Author Topic: Hand Tool Cabinet Build  (Read 8880 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Hand Tool Cabinet Build
« on: April 07, 2016, 01:42 PM »
I've been working on this loose interpretation of a hand tool cabinet I saw in 2010 on the cover of Wood magazine:
.

I have the base built.  In fact I built it around 5 years ago.  But like many of my projects I start, I put them on the back burner and seem to never complete.  I didn't like the interior of the top cabinet which is basically just shelving.  I wanted a ramped plane till.  In 2013, Mike Pekovich posted some videos of his own build that were to my liking on the FWW website.  I switched gears and pretty much copied the interior of his wall cabinet.  Although mine is built with plywood joined with a combination of pocket screws and dominos, not highfalutin dovetails and through tenons like his.

Aside from fabricating some panels for the top and bottom, I'm more or less done.  I used maple plywood for the carcase and door frames and solid cherry raised panels for the front:




I've got a few more tools to hang but mostly, I'll leave the inside compartments empty for future acquisitions.
« Last Edit: July 31, 2017, 07:39 PM by Jim Kirkpatrick »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Re: Hand Tool Cabinet Build
« Reply #1 on: April 07, 2016, 01:43 PM »
What I wasn't counting on, is how much time goes in to designing and building these little custom tool hangers.  Some of them, I had to build, rebuild and then build again.  The more I did the better I got.












Of course, after I got the shelf installed, I realized I couldn't fit my favorite mallet inside.  There's always work arounds and actually, the hole also holds the mallet in place.  (I designed it like that!):
« Last Edit: April 07, 2016, 05:34 PM by Jim Kirkpatrick »

Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Re: Hand Tool Cabinet Build
« Reply #2 on: April 07, 2016, 01:43 PM »
EDIT:  I finally finished the whole thing.  Shop projects always take a back seat to new projects.  I noted I had signed and dated the inside of the lower cabinet.....2011!  Six years in the making.


« Last Edit: July 31, 2017, 07:36 PM by Jim Kirkpatrick »

Offline mike_aa

  • Posts: 948
Re: Hand Tool Cabinet Build
« Reply #3 on: April 07, 2016, 02:13 PM »
That is one beautiful cabinet.  I love the matched panels on the doors.  Great idea about leaving some space undone for future purchases.

Thanks for sharing and I look forward to the completion.

Mike A.

Offline Runhard

  • Posts: 730
Re: Hand Tool Cabinet Build
« Reply #4 on: April 07, 2016, 02:28 PM »
Jim,

That is impressive. I have all of my hand tools stored in their boxes.  [embarassed]
Daniel

Offline Lemwise

  • Posts: 234
Re: Hand Tool Cabinet Build
« Reply #5 on: April 07, 2016, 02:36 PM »
It always makes me giggle when I see a toolbox full of expensive Lie Nielsen and Veritas stuff. It seems to me a lot of people in the US seem to think you need the most expensive stuff to get a high quality result. You don't. You need skill.

Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Re: Hand Tool Cabinet Build
« Reply #6 on: April 07, 2016, 02:55 PM »
They're not for everyone, Lemwise.

Sent from my SM-N900V using Tapatalk


Offline Kevin Ross

  • Posts: 32
Re: Hand Tool Cabinet Build
« Reply #7 on: April 07, 2016, 03:08 PM »
Jim
Thanks for posting, you've given me a nudge - I have my top built but not quite finished, although currently being used as a wall mount. I like your base and will likely adapt it for my wall cabinet.
Whilst the good quality tools are not essential, they certainly make it easier improve your skills by focussing on technique - as you can't blame the tool.  [wink]
Kev

Offline RussellS

  • Posts: 172
Re: Hand Tool Cabinet Build
« Reply #8 on: April 07, 2016, 03:19 PM »
Just funning with you.  Pocket screws and Dominos to build a hand tool cabinet?  Kind of like Ikea having a man in their factory hand cutting and fitting the parts for their "furniture".  Its a very nice cabinet.

