Author Topic: How to route numerous parallel grooves  (Read 524 times)

0 Members and 1 Guest are viewing this topic.

Offline ColossusX

  • Posts: 190
How to route numerous parallel grooves
« on: June 27, 2019, 08:58 PM »
I just got a new van and am redoing the racking from my old van.  I had screwed strips of plywood to the box sides for my shelves.  But for my new racking I want to route the shelf grooves.  Each box side will be 60" (approx 1500mm) tall with the grooves spaced every 2 1/2 inches (close to 64mm). I need 20 grooves approx 12" long per upright so 40 grooves per box. And anywhere from 6-8 boxes in the van.  Is there a fairly easy way to do this and get accurate results?  I have the Makita cordless palm router with guide rail attachment and a larger dewalt 618 with plunge and fixed bases. Obviously I dont use them much lol 

Thanks.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rst

  • Posts: 2191
Re: How to route numerous parallel grooves
« Reply #1 on: June 27, 2019, 10:04 PM »
Plywood guide fence attached to cleat that fits into the first groove that will place each successive groove at the desired place.  Each groove will place the next.

Offline sandy

  • Posts: 89
Re: How to route numerous parallel grooves
« Reply #2 on: July 06, 2019, 09:13 PM »
As a suggestion, do all of your routing on a sheet that is twice the width of the desired depth, and then cut the sheet in half, as that will insure that the dados will be perfectly aligned with one another.

Sandy