Author Topic: H&K Custom Barn Doors  (Read 20403 times)

0 Members and 1 Guest are viewing this topic.

Offline Scorpion

  • Posts: 514
Re: H&K Custom Barn Doors
« Reply #60 on: July 06, 2017, 11:44 PM »
Thank you for the kind words. In regards to the glass, I've installed it several ways.  For a "permanent" and much cleaner look a slot routed into the door frame with some silicone works quite well.  For a more "traditinal" look a rabbet is put on the frame with trim pieces holding the glass in place.  Glass is easily accessible in the event it needs replacement. 

Tempered glass is quite strong though.  Had a door standing up against my garage (not in the best angle) and as luck would have it...fell over.  I surely expected the glass was broken...but it didn't.  Large piece of Flemish glass about 6' tall and 3' wide...not a crack.

Thanks for the info.  Makes perfect sense.  Had no idea that tempered glass was used but makes sense now that you mention it.  Please keep sharing your creations!


Sent from my iPhone using Tapatalk

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #61 on: July 08, 2017, 11:10 AM »
Slant bypass doors installed this morning...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #62 on: July 11, 2017, 12:06 AM »
Late night working on SEVEN doors...


Offline Scorpion

  • Posts: 514
Re: H&K Custom Barn Doors
« Reply #63 on: July 11, 2017, 02:39 AM »
Late night working on SEVEN doors...

What's the last one (white with glass) rails made out of?  I can just barely see the bottom behind the clamp and it almost looks like steel webbing.


Sent from my iPhone using Tapatalk

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #64 on: July 13, 2017, 01:36 PM »
Ready for install...


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #65 on: July 13, 2017, 03:09 PM »
Forgot that one of the doors has a twin...


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #66 on: July 15, 2017, 06:12 AM »
Late night installing three glass doors...they came out nice!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #67 on: July 26, 2017, 12:39 PM »
9' and 8' doors...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #68 on: July 29, 2017, 07:57 AM »
Reclaimed barn wood delivered today...late 1800's barn wood from Wichita, KS...


Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: H&K Custom Barn Doors
« Reply #69 on: July 29, 2017, 01:25 PM »
How cool, you use real old reclaimed wood.
You still have your day job, seems hard to combine with the amount of doors you crank out 😂


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #70 on: July 30, 2017, 09:00 PM »
Fortunately my schedule has me working 14 days a month, so I'm off two weeks a month (12-hour shifts)


Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: H&K Custom Barn Doors
« Reply #71 on: July 31, 2017, 04:01 AM »
That's a super schedule!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #72 on: July 31, 2017, 12:18 PM »
I concur!

Built today....the HUGE door is 8' x 7'!
« Last Edit: July 31, 2017, 01:06 PM by TXFIVEO »

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #73 on: July 31, 2017, 10:30 PM »
More doors and an accent wall...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #74 on: August 01, 2017, 08:13 PM »
1800's barn beam turned into a mantel...


Offline HowardH

  • Posts: 1095
Re: H&K Custom Barn Doors
« Reply #75 on: August 02, 2017, 10:37 PM »
Fortunately my schedule has me working 14 days a month, so I'm off two weeks a month (12-hour shifts)

Just don't speed through Allen Texas when he's on duty...  [big grin]
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

mft1080, Trion, MFT/3, T15, OF 1400, RO150FEQ, TS55, RTS400, CT22, 800, 1080, 1400, 1900 rails, CSX, Vecturo, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, Kreg router table

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #76 on: August 03, 2017, 03:55 PM »
Haha...you won't get a ticket but a business card!   [eek]

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #77 on: August 03, 2017, 10:08 PM »
Just installed these 9' and 8' doors....came out really nice!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #78 on: August 05, 2017, 09:05 AM »
Installed last night...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #79 on: August 09, 2017, 07:07 AM »
Two doors to be installed this evening...one "standard" door and the other an 8' x 7' monster!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #80 on: August 09, 2017, 10:41 AM »
Better pic of the two doors...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #81 on: August 09, 2017, 11:00 PM »
Installed...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #82 on: August 19, 2017, 12:54 AM »
And another set up and rolling...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #83 on: August 20, 2017, 10:28 PM »
Reclaimed wood sign made for a local school for first day of school...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #84 on: August 23, 2017, 08:36 PM »
In progress...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #85 on: September 01, 2017, 11:26 AM »
Ready for install...

Offline Tinker

  • Posts: 3544
Re: H&K Custom Barn Doors
« Reply #86 on: September 01, 2017, 02:45 PM »
Haha...you won't get a ticket but a business card!   [eek]

When I got  mustered out of the army, I happened to be in a neighboring town in an area I had been familiar with a couple of years previously, before my 2 years vacation paid for by my "friends and neighbors."  Things had changed in those two years.  I happened to turn onto a street I had traveled many times in the  past, only this time, it was ONE WAY in the opposite direction  I was traveling.  At the end of the street the traffic light turned red and so I stopped.  There happened to be a police officer standing at the corner.  While I was stopped, the officer strolled over to my car and asked, very casually, "Would you like to buy a couple of tickets to the Policemen's ball?"  "Yes Sir.  And how much are they?"
Tinker
Wayne H. Tinker

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #87 on: September 01, 2017, 08:27 PM »
Two doors done and ready for install tomorrow...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #88 on: September 02, 2017, 01:09 PM »
Up and rolling...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #89 on: September 09, 2017, 08:22 AM »
3 more doors up...customer picked up the hardware and will paint doors...