Offline teocaf

  • Posts: 597
Re: Hand Tool Cabinet Build
« Reply #9 on: April 07, 2016, 04:59 PM »
It always makes me giggle when I see a toolbox full of expensive Lie Nielsen and Veritas stuff. It seems to me a lot of people in the US seem to think you need the most expensive stuff to get a high quality result. You don't. You need skill.

Darn those filthy rich Americans with too much money and too little skill...
But seriously, it doesn't take really deep thinking to realize that people buy tools for all kinds of reasons.  They might want something that functions great but also looks good.  They might have gone the cheaper way before and found that now they can afford it, they would endeavor acquiring an upgraded version.  Perhaps they like supporting top craftsmen that share their passion for bringing back quality in things like hand tools.  They might want a high resale value when they decide to move on to other hobbies.  Perhaps they long for leaving something of value and use to future generations in their family.  A great deal of other reasons I'm sure, if one takes but a second to think about it.
So, @Lemwise I guess it makes me giggle when I see someone who thinks there's only their singular reason for buying a tool.  Now that we're both giggling, albeit for different reasons--I find that's a good thing.  Laughter is the best medicine, after all...  And of course the irony doesn't escape me:  Aren't you particularly glad that someone still hires craftsmen to do a beautiful custom job and sees the benefit in the higher cost than getting some off the shelf fiberglass component and bolting it unto their boat?
« Last Edit: April 07, 2016, 05:01 PM by teocaf »

Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Re: Hand Tool Cabinet Build
« Reply #10 on: April 07, 2016, 05:48 PM »
Just funning with you.  Pocket screws and Dominos to build a hand tool cabinet?  Kind of like Ikea having a man in their factory hand cutting and fitting the parts for their "furniture".  Its a very nice cabinet.
There is irony here, yup.  But I wanted a strong, high quality cabinet that will last a lifetime, yet keep the cost down and also minimize time spent on it.  More money to spend on high priced tools!  [poke] [drooling]

Offline Dogberryjr

  • Posts: 87
Re: Hand Tool Cabinet Build
« Reply #11 on: April 07, 2016, 07:33 PM »
It always makes me giggle when I see a toolbox full of expensive Lie Nielsen and Veritas stuff. It seems to me a lot of people in the US seem to think you need the most expensive stuff to get a high quality result. You don't. You need skill.

You do realize you posted this on the FESTOOL Owners Group site, right?

And to the OP, I like your cabinet.

Offline AofD

  • Posts: 61
Re: Hand Tool Cabinet Build
« Reply #12 on: April 07, 2016, 11:14 PM »
Great work on your cabinet.  Nothing wrong with a hybrid approach to woodworking.
TS55REQ, CT26, MFT/3, OF1400, ETS150/3, KAPEX120, T18, Centrotec Installer Set, Domino 500, SysLite and RO90

Offline Kev

  • Posts: 7578
Re: Hand Tool Cabinet Build
« Reply #13 on: April 08, 2016, 01:09 AM »
Nice work [wink]

I'm just trying to recall whether I've seen Japanese saws in a traditional woodworking cabinet like this before .. they jump out at me as a conflict in style (though I think they work well in use).

It always makes me giggle ... when people ask me why I ride an expensive bicycle when I could clearly save thousands of dollars and get the same benefit by losing one of my many extra kilos of body fat and riding a cheaper bike.

Offline RKA

  • Posts: 881
Re: Hand Tool Cabinet Build
« Reply #14 on: April 08, 2016, 07:48 AM »
Looks great Jim!  I'm a few years or decades behind you.  Just ordered my first set of chisels (and I have a hacksaw  and drywall saw...do those count? [eek]).  I haven't given any thought into where these hand tools will be kept.  Love what you've done here! 
-Raj

Offline Festoolfootstool

  • Posts: 2076
  • The trouble with Bob is its all about Bob
Re: Hand Tool Cabinet Build
« Reply #15 on: April 08, 2016, 08:10 AM »
Nice work [wink]

I'm just trying to recall whether I've seen Japanese saws in a traditional woodworking cabinet like this before .. they jump out at me as a conflict in style (though I think they work well in use).

It always makes me giggle ... when people ask me why I ride an expensive bicycle when I could clearly save thousands of dollars and get the same benefit by losing one of my many extra kilos of body fat and riding a cheaper bike.

