Author Topic: H&K Custom Barn Doors  (Read 20534 times)

0 Members and 1 Guest are viewing this topic.

Offline TXFIVEO

  • Posts: 80
H&K Custom Barn Doors
« on: February 12, 2017, 12:03 PM »
Built mostly with Festool tools..


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Billedis

  • Posts: 583
Re: H&K Custom Barn Doors
« Reply #1 on: February 12, 2017, 02:48 PM »
Very nice.  Is that one piece of glass per door, or 6?  Thank you for sharing.  Bill

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #2 on: February 12, 2017, 04:30 PM »
 Thanks you. It's one piece.

Offline ear3

  • Posts: 3349
Re: H&K Custom Barn Doors
« Reply #3 on: February 12, 2017, 05:33 PM »
Great work.  Is that oak?  It's a bit hard to tell.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • DX 93 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline JSlovic

  • Posts: 92
Re: H&K Custom Barn Doors
« Reply #4 on: February 12, 2017, 07:09 PM »
Nice Work!
Love the hardware- what brand is it?

Offline overanalyze

  • Posts: 409
Re: H&K Custom Barn Doors
« Reply #5 on: February 12, 2017, 08:33 PM »
Very nice!! We really need a like or thanks button for this forum!

Sent from my SM-T310 using Tapatalk


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #6 on: February 12, 2017, 09:44 PM »
I appreciate the kind remarks. The doors are made with Flemish glass and Poplar timber.

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #7 on: February 12, 2017, 11:22 PM »
Here are a couple more...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #8 on: February 13, 2017, 10:35 AM »
Gotta love the TS75 and Domino XL...


Offline Lbob131

  • Posts: 434
Re: H&K Custom Barn Doors
« Reply #9 on: February 14, 2017, 06:50 PM »
Those look stunning.  :)

Offline Holmz

  • Posts: 3972
Re: H&K Custom Barn Doors
« Reply #10 on: February 14, 2017, 07:18 PM »
It is these sorts of posts that I like and that bring a smile to me.

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #11 on: February 15, 2017, 03:48 PM »
Thanks for all the kind remarks guys.  I've picked up a lot of tricks of the trade because of this forum and thanks to the great Festool products it has allowed me to save a ton of time (TS75, Domino XL700!).  As a side business (primary employment is police work) Festool and this forum has allowed my side business to flourish quite nicely. 

Offline Gr8trim4u

  • Posts: 42
Re: H&K Custom Barn Doors
« Reply #12 on: February 18, 2017, 06:00 AM »
Thanks for all the kind remarks guys.  I've picked up a lot of tricks of the trade because of this forum and thanks to the great Festool products it has allowed me to save a ton of time (TS75, Domino XL700!).  As a side business (primary employment is police work) Festool and this forum has allowed my side business to flourish quite nicely.

Very nice work. If this is something you love? Be careful the side business will soon become your only business and you will not have to work a day in your life. Some of us our lucky and get to do what we do for a living and are paid well for it.
Not my first rodeo!!!

Offline jeep jake

  • Posts: 246
Re: H&K Custom Barn Doors
« Reply #13 on: February 19, 2017, 02:54 PM »
what hardware are you using? and have you tried any other manufactures.

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #14 on: February 22, 2017, 06:16 PM »
I've used a variety of hardware depending on client's wants.

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #15 on: February 26, 2017, 03:24 PM »

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #16 on: February 28, 2017, 08:35 PM »
Wedding venue I did work at...all doors and some other items.

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #17 on: March 03, 2017, 05:09 PM »
Media/Mancave door...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #18 on: March 14, 2017, 08:10 PM »
Reclaimed wood headboard that will serve double duty. When in the closed position, headboard, when in the open they will act as window shutters for windows on each side of the bed. 

Satin glass sliding closet door in the making...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #19 on: March 21, 2017, 10:07 PM »
Satin glass sliding door build...

