Author Topic: (Yet another) 80/20 MFT/SYS Cart  (Read 60301 times)

0 Members and 1 Guest are viewing this topic.

Offline Richard/RMW

  • Retailer
  • *
  • Posts: 1674
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #90 on: January 02, 2017, 05:50 PM »
Joe, I use a dedicated metal cutting chop saw with an AL blade. As Bryan stated I think you can make the same cut with most any SCMS using the right blade. For reference my 14" Milwaukee dry-cut saw is 1,500 RPM, and the Oshlun blade cuts thru it like butter. I've never used any lube, & again as Bryan stated just cut slowly and let the blade do it's job.

RMW

PS - love your designs/creations.  [not worthy]

   
« Last Edit: January 02, 2017, 05:58 PM by Richard/RMW »
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline deepcreek

  • Posts: 637
    • TimberFire Studio
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #91 on: January 03, 2017, 12:21 AM »
Joe, I use a dedicated metal cutting chop saw with an AL blade. As Bryan stated I think you can make the same cut with most any SCMS using the right blade. For reference my 14" Milwaukee dry-cut saw is 1,500 RPM, and the Oshlun blade cuts thru it like butter. I've never used any lube, & again as Bryan stated just cut slowly and let the blade do it's job.

I have a 14" Dewalt metal chop saw and found that Olshun blade on Amazon along with a 12" version that will fit my old reliable Dewalt 705 miter saw.  (I kept it for cuts I don't want to make on my Kapex.) Now I just have to decide which one will work better!!??

One last question (I think) - What tool did you use to trim the excess profile of the corner brackets?

PS - love your designs/creations.  [not worthy]

Thanks for the kind words.  I love your designs/creations!
Joe Adams
TimberFire Studio
Houston, Texas

http://www.facebook.com/timberfire

Offline deepcreek

  • Posts: 637
    • TimberFire Studio
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #92 on: January 03, 2017, 12:22 AM »
Richard will be able to provide a lot more advise, but I have cut 80/20 using my sliding miter saw.  I use high tooth blade, lock slide and cut very slow.

Thanks, Bryan!
Joe Adams
TimberFire Studio
Houston, Texas

http://www.facebook.com/timberfire

Offline Richard/RMW

  • Retailer
  • *
  • Posts: 1674
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #93 on: January 03, 2017, 01:33 AM »
Portaband mounted in table top setup and a Foredom with carbide burr for cleanup. Those brackets are cast so you can probably get away with a hacksaw and files if need be.

Post pics when you get it done.

RMW

Joe, I use a dedicated metal cutting chop saw with an AL blade. As Bryan stated I think you can make the same cut with most any SCMS using the right blade. For reference my 14" Milwaukee dry-cut saw is 1,500 RPM, and the Oshlun blade cuts thru it like butter. I've never used any lube, & again as Bryan stated just cut slowly and let the blade do it's job.

I have a 14" Dewalt metal chop saw and found that Olshun blade on Amazon along with a 12" version that will fit my old reliable Dewalt 705 miter saw.  (I kept it for cuts I don't want to make on my Kapex.) Now I just have to decide which one will work better!!??

One last question (I think) - What tool did you use to trim the excess profile of the corner brackets?

PS - love your designs/creations.  [not worthy]

Thanks for the kind words.  I love your designs/creations!
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline mindbend

  • Posts: 4
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #94 on: March 07, 2017, 11:35 AM »
Great projet and thread! Any tips/pointers on the best place to purchase these extrusions and connectors?
Thanks,.

Offline Richard/RMW

  • Retailer
  • *
  • Posts: 1674
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #95 on: March 10, 2017, 09:03 AM »
Howdy @mindbend  [welcome] to the FOG.

I get my stuff from 80/20's eBay store.

RMW

Great projet and thread! Any tips/pointers on the best place to purchase these extrusions and connectors?
Thanks,.
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline mindbend

  • Posts: 4
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #96 on: March 10, 2017, 09:14 AM »
Got it! Thanks.

p.s. I've made some corner connectors via my 3D printer that don't need to be hacked/cut. May be advantageous for builders here.

Offline Richard/RMW

  • Retailer
  • *
  • Posts: 1674
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #97 on: March 10, 2017, 09:48 AM »
Got it! Thanks.

p.s. I've made some corner connectors via my 3D printer that don't need to be hacked/cut. May be advantageous for builders here.

Great idea. Have you shared the file anywhere?

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline ryanjg117

  • Posts: 72
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #98 on: March 12, 2017, 04:08 PM »
Got it! Thanks.

p.s. I've made some corner connectors via my 3D printer that don't need to be hacked/cut. May be advantageous for builders here.

Great idea. Have you shared the file anywhere?

RMW

And what material did you use for 3D printing it? My experience with 3D printing is that all of the available polymers are quite weak, especially for any kind of structural use. I did a 3D printing project awhile back using glass reinforced nylon and have found them to still have far too much flex to be suitable for anything like this.
Festools - TS55, OF1400, ETS 150/5, Pro5 LTD, LS 130, Domino DF500, CT36 w/Boom & Dust Deputy, RipDogs, Qwas Dogs, CXS, walls of systainers, custom JumboMFT

Offline Fuji22

  • Posts: 2
Re: (Yet another) 80/20 MFT/SYS Cart
« Reply #99 on: August 24, 2017, 12:08 AM »
@ryanjg117 - What modeling program did you use to create your renders?