I have always thought giggling was the preserve of teenage girls..
If the milk turns out to be sour, I ain't the kind of **** to drink it.......

Why do Festool accessories only have a two month guarantee here in the UK ?

Offline Kev

  • Posts: 7578
Re: Hand Tool Cabinet Build
« Reply #16 on: April 08, 2016, 08:13 AM »
I have always thought giggling was the preserve of teenage girls..

No, not necessarily .. now think of all the time you'll save not having to put on make up and a skirt [wink]

Offline Festoolfootstool

  • Posts: 2076
  • The trouble with Bob is its all about Bob
Re: Hand Tool Cabinet Build
« Reply #17 on: April 08, 2016, 08:13 AM »
Great looking cabinet, thanks for sharing.
If the milk turns out to be sour, I ain't the kind of **** to drink it.......

Why do Festool accessories only have a two month guarantee here in the UK ?

Offline Tayler_mann

  • Posts: 413
Re: Hand Tool Cabinet Build
« Reply #18 on: April 08, 2016, 09:19 AM »
Very nice and a very good job with the organization. You have a lot of hand tools...I think your hand tool collection is worth more than my entire arsenal.

Offline VW MICK

  • Posts: 792
Re: Hand Tool Cabinet Build
« Reply #19 on: April 08, 2016, 09:54 AM »
Nice job

I really like that. If I ever finish my sysports might try something like that

although I dont have anything like those nice tools

I did have an idea that when ive bought all the power tools I need I might replace some of my hand tools with some nicer ones. maybe

Offline travisj

  • Posts: 184
Re: Hand Tool Cabinet Build
« Reply #20 on: April 08, 2016, 05:06 PM »
I like the layout and design of your cabinet very much.  What are the approximate dimensions (curious as to the size of the plane on the top shelf)?


Sent from my iPhone using Tapatalk

Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Re: Hand Tool Cabinet Build
« Reply #21 on: April 08, 2016, 06:00 PM »
It's 30" wide.  That's a LN #7.5 on top. 
Thanks for all your kind words, guys!

Sent from my SM-N900V using Tapatalk

Offline Kev

  • Posts: 7578
Re: Hand Tool Cabinet Build
« Reply #22 on: April 08, 2016, 10:18 PM »
@Jim Kirkpatrick

Is there any sneaky storage in behind the inclined plane storage? A hidden whisky cabinet perhaps [wink]

Offline ChrisK1970

  • Posts: 569
  • Wicked Awesome
Re: Hand Tool Cabinet Build
« Reply #23 on: April 08, 2016, 10:27 PM »
Beautiful cabinet! Also, being a fan of Lie Nielsen and Veritas (ofcourse I'm from the US ;) ) I'd love to make something for my small but very specialized planes. Thanks for posting this!
Dark Helmet.....Remember! Evil will always triumph over good. Because good is dumb!

Offline Jamestoolie

  • Posts: 83
Re: Hand Tool Cabinet Build
« Reply #24 on: April 08, 2016, 10:28 PM »
It's 30" wide.  That's a LN #7.5 on top. 
Thanks for all your kind words, guys!

Sent from my SM-N900V using Tapatalk

Nothing wrong with making a well made cabinet for your well made hand tools.  Personally I store all my hand tools in a 5 gallon bucket of water.   [tongue]

Offline neilc

  • Posts: 2098
Re: Hand Tool Cabinet Build
« Reply #25 on: April 08, 2016, 11:40 PM »
Great job Jim. I made a wall cabinet above my benxh and you reminded me of the time to space the tools and make the holders. That was 20 years ago and it's still going strong.

Thanks for the detailed photos.


Offline Tinker

  • Posts: 3495
Re: Hand Tool Cabinet Build
« Reply #26 on: April 09, 2016, 03:50 AM »
It's 30" wide.  That's a LN #7.5 on top. 
Thanks for all your kind words, guys!

