Author Topic: Festool VAC SYS Cart Part 2  (Read 1142 times)

0 Members and 1 Guest are viewing this topic.

Offline jericho

  • Posts: 18
Festool VAC SYS Cart Part 2
« on: June 06, 2017, 03:54 PM »
Hey Guys,

     Two or three weeks ago I posted a cart on here that I made to display and demo the Festool VAC SYS Clamping System. Well as do most things from Festool, after mulling it over for a while and seeing how effective and time saving the VAC SYS is one of the systems followed me home last week and I built my own cart and made a few changes that really fully unleash the potential for this system and also cleans up the look of the cart.
     The first photo shows the store cart and the next two photos show my cart at home. As you can see the first cart has the foot pedal up on top which is fine for a simple store demo but in real world use really does eliminate the ability to free up both hands to grab a piece when placing it on or taking it off of the clamping modules. So, I made the cart six inches wider and made a center compartment that sits within 3/8" off the floor, allowing the cart to still roll freely and use the foot pedal for what it was intended.The center section which is to ultimately accommodate the foot pedal serves another function and that is it allows the plumbing to be neatly tucked away and hidden out of sight or from possible damage.
     The other major change I made to the cart to make it more user friendly for everyday use is I added a "router table" switch so as not to have to bend over and cut the pump on every time I need it on. This also led to me adding some hooks on the right side of the cart to have a cord wrap for the "router table" switch.
     Overall, I think I made a couple of adjustments that will lend itself to a very long term user friendly clamping/work station. I love my VAC SYS!!

 

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Online copcarcollector

  • Posts: 1359
Re: Festool VAC SYS Cart Part 2
« Reply #1 on: June 06, 2017, 03:59 PM »
Nice! I was wondering about the foot pedal location in the store demo table, I like the way you have integrated it into your personal table.