Offline Bubbacuse77

  • Posts: 8
Re: H&K Custom Barn Doors
« Reply #20 on: March 21, 2017, 11:50 PM »
Very nice, where do you get the hardware from.  Specifically the wheels on the track.  I haven't been able to find a five spoke design like them before.

Offline magellan

  • Posts: 143
Re: H&K Custom Barn Doors
« Reply #21 on: March 22, 2017, 09:14 AM »
Very nice work.  I have a couple of questions for you if I may ask. How much larger do you build the sliding doors compared to the opening size?   Is there a standard that you follow for sizing the doors width and height in comparison to the opening?

Thank you

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #22 on: March 22, 2017, 04:00 PM »
Thank you for the kind words.  Here is a "cheat sheet" that I use...

Offline magellan

  • Posts: 143
Re: H&K Custom Barn Doors
« Reply #23 on: March 22, 2017, 05:15 PM »
TXFIVEO

thank you for the info.  Hopefully this yr some time I'll be doing a remodeling of a few rooms and I believe I'll be building a few sets of doors.   Have you used Rustica Hardware for any of your hardware?   They seem to have a wide range of choices.  I've not looked anywhere else, I know their products from their never ending emails.  They do seem to be quality hardware

Thanks again

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #24 on: March 23, 2017, 02:18 AM »
Very nice, where do you get the hardware from.  Specifically the wheels on the track.  I haven't been able to find a five spoke design like them before.

Aba-hardware.com

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #25 on: March 25, 2017, 03:53 PM »
Satin glass sliding door completed.  Will install tomorrow.  Used 1.5" thick Poplar for the timber and the door will sit lower at the customer's residence. Just put it on my track as a mock fitting. 

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #26 on: March 26, 2017, 07:56 PM »
Installed...

Offline neilc

  • Posts: 2159
Re: H&K Custom Barn Doors
« Reply #27 on: April 02, 2017, 05:36 PM »
Nice work!  Really like the look of barn doors!

I see the clips on the outside of the doors at the floor.  I assume you have some kind of spacer against the wall to prevent them from brushing the wall or door frame?  Are those metal with a plastic protector?  Just thinking about protecting the finish from opening and closing.

I'm also curious about these kinds of doors with kids who might open or close them too quickly and whether you've ever had them come off the track.

Thanks for sharing!



Online Cheese

  • Posts: 3598
Re: H&K Custom Barn Doors
« Reply #28 on: April 02, 2017, 06:24 PM »
Love the satin glass sliding door...that's more my style. Nice stuff [thumbs up]

Offline DougB

  • Posts: 14
Re: H&K Custom Barn Doors
« Reply #29 on: April 02, 2017, 09:14 PM »
@neilc The hardware I've used (Custom Service Hardware in WI) include stops that are installed after the door is installed to limit the travel range of the door  Their website has some videos detailing the recommended installation steps.


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #30 on: April 03, 2017, 09:48 AM »
There are "stops" on the track that you set at desired locations to stop the travel of the door so no worries with them sliding off.  The bottom of the door has "stay rollers" to prevent door from swinging out and jumping off track.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #31 on: April 04, 2017, 06:27 PM »
Doors in pgroess...these things are HUGE measuring 8.5' tall and 44" wide...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #32 on: April 19, 2017, 10:15 PM »
Knotty Alder doors coming together...


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #33 on: April 24, 2017, 12:55 PM »
Two British Brace doors stained in Medium Brown (Dura Seal) and a "Doggie gate"...

Offline travisj

  • Posts: 184
Re: H&K Custom Barn Doors
« Reply #34 on: April 25, 2017, 01:03 AM »
Beautiful work!


Sent from my iPhone using Tapatalk

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #35 on: April 26, 2017, 12:39 PM »
Thank you!  Here is a HUGE door...7' x 5' wide.   Over 60 dominos in this door.  Here is one of two doors...still have some finishing work but this beast is built. 


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #36 on: April 26, 2017, 06:33 PM »
Shaker style sliding door in progress...top panel is Flemish glass.

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #37 on: May 07, 2017, 10:28 PM »
New projects...FIVE 8.5' doors in this Classic French Gray.