Sent from my SM-N900V using Tapatalk

Nothing wrong with making a well made cabinet for your well made hand tools.  Personally I store all my hand tools in a 5 gallon bucket of water.   [tongue]

I gig....... er, ah, I really guffawed over that one. Perhaps a touch of salt as preservative?
Tinker
Wayne H. Tinker

Offline thedude306

  • Posts: 192
Re: Hand Tool Cabinet Build
« Reply #27 on: April 09, 2016, 09:40 AM »
Thanks for posting.  Love to see things that guys make.  The tool talk is great but I love the builds and this cabinet is great.

Brad T.

Offline Tim Raleigh

  • Posts: 3446
    • Oakville Cabinetry
Re: Hand Tool Cabinet Build
« Reply #28 on: April 09, 2016, 11:01 AM »
Jim, thanks for posting.
I gotta make one of these too. I like Andy Rae's version (Jim Toplin's "The Toolbox Book") with updates similar to Greg Penningtons..
All my hand tools are still in cardboard boxes or tool rolls.
Pathetic really.
Tim

Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Re: Hand Tool Cabinet Build
« Reply #29 on: April 12, 2016, 10:36 AM »
@Jim Kirkpatrick

Is there any sneaky storage in behind the inclined plane storage? A hidden whisky cabinet perhaps [wink]
@Kev , Sorry, I missed this first time around.  I thought of a hidden compartment under the ramp till, like Chris Becksvoort's.  But then I'd probably knock the planes off the shelves when opening it so I opted not to.
Besides, I have another hiding place in the opposite corner in an old microscope slide box:

« Last Edit: April 12, 2016, 10:39 AM by Jim Kirkpatrick »

Offline Steve-Rice

  • Posts: 289
Re: Hand Tool Cabinet Build
« Reply #30 on: April 12, 2016, 04:28 PM »
Kirk,

Great job!  Very impressive.

I made one of these myself several years ago. 

Sorry, just another giggling rich American with expensive tools and no skill...    [big grin] [big grin] [big grin]

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ChrisK1970

  • Posts: 569
  • Wicked Awesome
Re: Hand Tool Cabinet Build
« Reply #31 on: April 12, 2016, 04:35 PM »
Wow! A funnel!!!!!
Dark Helmet.....Remember! Evil will always triumph over good. Because good is dumb!

Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Re: Hand Tool Cabinet Build
« Reply #32 on: April 12, 2016, 05:13 PM »
Kirk,

Great job!  Very impressive.

I made one of these myself several years ago. 

Sorry, just another giggling rich American with expensive tools and no skill...    [big grin] [big grin] [big grin]

Very nice, @Steve-Rice !  How do you like your knew-concepts fret saw?  The coping saw I have pictured is just a place holder for one in the future.    [big grin]

@ChrisK1970 , good catch on the funnel.  Makes filling the flask in the plaid sack a snap.   ;)

Offline ChrisK1970

  • Posts: 569
  • Wicked Awesome
Re: Hand Tool Cabinet Build
« Reply #33 on: April 12, 2016, 05:18 PM »
Awesome. Just awesome! It's like I tell my wife....."how the heck else am I supposed to cut straight if Mr Adams isn't helping me?????"
Dark Helmet.....Remember! Evil will always triumph over good. Because good is dumb!

Offline teocaf

  • Posts: 597
Re: Hand Tool Cabinet Build
« Reply #34 on: April 12, 2016, 05:51 PM »
Truly excellent cabinets and tools you guys...thanks for sharing.


And now... I will introduce you to what's in my shop.  Behold:
 




For those following along with this build, I will list the tools used:

4 pieces of Scotch Magic Tape of the organic variety
1 Xacto Limited Edition knife made out of molecularly enhanced aluminum with titanium triple bevel blade
1 OTT Woodpecker's Patented Square for Adhesive Products without which I would not be able to cut my tape perfectly square
and
1 third-hand metal cabinet which was found on the side of the road on trash day and which, as luck would have it, had the perfect size door to adhere the poster to.

Would love all questions and comments whereby I might describe my craftsmanship in more detail.

Offline neilc

  • Posts: 2098
Re: Hand Tool Cabinet Build
« Reply #35 on: April 12, 2016, 07:39 PM »
Jim -

I have the Knew Concepts Fret saw.  Really like it a lot.  Use it mostly for cutting pins and tails out on dovetails.  But I've also installed a metal blade in it and used it on aluminum and brass.

