Author Topic: CT36 + a busted dust deputy + some scrap form ply =  (Read 1112 times)

0 Members and 1 Guest are viewing this topic.

Offline LooseSox

  • Posts: 71
CT36 + a busted dust deputy + some scrap form ply =
« on: June 15, 2017, 06:42 AM »
This! The bloody labradors got to the buckets of my DD unit a few months ago rendering it useless. I'm filling a 36L bag in under 2 weeks lately so thought it high time to fix the setup. I was originally hoping to order the festool box from Onieda and do it that way but posting international is just too much like hard work for most tool companies in America it seems!

After that idea fizzled out, I raided some scrap form ply left over from a recent project and made myself a plate that would sit atop the CT36. Then made a box for that. Only has a 19L capacity but I was limited to the sizes of ply I had on hand as I didn't want to spend much on this project as I need to buy some more festool rails soon.

The inside seams are siliconed up and the lid has a rabbet around the edge to house some foam rubber stripping to ensure the lid seals tight. The only things I needed to buy were the 4 clasps for the lid and the foam rubber strip. $22 later and I've got my own DD Deluxe that is somewhat more labrador proof than my last one!

And just before anyone asks... the right angle adaptors on each end of the main hose are anti-static and the hose has metal reinforcement that has been exposed on each end to make contact with the adaptors. I didn't bother joining the connection between the adaptor and the hose to the tool as I don't have a 36mm AS hose, the standard one straight into the CT36 hasn't failed me yet. The only time thw green hose comes out to play is when the TS or trimmer is in use.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline derekcohen

  • Posts: 140
    • In The Woodshop
Re: CT36 + a busted dust deputy + some scrap form ply =
« Reply #1 on: June 16, 2017, 02:19 AM »
It's an excellent idea, and I may build my own.

However, it is not the box that needs to be static free! It is the hose and hose fittings, and the DD - those need to be static free.

This is an older photo I have. It uses a carbon-impregnated Dust Commander, with anti-static couplings and hoses. I have since changed the plastic bin for a steel bin.



Regards from Perth

Derek

Offline Bohdan

  • Posts: 772
Re: CT36 + a busted dust deputy + some scrap form ply =
« Reply #2 on: June 16, 2017, 05:26 AM »
My version done with a couple of 20 ltr drums.

264476-0

I used 2" PVC pressure pipe and fittings and just ran a wire from the CT to the metal drum and on to the hose for static control. The pipe connections to the CT and DD are slightly tapered to fit.

The two drums are used to make it easy to empty. The first drum is screwed to the piece of ply which is shaped to fit the CT's locks and the second one just sits in it and is lifted out for emptying.