|
ericbuggeln
Guest
|
 |
« Reply #60 on: May 18, 2012, 09:14 AM » |
|
Ken, I know Im getting beat up over the stickers but theyre like 1/256". All materilsl I have passed through have not gotten caught on it and all cuts are reading what they are supposed to with a Starrett six inch combo. The sticker is 12' away from the cutter head anyway. The color scheme is  , I think it will make me more creative. I would love to see some pics of your recent build, Eric |
|
|
|
|
Logged
|
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
builderbob
 Offline
Location: Connecticut Member Since: Feb 2007
Posts: 936
|
|
« Reply #61 on: May 18, 2012, 09:22 AM » |
|
Ken, I'll take that cup of coffee & 5 hour energy drink if you're offering!!
B
|
|
|
|
|
Logged
|
Kapex, TS55, Domino, MFK 700, OF 1400, OF 1010, RAS 115, RTS 400, ETS 150/3, ETS 125, CT 22 (2), C 12 (2), T-15+3, T-12+3, PSB 300 & more MFT's than i can count!
|
|
|
|
ericbuggeln
Guest
|
|
« Reply #62 on: May 18, 2012, 09:33 AM » |
|
When Bob comes over and basks in my glory, he will give you the rundown. Hes tied up with his darn family all the time though, Eric
|
|
|
|
|
Logged
|
|
|
|
Ken Nagrod
Restricted
Offline
Location: New Jersey Member Since: Jul 2010
Posts: 3438
|
|
« Reply #63 on: May 18, 2012, 09:45 AM » |
|
Eric, I've been busy building this. Just need some more shims.   |
|
|
|
|
Logged
|
|
|
|
Peter James
Festool Dealer
Offline
Location: USA Member Since: Feb 2012
Posts: 278
Festool Dealer Right Outside NYC - 10,000 Sq Feet
|
|
« Reply #64 on: May 18, 2012, 09:50 AM » |
|
For the win.....
|
|
|
|
|
Logged
|
|
|
|
|
ericbuggeln
Guest
|
|
« Reply #65 on: May 18, 2012, 10:45 AM » |
|
Shouldve had better layout, IMO, Eric
|
|
|
|
|
Logged
|
|
|
|
|
ericbuggeln
Guest
|
|
« Reply #66 on: May 18, 2012, 02:28 PM » |
|
Dave and Seth both demanded a higher level of inner drawer organization; and rightfully so! Here is the first task. I had a shop set and a boxvan set until the boxvan set case was in two pieces. Decided to switch them out and put this one in the open drawer on the router table. Didnt have a forstner bit for each side so had to make do.
Dave, sorry about the shadows, i didnt have a skinny pen! Eric
|
|
|
|
|
SRSemenza
Global Moderator
 Online
Location: UNITED STATES (US) Member Since: Jun 2007
Posts: 3996
Finger Lakes Region, NY State , USA
|
|
« Reply #67 on: May 18, 2012, 05:18 PM » |
|
Man I like that fence! What router is in there btw?
That Incra fence is awesome. After using it I would not want anything else unless something new and better comes along. Seth |
|
|
|
|
Logged
|
Seth R. Semenza
S. R. Semenza Woodworking
Festool Service 800-554-8741
|
|
|
SRSemenza
Global Moderator
Online
Location: UNITED STATES (US) Member Since: Jun 2007
Posts: 3996
Finger Lakes Region, NY State , USA
|
|
« Reply #68 on: May 18, 2012, 05:26 PM » |
|
Heck, we don't even have a Fes clock here!!!
You mean like this one  Seth |
|
|
|
Logged
|
Seth R. Semenza
S. R. Semenza Woodworking
Festool Service 800-554-8741
|
|
|
SRSemenza
Global Moderator
Online
Location: UNITED STATES (US) Member Since: Jun 2007
Posts: 3996
Finger Lakes Region, NY State , USA
|
|
« Reply #69 on: May 18, 2012, 05:29 PM » |
|
Eric, I've been busy building this. Just need some more shims. [ ERROR: SPECIFIED ATTACHMENT MISSING ] Get the plastic ones, I here they don't compress as much You also need a 26" square  Seth |
|
|
|
|
Logged
|
Seth R. Semenza
S. R. Semenza Woodworking
Festool Service 800-554-8741
|
|
|
|
ericbuggeln
Guest
|
|
« Reply #70 on: May 18, 2012, 05:30 PM » |
|
Oh, DUDE!!!! You probably never have to reset it right?
|
|
|
|
|
Logged
|
|
|
|
SRSemenza
Global Moderator
Online
Location: UNITED STATES (US) Member Since: Jun 2007
Posts: 3996
Finger Lakes Region, NY State , USA
|
|
« Reply #71 on: May 18, 2012, 05:40 PM » |
|
Oh, DUDE!!!! You probably never have to reset it right?
The clock?, Right, but it only gives time for the time zone in Germany.  It will run off the drill batteries, car charger and wall charger..................... oh wait , that's the Syslite.  BTW, I like the stickers, they look sharp. You can always scrape them off if they cause trouble. Seth |
|
|
|
|
Logged
|
Seth R. Semenza
S. R. Semenza Woodworking
Festool Service 800-554-8741
|
|
|
Ken Nagrod
Restricted
Offline
Location: New Jersey Member Since: Jul 2010
Posts: 3438
|
|
« Reply #72 on: May 18, 2012, 08:04 PM » |
|
Eric, I've been busy building this. Just need some more shims. [ ERROR: SPECIFIED ATTACHMENT MISSING ] Get the plastic ones, I here they don't compress as much You also need a 26" square Seth Funny Seth, but we're on the same wavelength. All I use are the plastic shims when possible and I've had the 26" square since its inception. Also have the 18" triangle, but that 26" is great for guide rails and sheet goods along with my 50 1/2" / 1282mm rule. I might add some extra bracing to that tower. |
|
|
|
|
Logged
|
|
|
|
Peter James
Festool Dealer
Offline
Location: USA Member Since: Feb 2012
Posts: 278
Festool Dealer Right Outside NYC - 10,000 Sq Feet
|
|
« Reply #73 on: May 18, 2012, 08:50 PM » |
|
Heck, we don't even have a Fes clock here!!!