Highly recommended.

Offline Kev

  • Posts: 7578
Re: Hand Tool Cabinet Build
« Reply #36 on: April 12, 2016, 08:25 PM »
Wow! A funnel!!!!!
@ChrisK1970
You don't want to waste anything filling up the hip flask [wink]

Offline Steve-Rice

  • Posts: 289
Re: Hand Tool Cabinet Build
« Reply #37 on: April 12, 2016, 09:39 PM »
Kirk,

I have to agree with Neilc, it's the best fret saw I ever used. Tightens up very nicely.

Offline Kev

  • Posts: 7578
Re: Hand Tool Cabinet Build
« Reply #38 on: April 13, 2016, 01:32 AM »
Kirk,

I have to agree with Neilc, it's the best fret saw I ever used. Tightens up very nicely.
@Steve-Rice

I've been drooling over the Ti birdcage fretsaws. If they only made the 5" I would have grabbed it already, but the 3", 5", 8" range has me stumped (if they sold them as a discounted set I'd probably have jumped).

It'd be easy to spend thousands on the Knewconcepts web store [embarassed]

Anyone upgraded to an Elkhead handle? ... that'd really disturb @Lemwise [big grin] I'd like the idea of a handle thats a little fatter at the base for grip and control - with my big fat paws.



Offline Bohdan

  • Posts: 766
Re: Hand Tool Cabinet Build
« Reply #39 on: April 13, 2016, 02:21 AM »

It always makes me giggle ... when people ask me why I ride an expensive bicycle when I could clearly save thousands of dollars and get the same benefit by losing one of my many extra kilos of body fat and riding a cheaper bike.

@Kev Its because with the expensive bike it's so much easier that you can save loosing those extra kilos.

Online Cheese

  • Posts: 3153
Re: Hand Tool Cabinet Build
« Reply #40 on: April 13, 2016, 09:07 AM »
Jim...
First time I've seen this post, the cabinet is great but I'm even more impressed with the time spent on the tool holders. The spoke shave rack and the awl rack jump out at me. The tool holders probably took longer than making the box. [eek] Nice job!

Offline neilc

  • Posts: 2098
Re: Hand Tool Cabinet Build
« Reply #41 on: April 13, 2016, 10:28 AM »
Kirk,

I have to agree with Neilc, it's the best fret saw I ever used. Tightens up very nicely.
@Steve-Rice

Anyone upgraded to an Elkhead handle? ... that'd really disturb @Lemwise [big grin] I'd like the idea of a handle thats a little fatter at the base for grip and control - with my big fat paws.


I have the Elkhead handle.  Beautiful and comfortable addition.  I think I went with the medium size.


Offline iamnothim

  • Posts: 1422
Re: Hand Tool Cabinet Build
« Reply #42 on: April 13, 2016, 01:30 PM »
Jim !!!!

Top shelf!
Amazing!

I am ... in awe and jealous.

My reputation pre-deceases me.

Offline Mitchewd

  • Posts: 60
Re: Hand Tool Cabinet Build
« Reply #43 on: April 14, 2016, 10:33 PM »
Excellent job, I love it!  Keep it up!

Offline jobsworth

  • Posts: 4336
  • Burger Babe Says: I Even Buy Green Bananas
Re: Hand Tool Cabinet Build
« Reply #44 on: April 15, 2016, 01:17 PM »
Where do you plug the cords in at?
Loving the Calif sun....

Offline Steve-Rice

  • Posts: 289
Re: Hand Tool Cabinet Build
« Reply #45 on: April 15, 2016, 02:22 PM »
Thanks, Cheese - but I'm sure Lemwise is just having some fun with his American friends...

I got a good laugh out of it!

Offline Holmz

  • Posts: 3684
Re: Hand Tool Cabinet Build
« Reply #46 on: April 15, 2016, 08:01 PM »
Where do you plug the cords in at?

It would be funny with a Plugit.

It is a nice looking chest, both outside and in.
That is a lot of $ in planes.