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #38 on: May 08, 2017, 01:47 PM »
7' x 5' doors...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #39 on: May 08, 2017, 08:33 PM »
Doggie door installed...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #40 on: May 16, 2017, 04:52 PM »
Four doors painted.   Once paint is dry time to disassemble to install glass inserts then glue up all the dominos.  Lots of glass sliding doors ordered recently...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #41 on: May 17, 2017, 09:15 PM »
8 foot door with frosted glass panels...

Offline magellan

  • Posts: 143
Re: H&K Custom Barn Doors
« Reply #42 on: May 18, 2017, 06:07 AM »
I see in the one picture of the painted doors stacked on the floor that you use a triangular item attached to the tops and bottoms.  May I ask what are they?

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #43 on: May 18, 2017, 06:29 PM »
Stak-Racks...come in pretty handy for painting doors and trim.

 

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #44 on: May 31, 2017, 09:07 AM »
Latest installs....

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #45 on: June 05, 2017, 01:17 PM »
Bypass doors....

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #46 on: June 06, 2017, 12:05 PM »
Reclaimed door built with Domino XL as usual...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #47 on: June 13, 2017, 05:29 PM »
Dog gates...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #48 on: June 14, 2017, 11:55 PM »
Latest build and install...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #49 on: June 18, 2017, 05:57 AM »
Carriage style doors installed yesterday...


Offline Bob D.

  • Posts: 662
Re: H&K Custom Barn Doors
« Reply #50 on: June 18, 2017, 06:12 AM »
Latest build and install...

Nice. Do you remove the old door strike plate, door stop molding, infill the
hinge mortises and latch hole and then paint or is the client handling that?
-----
It's a table saw, do you know where your fingers are?

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #51 on: June 18, 2017, 09:16 PM »
Depends on the client. Some actually requested the entire door jamb removed and drywalled to remove any existence of a door jamb.   Others just paint over the hinge mortises.   

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #52 on: June 28, 2017, 05:05 PM »
Shaker style sliding door...

Offline HowardH

  • Posts: 1096
Re: H&K Custom Barn Doors
« Reply #53 on: June 28, 2017, 09:22 PM »
Nice job as always, Hiram!  How did you install the track vertically?   ;D ;D  Just kidding...
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

mft1080, Trion, MFT/3, T15, OF 1400, RO150FEQ, TS55, RTS400, CT22, 800, 1080, 1400, 1900 rails, CSX, Vecturo, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, Kreg router table

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #54 on: June 29, 2017, 12:54 PM »
Nice job as always, Hiram!  How did you install the track vertically?   ;D ;D  Just kidding...

Thank you Howard!  I have put your old Festool 1400 through its paces with zero issues.  Works like a champ!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #55 on: July 05, 2017, 03:58 PM »
Glass doors in progress...

Offline Scorpion

  • Posts: 514
H&K Custom Barn Doors
« Reply #56 on: July 06, 2017, 05:53 AM »
Glass doors in progress...

Awesome craftsmanship.  The more I see your stuff the more I'd like to make my own.  Would you mind showing how the glass is retained in your doors?  Can it be replaced if it breaks without destroying the door?  I really like the look but I tend to worry my kids will find a way to test my creation's future serviceability if you know what I mean.  :)


Sent from my iPhone using Tapatalk

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #57 on: July 06, 2017, 08:48 AM »
Thank you for the kind words. In regards to the glass, I've installed it several ways.  For a "permanent" and much cleaner look a slot routed into the door frame with some silicone works quite well.  For a more "traditinal" look a rabbet is put on the frame with trim pieces holding the glass in place.  Glass is easily accessible in the event it needs replacement. 

Tempered glass is quite strong though.  Had a door standing up against my garage (not in the best angle) and as luck would have it...fell over.  I surely expected the glass was broken...but it didn't.  Large piece of Flemish glass about 6' tall and 3' wide...not a crack. 

