Author Topic: Kitchen counter edge  (Read 1033 times)

0 Members and 1 Guest are viewing this topic.

Offline Holmz

  • Posts: 4010
Kitchen counter edge
« on: September 09, 2017, 04:26 AM »
The Haus-Boss reminded me that we needed to refinish daggy the edge of the kitchen counter. The whole thing is Jarrah veneer, and the counter is Formica with a Jarrah edge strip.

After grousing about what to use for sanding the 1/4 round I got the 3M rubber block, and some 180. The Mirka was already adorned with a 240g screen.

The 3M block was a mongrel and the edge of the paper was loading up quick.
So I recalled the Mirka hand sander which is ~70x200 mm (~3x8").
What an absolute brilliant thing it is. The thing loaded up a bit, and I would take the screen of and it was fine. The whole thing took ~1/2 hour to 45 minutes to prep.

Then put on a 50% thinned coat of spar varnish. Tomorrow a 25%, and then probably 2 top coats.

Festool makes a similar hand block with the vacuum fitting. Whether yellow or green These things are worth the 40-70$ that they cost.
« Last Edit: September 09, 2017, 04:32 AM by Holmz »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.