Offline VW MICK

  • Posts: 792
Re: Hand Tool Cabinet Build
« Reply #47 on: April 16, 2016, 04:12 AM »
Wow @Steve-Rice

That is impressive

We don't have cabinets like that in the uk. We are too busy building sys ports for all our NAINA lol

Joking aside that's a nice cabinet and contents

Offline Kev

  • Posts: 7578
Re: Hand Tool Cabinet Build
« Reply #48 on: April 16, 2016, 05:08 AM »
Thanks, Cheese - but I'm sure Lemwise is just having some fun with his American friends...

I got a good laugh out of it!
@Lemwise doesn't even have any chisels .. just uses a really sharp shovel [wink]

Offline iamnothim

  • Posts: 1422
Re: Hand Tool Cabinet Build
« Reply #49 on: April 16, 2016, 10:50 AM »
I have to elaborate why I find this cabinet a marvel.  The stuff I have made is big with a fraction of the joints found in Jim’s cabinet.  The only small thing I made was a craftsman lamp (thread someplace) and it was far far from clean.

There are like a jillion joints with cross dividers here.  They are all square and true.  There are also a whole bunch of odd shaped small pieces of matching sizes.  Small pieces are not easy at all and end grain makes them even more difficult to come out clean.   I cringe when I have to get rid of router burn on end grain.

This piece is the product of a true craftsman.
My reputation pre-deceases me.

Offline Steve-Rice

  • Posts: 289
Re: Hand Tool Cabinet Build
« Reply #50 on: April 16, 2016, 11:03 AM »
@VW MICK  and @Holmz,  Thanks for the kind words.

Much appreciated,

Steve
« Last Edit: April 16, 2016, 11:08 AM by Steve-Rice »

Offline Lemwise

  • Posts: 234
Re: Hand Tool Cabinet Build
« Reply #51 on: April 16, 2016, 03:13 PM »
Thanks, Cheese - but I'm sure Lemwise is just having some fun with his American friends...

I got a good laugh out of it!
I was just trolling a bit  ;D

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7767
  • Finger Lakes Region, NY State , USA
Re: Hand Tool Cabinet Build
« Reply #52 on: April 16, 2016, 03:16 PM »
Nice cabinet , Jim.

I sort of like the slightly modern clean take combined with the "old" tools look.

Seth

Offline iamnothim

  • Posts: 1422
Re: Hand Tool Cabinet Build
« Reply #53 on: April 16, 2016, 03:44 PM »
I was just trolling a bit  ;D

Why don't you post when, on the off chance, you have something pertinent to add to the thread.  Or start a joke thread since you havent built anything

My reputation pre-deceases me.

Online Peter Halle

  • Global Moderator
  • *
  • Posts: 10611
  • Let's Redux / Revive / Rewind / Rollback the FOG!
Re: Hand Tool Cabinet Build
« Reply #54 on: April 16, 2016, 04:27 PM »
Please let's us not take this build thread down a rabbit hole and rather continue to focus on the project originally posted.

Peter
Scraps to Smiles.  To be continued.....  Stay Tuned.

Offline alkaline

  • Posts: 361
Re: Hand Tool Cabinet Build
« Reply #55 on: April 18, 2016, 01:48 PM »
...brilliant collection, brilliant work. Congratulations.

 [thumbs up]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Jim Kirkpatrick

  • Posts: 987
    • Jim Kirkpatrick Woodworking
Re: Hand Tool Cabinet Build
« Reply #56 on: July 31, 2017, 07:38 PM »
I'm ashamed to say it but I just now finished the project in this old thread today.  I posted some finished pictures in the 3rd post at the top.   [embarassed]
« Last Edit: July 31, 2017, 08:34 PM by Jim Kirkpatrick »

Offline RobBob

  • Posts: 1102
Re: Hand Tool Cabinet Build
« Reply #57 on: July 31, 2017, 08:00 PM »
Jim, it's beautiful!  Very, very nice.  You should be proud of it.  That's a family heirloom.

Offline HarveyWildes

  • Posts: 501
Re: Hand Tool Cabinet Build
« Reply #58 on: July 31, 2017, 10:04 PM »
I'm ashamed to say it but I just now finished the project in this old thread today.  I posted some finished pictures in the 3rd post at the top.   [embarassed]

Great work - sounds like my kind of schedule.