Online rst

  • Posts: 1551
Re: H&K Custom Barn Doors
« Reply #58 on: July 06, 2017, 04:27 PM »
As I've been doing commercial glass for the last 37 years, I can attest to the toughness of tempered glass.  Tempering glass is similar to tempering and hardening metal.  The glass is heated to high temps and the cooling and time is regulated.  You can wack it with a hammer and it probably with not break, but hit it with something pointed and it will shatter into aquarium gravel, pieces still sharp by not life threatening if contacted.  We used to throw salvaged door glass down a stone embankment about 30' high and usually they would make it to the bottom with shattering.  I actually use a Starrett spring loaded center/marking punch to blow up tempered we put in our dumpster.

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #59 on: July 06, 2017, 06:56 PM »
Thanks for that info.  Makes sense...I have broken a lot of car windows in my "daytime" job getting suspects out of cars.  Makes sense the same style tempered glass is so strong.

Offline Scorpion

  • Posts: 514
Re: H&K Custom Barn Doors
« Reply #60 on: July 06, 2017, 11:44 PM »
Thank you for the kind words. In regards to the glass, I've installed it several ways.  For a "permanent" and much cleaner look a slot routed into the door frame with some silicone works quite well.  For a more "traditinal" look a rabbet is put on the frame with trim pieces holding the glass in place.  Glass is easily accessible in the event it needs replacement. 

Tempered glass is quite strong though.  Had a door standing up against my garage (not in the best angle) and as luck would have it...fell over.  I surely expected the glass was broken...but it didn't.  Large piece of Flemish glass about 6' tall and 3' wide...not a crack.

Thanks for the info.  Makes perfect sense.  Had no idea that tempered glass was used but makes sense now that you mention it.  Please keep sharing your creations!


Sent from my iPhone using Tapatalk

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #61 on: July 08, 2017, 11:10 AM »
Slant bypass doors installed this morning...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #62 on: July 11, 2017, 12:06 AM »
Late night working on SEVEN doors...


Offline Scorpion

  • Posts: 514
Re: H&K Custom Barn Doors
« Reply #63 on: July 11, 2017, 02:39 AM »
Late night working on SEVEN doors...

What's the last one (white with glass) rails made out of?  I can just barely see the bottom behind the clamp and it almost looks like steel webbing.


Sent from my iPhone using Tapatalk

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #64 on: July 13, 2017, 01:36 PM »
Ready for install...


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #65 on: July 13, 2017, 03:09 PM »
Forgot that one of the doors has a twin...


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #66 on: July 15, 2017, 06:12 AM »
Late night installing three glass doors...they came out nice!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #67 on: July 26, 2017, 12:39 PM »
9' and 8' doors...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #68 on: July 29, 2017, 07:57 AM »
Reclaimed barn wood delivered today...late 1800's barn wood from Wichita, KS...


Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: H&K Custom Barn Doors
« Reply #69 on: July 29, 2017, 01:25 PM »
How cool, you use real old reclaimed wood.
You still have your day job, seems hard to combine with the amount of doors you crank out 😂


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #70 on: July 30, 2017, 09:00 PM »
Fortunately my schedule has me working 14 days a month, so I'm off two weeks a month (12-hour shifts)


Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: H&K Custom Barn Doors
« Reply #71 on: July 31, 2017, 04:01 AM »
That's a super schedule!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #72 on: July 31, 2017, 12:18 PM »
I concur!

Built today....the HUGE door is 8' x 7'!
« Last Edit: July 31, 2017, 01:06 PM by TXFIVEO »

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #73 on: July 31, 2017, 10:30 PM »
More doors and an accent wall...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #74 on: August 01, 2017, 08:13 PM »
1800's barn beam turned into a mantel...