You mean like this one Seth Looks like the one on my wrist lol! Or you can wear it like Flavor Flav? |
|
|
|
|
Logged
|
|
|
|
|
|
|
ericbuggeln
Guest
|
|
« Reply #75 on: May 19, 2012, 09:28 AM » |
|
Kev, thats your people, no? I had great reviews when I got it. Obviously above the table controls would be nicer. Its not bad enough to get a new one now, Eric
|
|
|
|
|
Logged
|
|
|
|
Kev
Online
Location: Australia Member Since: Nov 2011
Posts: 2430
|
|
« Reply #76 on: May 19, 2012, 09:54 AM » |
|
Kev, thats your people, no? I had great reviews when I got it. Obviously above the table controls would be nicer. Its not bad enough to get a new one now, Eric
Triton? That's that buck toothed ugly distant cousin nobody wants to admit is part of the family here! You would find Triton sold here at Bunnings, which is the Australian hardware discount "superstore". |
|
|
|
|
Logged
|
|
|
|
|
ericbuggeln
Guest
|
|
« Reply #77 on: May 19, 2012, 10:00 AM » |
|
I got a pair of Triton Multistands through Festool Junkie years ago. They are the most amazing concept for assisting with unwieldy pieces that hang off you regular supports. Problem is the hardware was all shot after the first couple of uses. Timmy C sent me two new ones and told me to keep the extras, so I now have four, three have c clamps that have to be tightened with a screw driver rather then by hand. The top also could not sit parallel with the floor unless some grinding was done??? Still great design when you need something like that, Eric
|
|
|
|
|
Logged
|
|
|
|
Kev
Online
Location: Australia Member Since: Nov 2011
Posts: 2430
|
|
« Reply #78 on: May 19, 2012, 10:46 AM » |
|
I got a pair of Triton Multistands through Festool Junkie years ago. They are the most amazing concept for assisting with unwieldy pieces that hang off you regular supports. Problem is the hardware was all shot after the first couple of uses. Timmy C sent me two new ones and told me to keep the extras, so I now have four, three have c clamps that have to be tightened with a screw driver rather then by hand. The top also could not sit parallel with the floor unless some grinding was done??? Still great design when you need something like that, Eric
That pretty much sums up most of the Triton inventions (and to a large extent Australian inventions). Very clever in initial concept, but a lack of serious commercialisation ... normally done on the cheap ... followed by a lack of product evolution, quality control and management. I had one of the early Triton saw tables. Back then having a saw table you could dismantle and could power with a hand tool was a genuine innovation. Then I got the stand alone router table - junk, the table saw extension - more junk, superjaws - mixed thoughts on that. Then mother nature decides to have her say and the painted surfaces start to bubble and the various pieces rust and corrode ... because it's all made cheaply. Australian inventors and craftsmen are some of the best and brightest in the world - but there's something that's just not right when it turns into a serious commercial concern. A few products have defied the voodoo. But just to finish them off we've made it very attractive for everything to be manufactured offshore  |
|
|
|
|
Logged
|
|
|
|
Timtool
Retailer
Offline
Location: Belgium Member Since: Mar 2011
Posts: 722
|
|
« Reply #79 on: May 19, 2012, 11:41 AM » |
|
Very nice table this is, if i had the space i would certainly make something similar. the limited travel of my router table fence is sometimes limiting. Actually your giving me ideas of combining such a wide router table with a roll around workbench, though i would personally be more subtle with the green  well maybe not if i could actually find a green that is close enough to the real deal! |
|
|
|
|
Logged
|
TS55R, CT22E, CTLmini, Kapex KS120, ETS125, ETS150/5, RO150, RO90, CXS-set, T-15+3 set, DTS400, OF1010, OF2200 set, Carvex PS420 EBQ set, Centrotec installer set, LR32-sys, FS-800, FS-LR-1400x2, domino 500+domino sys, domino 700 XL, Surfix-sys, Sys-box 1, Syslite, LEV-350, Sys-box,MFTB/1-2-4... MFTC
|
|
|
|
ericbuggeln
Guest
|
|
« Reply #80 on: May 19, 2012, 11:48 AM » |
|
Tim, the green promotes happy thoughts. When Bob gets over here, he will tell you guys, Eric
|
|
|
|
|
Logged
|
|
|
|
builderbob
Offline
Location: Connecticut Member Since: Feb 2007
Posts: 936
|
|
« Reply #81 on: May 19, 2012, 05:26 PM » |
|
It'll be tough to say cuz I'm always happy anyway!!!
But I'll give me thoughts on the cart as I already have the smaller version of the Incra Fence!
Bob
|
|
|
|
|
Logged
|
Kapex, TS55, Domino, MFK 700, OF 1400, OF 1010, RAS 115, RTS 400, ETS 150/3, ETS 125, CT 22 (2), C 12 (2), T-15+3, T-12+3, PSB 300 & more MFT's than i can count!
|
|
|
|
