor maybe I shouldn't use this wood for the first project  [blink]

(Attachment Link)

@Poindexter good to see you embracing Arbortech .. I managed to accidentally combine mine with a old angle grinder I sold (and got less for it that the Arbortech cutter was actually worth) [sad]

I'm looking forward to replacing it soon [smile]

It'd be nice to see what you're carving.

Offline Poindexter

  • Posts: 98

    I blame you for this, Oliver   [wink]


Aaand that little Wera bit ratchet is looking good so that will probably be next .... so that will be your fault , Peter Parfitt. [smile]


Wera should do something for those two.  I blame them too...



Anyone notice the most important tool on that wall?  Hint:  it has a red & yellow handle and serves a single purpose.

Offline HAXIT

  • Posts: 117

    I blame you for this, Oliver   [wink]


Aaand that little Wera bit ratchet is looking good so that will probably be next .... so that will be your fault , Peter Parfitt. [smile]



Wera should do something for those two.  I blame them too...
(Attachment Link)


Anyone notice the most important tool on that wall?  Hint:  it has a red & yellow handle and serves a single purpose.
Wera VDE bottle opener. Of course if you are thirsty, then you cannot work efficiently. So it is important. [big grin] [wink]

Online Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3407
    • New Brit Workshop on YouTube
Some new screwdrivers ..........................................


    I blame you for this, Oliver   [wink]

Aaand that little Wera bit ratchet is looking good so that will probably be next .... so that will be your fault , Peter Parfitt. [smile]
Seth

Hi Seth,

Just as well you have not seen my other Wera video work !

Peter
« Last Edit: March 13, 2017, 01:06 AM by Peter Parfitt »

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Some new screwdrivers ..........................................


    I blame you for this, Oliver   [wink]

Aaand that little Wera bit ratchet is looking good so that will probably be next .... so that will be your fault , Peter Parfitt. [smile]


        (Attachment Link)



Seth

Hi Seth,

Definitely something I gladly take the blame for  [big grin] [big grin]

Great choices by the way! And the pop-up bit-holder is really fun - I got the Snap-On version (same bit-holder, but their colors and "Instinct" handle style)  that Wera makes for them. It's great and fun to play with.

Kind regards,
Oliver

Offline HarveyWildes

  • Posts: 357
Veritas Quick Release Tail Vise
Veritas Bevel Up Jack Rabbet Plane w/ PMV-11 blade
Veritas Small Shoulder Plane w/ PMV-11 blade

Still need to tune up the plane blades.  For the first time ever, though, a Lee valley plane blade did not cut properly out of the box.  The small shoulder plane blade was just slightly off of 90 degrees - enough that the plane would only take shavings on one side.  Should fix up easily.

Offline Trevin

  • Posts: 29
This was the thread I was actually looking for.  I posted this earlier in another thread.

Here is my new toy!


Cannot wait to try her out this weekend.  Or maybe tonight... [big grin]

Trevin

Offline WarnerConstCo.

  • Posts: 4022
    • Warner Mill Works
125a, 100a, 60a, two 20a 3phase breakers. Whooooooo

Offline HarveyWildes

  • Posts: 357
125a, 100a, 60a, two 20a 3phase breakers. Whooooooo

To power all of the motors on your new wood eating monster, I assume?

Offline HarveyWildes

  • Posts: 357
Veritas Quick Release Tail Vise
Veritas Bevel Up Jack Rabbet Plane w/ PMV-11 blade
Veritas Small Shoulder Plane w/ PMV-11 blade

Still need to tune up the plane blades.  For the first time ever, though, a Lee valley plane blade did not cut properly out of the box.  The small shoulder plane blade was just slightly off of 90 degrees - enough that the plane would only take shavings on one side.  Should fix up easily.

I now have improved versions of the two planes that I ordered, now that the blades are honed and adjusted.  Per previous experience, they only needed a little polishing on the back, and then a micro bevel.  The blade angle on the shoulder plane was off by a degree or two, but the micro bevel took care of that.

The Veritas jack rabbet plane is awesome, and the review from @derekcohen gave me even more ideas of things to do with it.  The only thing that I can see that you don't get from this plane is the toothed blades.  I wonder if Veritas would custom tooth a blade or two?

http://www.inthewoodshop.com/ToolReviews/VeritasJackRabbetPlane.html

Offline VW MICK

  • Posts: 768
Got this today

Had a little play seems really nice, easy to use and a nice thin beam

But an absolutely horrendous colour clash with the festools lol. Doesn't even look like I could fit it in a systainer
But to be honest everything fits really nice in the box inc the tripod

Will be cool if the sys light fits on the tripod

Mick

Online Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3407
    • New Brit Workshop on YouTube
That looks great.

There is a good chance that the Syslight will fit as most tripod kit that I have come across (apart from artillery range finders) has a standard thread fitting.

Petetr

Offline six-point socket II

  • Posts: 246
  • aka @the_black_tie_diyer
    • Portfolio
Green laser, cool! So much better to spot than the red one.

Enjoy that awesome Leica!

Sys-Lite and Sys-Rock should fit that tripod, iirc they're all 1/4"

Kind regards,
Oliver

Offline WarnerConstCo.

  • Posts: 4022
    • Warner Mill Works
125a, 100a, 60a, two 20a 3phase breakers. Whooooooo

To power all of the motors on your new wood eating monster, I assume?

100a for the moulder, 60a for a buss duct and the 20's because I found a couple.

I can't afford new ones, the 100a one is 450 bucks.

Offline LooseSox

  • Posts: 28
Forgive me for I have sinned. It's been over a decade since my last Alternative Green (Ryobi) tool purchase, and hopefully it will be another decade before I am tempted again!

In my defense, my main router died last night and I was trying to beat a timeline for delivery of a project. My local big box hardware store opens at 7am Sunday mornings so down I went and grabbed the only 1/2" shank variable speed plunge router they sold. Now I'll need to submit a proposal to the minister of finance and war as to why I need the OF1400.

Offline Kev

  • Posts: 7504
@jmbfestool love the double up. Thanks!

I pretty much stuck mine in storage as soon as it arrived [sad] will get to okay soon!

Have you been tempted to try a DD40?

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7493
  • Finger Lakes Region, NY State , USA
Some evening reading just showed up in the mail ...... now I am in trouble  [eek]






Seth

Offline Trevin

  • Posts: 29
@seth I just ordered the same two catalogs the other day....

 [big grin]

Offline jmbfestool

  • Posts: 6558
@jmbfestool love the double up. Thanks!

I pretty much stuck mine in storage as soon as it arrived [sad] will get to okay soon!

Have you been tempted to try a DD40?

@Kev

Im lost did I post something lol i have look back two pages couldnt find a post
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline Kev

  • Posts: 7504
@jmbfestool love the double up. Thanks!

I pretty much stuck mine in storage as soon as it arrived [sad] will get to okay soon!

Have you been tempted to try a DD40?

@Kev

Im lost did I post something lol i have look back two pages couldnt find a post

@jmbfestool sorry buddy, I was talking about the double up on the Lamello joining you did so you only had a hole on one side of the material .. then I was curious whether you were also thinking about playing with a Mafell dual dowel 40 as I've started to consider one now that I've expanded my thinking from just Domino to Zeta P2 and beyond.