Offline HowardH

  • Posts: 1096
Re: H&K Custom Barn Doors
« Reply #75 on: August 02, 2017, 10:37 PM »
Fortunately my schedule has me working 14 days a month, so I'm off two weeks a month (12-hour shifts)

Just don't speed through Allen Texas when he's on duty...  [big grin]
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

mft1080, Trion, MFT/3, T15, OF 1400, RO150FEQ, TS55, RTS400, CT22, 800, 1080, 1400, 1900 rails, CSX, Vecturo, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, Kreg router table

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #76 on: August 03, 2017, 03:55 PM »
Haha...you won't get a ticket but a business card!   [eek]

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #77 on: August 03, 2017, 10:08 PM »
Just installed these 9' and 8' doors....came out really nice!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #78 on: August 05, 2017, 09:05 AM »
Installed last night...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #79 on: August 09, 2017, 07:07 AM »
Two doors to be installed this evening...one "standard" door and the other an 8' x 7' monster!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #80 on: August 09, 2017, 10:41 AM »
Better pic of the two doors...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #81 on: August 09, 2017, 11:00 PM »
Installed...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #82 on: August 19, 2017, 12:54 AM »
And another set up and rolling...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #83 on: August 20, 2017, 10:28 PM »
Reclaimed wood sign made for a local school for first day of school...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #84 on: August 23, 2017, 08:36 PM »
In progress...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #85 on: September 01, 2017, 11:26 AM »
Ready for install...

Offline Tinker

  • Posts: 3548
Re: H&K Custom Barn Doors
« Reply #86 on: September 01, 2017, 02:45 PM »
Haha...you won't get a ticket but a business card!   [eek]

When I got  mustered out of the army, I happened to be in a neighboring town in an area I had been familiar with a couple of years previously, before my 2 years vacation paid for by my "friends and neighbors."  Things had changed in those two years.  I happened to turn onto a street I had traveled many times in the  past, only this time, it was ONE WAY in the opposite direction  I was traveling.  At the end of the street the traffic light turned red and so I stopped.  There happened to be a police officer standing at the corner.  While I was stopped, the officer strolled over to my car and asked, very casually, "Would you like to buy a couple of tickets to the Policemen's ball?"  "Yes Sir.  And how much are they?"
Tinker
Wayne H. Tinker

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #87 on: September 01, 2017, 08:27 PM »
Two doors done and ready for install tomorrow...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #88 on: September 02, 2017, 01:09 PM »
Up and rolling...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #89 on: September 09, 2017, 08:22 AM »
3 more doors up...customer picked up the hardware and will paint doors...

Offline bkharman

  • Posts: 1939
Re: H&K Custom Barn Doors
« Reply #90 on: September 26, 2017, 09:07 PM »
Finally caught up on this thread... incredible work!  Do you only use Dominos or traditional M&T as well?  I am going to be making a frosted glass pantry door soon and love some of the designs.

Thanks for sharing (so many of!) your door projects. Tons of great ideas!!

Cheers. Bryan.


Sent from my iPhone using Tapatalk
People, I just want to say, you know, can we all get along? Can we get along?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #91 on: October 15, 2017, 01:14 PM »
Today's installs...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #92 on: November 07, 2017, 06:40 AM »
Installed this past Sunday...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #93 on: November 13, 2017, 08:32 AM »
Reclaimed barn wood doors ready for install.  Something about working with 150 year old timber...


Offline HowardH

  • Posts: 1096
Re: H&K Custom Barn Doors
« Reply #94 on: November 13, 2017, 09:40 AM »
your Domino is getting a workout...
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

mft1080, Trion, MFT/3, T15, OF 1400, RO150FEQ, TS55, RTS400, CT22, 800, 1080, 1400, 1900 rails, CSX, Vecturo, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, Kreg router table

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #95 on: November 13, 2017, 03:17 PM »
Yes it has!  And running strong.  When I first bought the XL for $1500 I thought I was crazy for spending so much on it.  Now, it's my money maker.  No second thoughts at all!

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #96 on: November 14, 2017, 09:23 AM »
Late night install...

Offline TXFIVEO

  • Posts: 80
Re: H&K Custom Barn Doors
« Reply #97 on: November 15, 2017, 03:33 PM »
Some better pics of these reclaimed barn wood doors...